Enda EI2041 Handleiding

Bekijk gratis de handleiding van Enda EI2041 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over Enda EI2041 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

english

Thank you for choosing ENDA EI2041 INDICATOR.

TECHNICAL SPECIFICATIONS

HOUSING

Housing type

Suitable for flush-panel mounting according to DIN 43 700.

Dimentions

W77xH35xD71mm.

Weight

Approx. 350g (after packaging)

Enclosure material

Self extinguishing plastics.

While cleaning the device, solvents (thinner, gasoline, acid etc.) or corrosive materials must not be used.

ENDA EI2041 PROGRAMMABLE INDICATOR

OUTPUTS

Sensor power supply

All sensor supply outputs maximum 50 mA. (Regulated and isolated).

Out

Relay: 250V AC, 8A (resistive load), NO

Alarm

Relay: 250V AC, 8A (resistive load), NO

Life expectancy for relay

Mechanical 30. Mio. operation; 100.000 operation at 250V AC, 8A resistive load.

CONTROL

Control type

Double set-point and alarm control.

Control algorithm

On-Off control.

Hysteresis

Adjustable between 1 ... 200.

ENVIRONMENTAL CONDITIONS

Height

Max. 2000m.

Ambient/storage temperature

Max. relative humidity

0 ... +50°C/-25 ... +70°C (with no icing).

Rated pollution degree

80% Relative humidity for temperatures up to 31°C, decreasing linearly to 50% at 40°C.

According to EN 60529 Front panel : IP65 Rear panel : IP20

Do not use the device in locations subject to corrosive and flammable gases.

EI2041 cannot be used if measurement category II, III or IV is required.

Supply

90-250V AC 50/60Hz ; 10-30V DC / 8-24V AC SMPS

Power consumption

Max. 7VA.

2.5mm² screw-terminal connections.

Wiring

Date retention

EMC

Safety requirements

EN 61326-1: 2013.

EEPROM (Min. 10 years).

EN 61010-1: 2010 (Pollution degree 2, overvoltage category II, measurement category I).

ELECTRICAL CHARACTERISTICS

Input type

0-1V DC voltage

0-10V DC voltage

0-20mA DC current

4-20mA DC current

Input empedance

Approx. 100kW

Approx. 100kW

Approx. 10W

Approx. 10W

0V

±0,5% (of full scale)

0V

±0,5% (of full scale)

0mA

±0,5% (of full scale)

0mA

±0,5% (of full scale)

1.1V

12V

25mA

25mA

Min.

Max.

Measurement range

Measurement accuracy

While the current measuring mode, input impedance becomes 10Ω . Therefore, in current mode, the device must not be connected any voltage input.

Otherwise, the device is broken. While the device is running in the voltage measurement mode and if required to change to current measurement mode, then

firstly the voltage inputs must be removed and after that, input type must be changed to one of the current measurement modes.

35x77mm sized.

4 digits display.

Display scale can be adjusted between -1999 and 4000.

Decimal point can be adjusted between 1st. and 3rd. digits.

Measurement unit can be displayed.

Selectable four different standard input types (0-20mA, 4-20mA, 0-1V, 0-10V).

User can calibrate the device according to specified input type.

Sampling time can be adjusted in four steps.

Stores maximum and minimum measurement values.

Maximum and minimum values can be storedand displayed.

Two relay output for control and alarm (Optional).

Control option below and above set value.

Selectable independent, deviation and band alarm.

Sensor supply output (Optional).

RS485 Modbus RTU communication protocol feature (Optional).

CE marked according to European standards.

EI2041

mA

V

ALR

OUT

1. / 4

Read this document carefully before using this device. The guarantee will be expired by damaging of the device if you

don't attend to the directions in the user manual. Also we don't accept any compensations for personal injury, material

damage or capital disadvantages.

up to date: 07.06.2023, modification reserved and can be change any time previous notice !

EI2041-E-07062025

Order Code : EI2041

1

1 - Supply Voltage

UV........90-250V AC

LV........10-30V DC /

8-24V AC

23

4 - Sensor Supply

12....12V DC 50mA

24....24V DC 50mA

3 - Modbus

RS....Modbus

(Specify at order)

2 - Relay Output

2R.......OUT and ALARM

4

Please specify all

features carefully

E-mail : [email protected]

Internet : www.suran-elektronik.de

Tel.: +49 (0)7852 / 4889 962

SURANIndustrieelektronik

An der Hanfrötze 6 / D-77731 Willstätt

Product specificaties