EMOS P5822 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor EMOS P5822 (84 pagina's) in de categorie Energiekosten meter. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/84
1931000020_31-P5822_00_01 95 × 127 mm
www.emos.eu
P5822
GB Digital Power Meter
DE Digitales Energiekostenmessgerät
HU Digitális villamos fogyasztásmérő
SI Digitalni merilnik porabe električne
energije
RS|HR|BA|ME Digitalni mjerač snage
UA Цифровий лічильник споживання
електроенергії
RO|MD Contor digital de consum de energie
electrică
LT Skaitmeninis suvartojamos galios
skaitiklis
LV Digitālais strāvas patēriņa mērītājs
EE Digitaalne võimsusmõõtur
BG Дигитален измервател на мощност
2
GB | Digital Power Meter
Device description
The power consumption metre P5822 (hereinafter referred to as metre) is an electronic
device which measures power consumption and can also calculate and display operating
costs of the measured appliance on agraph. The graph can be set up to display the last
7days/weeks/months. This function allows the user to reduce power costs and decrease
CO2 emissions.
Specications:
Nominal voltage: 230–240 V~/50 Hz
Nominal current: max. 16 A
Max. load: 3 680 W
Operating voltage: 175–276 V~/50 Hz
Period recorded: 0 sto 9 999 days
Operating temperature: 0–50 °C
Measuring range: 2 to 3 680 W
Power consumption range: 0 kWh to
9 999 kWh
Battery: 2× 1.5 V (LR44/AG13)
Use in normal dry conditions with relative humidity ranging from 20 to 90 %
Connection:
First, remove the plastic ring from the battery space at the rear
of the metre, as shown in the picture. The installed batteries
2×1.5V (LR44/AG13) are used to power the metre memory.
Then, connect the metre to a230 V~ power network. Do not
connect any appliance to the metre yet. If the display of the metre
does not show any data or the data is dicult to read, press the „RESET“ button using
asharp pointy object such as apen or apencil. Then, the screen will display all characters
as shown on the gure below. This display will remain for ca 3 seconds.
Display settings:
1. current time setup
1.1 Press and hold the „SET/OK“ button for 3 seconds. You will enter the settings mode
and the clock icon will start blinking.You can change the time values using the buttons
„ENERGY/+“ (increasing values) or „COST/-“ (decreasing values). Pressing the „HISTORY“
button will switch between hours and minutes. Once current time is set, press „SET/OK“.
3
Switching to 12/24 hour mode
After setting the current time, the metre will work on a24 hour time cycle. If you want
to switch to 12 hour mode, simultaneously hold the „HISTORY and „ENERGY/+“ buttons
for 3 seconds. The display will show the AM or PM symbol. AM indicates morning hours,
PM afternoon hours. Set the desired time mode (12/24).
1.2 Total operating time of the connected appliance (TOTAL TIME):
Once the load (input power of the connected appliance) exceeds 2 W, total time will
start recording automatically. You can display the total operating time by pressing the
„COST/-“ button.
1.3 using the „COST/-“ button, the display will show the following, in order:
Total operating time
Total power consumption 0.00–9 999 kWh
Total power costs 0.00–9 999 EUR
Power costs in tari 1 (0.00 EUR/kWh – 9 999 EUR/kWh)
Tari 1 start time


Product specificaties

Merk: EMOS
Categorie: Energiekosten meter
Model: P5822

Heb je hulp nodig?

Als je hulp nodig hebt met EMOS P5822 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden