Emerson ER106001 Handleiding

Emerson Niet gecategoriseerd ER106001

Lees hieronder de 📖 handleiding in het Nederlandse voor Emerson ER106001 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES

ONLY TO THE ORIGINAL PURCHASER AND DOES NOT

EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY

APPLICABLE IMPLIED WARRANTIES, INCLUDING THE

WARRANTY OF MERCHANTABILITY, ARE LIMITED IN

DURATION TO A PERIOD OF THE EXPRESSED WARRANTY

AS PROVIDEDHEREIN BEGINNING WITH THE DATE OF

ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES,

WHETHER EXPRESSED OR IMPLIED, SHALL APPLY TO THE

PRODUCT THEREAFTER. EMERSON MAKES NO WARRANTY

AS TO THE FITNESS OF THE PRODUCT FOR ANY

PARTICULAR PURPOSE OR USE.

THE EXTENT OF EMERSON RADIO CORP’S LIABILITY UNDER

THIS LIMITED WARRANTY IS THE REPAIR OR REPLACEMENT

PROVIDED ABOVE AND, IN NO EVENT, SHALL EMERSON

RADIO CORP’S LIABILITY EXCEED THE PURCHASE PRICE

PAID BY THE PURCHASER OF THE PRODUCT. UNDER NO

CIRCUMSTANCES SHALL EMERSON RADIO CORP.BE LIABLE

FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN

CONNECTION WITH THE USE OF THIS PRODUCT. THIS

WARRANTY IS VALID ONLY IN THE UNITED STATES OF

AMERICA.

Emerson Radio Corp. warrants this product to be free from

manufacturing defects in original material, including original parts,

and workmanship under normal home use and conditions

(“manufacturing defect”) for a period of ninety (90) days from date

of original purchase in, and if used in the United States. Should

service be necessary under this warranty, Emerson will provide

the following at our Return Repair Facility provided the

manufacturing defect is verified along with the date of purchase:

* Repair service for ninety (90) days from date of original

purchase at no charge for labor and parts.

To Receive Authorization to Return a Defective Item, please

contact Emerson Customer Service at 1-800-898-9020. Have

your Model number, Serial Number and dated Proof of Purchase

with you when you call.

NOTE: This warranty does not cover:

(a) Damage to equipment not properly connected to the product.

(b) Cost incurred in the shipping of the product to and from

Emerson’s Return Facility.

abuse, misuse, negligence or failure to follow operating

instructions (including cleaning instructions) provided with

the product.

(d) Ordinary adjustments to the product which can be performed

by customer as outlined in the owner’s manual.

(e) Signal reception problems caused by external antenna or

cable systems.

(f) Products not purchased in the United States.

(g) Damage to product if used outside the United States.

In the event the product must be returned to Emerson:

* Pack the unit in a well-padded heavy corrugated box. Please

insure the item is well padded to avoid damage while in

transit back to our facility. If the item incurs damage, it will

NOT be replaced and the consumer will be responsible for

return freight costs to receive their same unit back.

* Enclose your check or money order payable to Emerson

Radio in the amount of $10 to cover return shipping and

handling costs.

* Enclose a note with your name, address, phone number,

Return Authorization number and brief reason for returning

the unit.

* Enclose a copy of your proof of purchase ( service warranty

will not be provided without dated proof of purchase).

* Ship the unit prepaid via UPS or parcel post (SHIP

INSURED and obtain a tracking number).

LIMITED WARRANTY

2 3 4

6 7 5

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.

HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY

VARY FROM STATE TO STATE. SOME STATES DO NOT

ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR

EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE

THESE RESTRICTIONS MAY NOT APPLY TO YOU.

10-90-1402A

The serial number can be found on the packaging. We suggest

that you record the serial number of your unit in the space below

for future reference.

Model Number: ER106001

Serial Number: _______________________________

Emerson Part No. ER106001-20171016-00 Printed in China

User Guide

1. Introduction

Thank you for choosing the ER106001 Bluetooth stereo earphones. This

manual will help you operate these earphones.

Safety Rules

1. Please follow the guidelines closely in this manual to ensure your safety

before using the earphones.

2. These earphones do not contain any reusable parts so please do not

modify or dismantle these earphones, doing so may void your warranty

and could cause electric shocks / fires.

3. Do not use any abrasive or volatile liquids to clean the earphones.

4. Do not use the earphones in a hazardous location.

2. Package Contents

1 x Bluetooth Earbuds

1 x Micro USB charging cable

1 x User Guide

2 extra pairs multi-size ear buds

1 x carrying sachet

3. Controls and Indicators

1 Light Indicator and Microphone

2 Volume +

3 Multifunction (MF) button

4 Volume -

5 Charge Interface

4.How to use

4.1.General Functions

Press the “MF” button for 2 seconds when the

To turn on device is off. (The blue LED slowly flashes and

a beep sound is heard.)

In power off mode press the “MF” button and

Enter the pairing mode hold on for 4 seconds.(The blue LED and

red LED quickly flash alternately and 2 beep

sounds can be heard.)

In pairing Mode use a Bluetooth enabled mobile

phone or other Bluetooth Device to perform the

pairing action (for details refer to the chapter

about pairing.)

Press “MF” button to play when the device is

paused Press it again to resume playback.

Press + for volume increase.

Press - for volume decrease.

Press and hold - for previous music track.

Press the “MF” button for 4 seconds when the

device is on.( Earbuds will issue a beep sound

and all LEDs are off.)

Press and hold + for next music track.

The red LED flashes.

Plug the micro USB adaptor to the micro USB

port on the Earbuds, then plug the USB

adaptor to a sub socket on a computer or on a

USB charger. When charging, the red LED

light is on.

Press the “MF button for 1 second while the call

is incoming.

Press the “MF” button for 1 second to end call.

Press "+"&"-" at the same time to transfer the

call between the mobile phone & Earbuds

during a call.

Press the “MF” button for 2 seconds to decline

an incoming.

In standby mode, double click the “MF” button

can redial your last dialing number.

In any mode, press and hold "+" and "-" at the

same time, then Earbuds will reset to the factory

setting.

Pairing

Play / pause

Volume up

Volume down

Turn off

Low battery warning

Charging

Answer call

End call

Transfer a Telephone

Call

Decline a call

Last number redial

Factory reset

Bluetooth Feather Light Sweatproof

Secure Fit Earbuds for Sports

ER106001

4.2. Pairing to Bluetooth devices

To use your Bluetooth Stereo earphones, you must firstly pair them with a

Bluetooth enabled device. Once your earphones are paired to a specific

device, they will remain paired when they are within range.

4.3 Pair two devices at the same time.

After pairing the first device, switch off the Bluetooth function on the device.

Then turn on the second device to pair with the earphones after the second

device is successfully paired with earphones, switch back on the Bluetooth

function on the first device. Both devices now connected to the earphones so

you can select music from either device.

Pairing to a Bluetooth device:

Turn on your device and ensure its Bluetooth function is activated.•

• Turn on the Bluetooth Stereo earphones, and go to pairing mode.

• Set your device to search/refresh mode.

• After a few seconds your device will discover the earphones

under ER106001 Select it and your device will confirm this pairing..

You can listen to music and any other sort of entertainment with your

device, enjoying all the audio through the earphones. You can control

your device with the earphone controls i.e. Volume up/down and

previous/next tracks.

RF WARNING S TEMENT:TA

The device has been aluated to meet general RF exposure requirement. The device can be ev

used in portable exposure condition without restriction.

PRODUCT USE AND PROTECTION:

Read and follow all instructions. Use only as intended.

These Bluetooth are intended to be used indoors or outdoors. The earphones have Earbuds

been tested to IPX5 waterproofing standards, which means that they are sweatproof. and water

resistant To prevent fire or shock, do NOT attempt to charge this unit if it is damp.

SAFETY ADVISORY & WARNING:

Read and follow all instructions. Use only as intended.

CAUTION: Do NOT open to repair. qualified technician must carry out repai A r work.

ATTENTION: Do NOT charge while the unit is damp. Towel dry the unit AND make sure all

connections are dry BEFORE plugging in the charging connector. Failure to

do so may result in electrical damage to the unit and ma void the warranty.y

WARNING: This product may contain chemicals listed in Proposition 65 (www.oehha.ca.

gov/prop65/prop65_list/ wlist.html)Ne

WARNING: has a built-in Lithium battery, that must NOT be used in or near an open It

heat source or e essive heat.xc

WARNING: Danger of explosion if battery is incorrectly replaced.

ATTENTION: Do NOT dispose of in a landfill. Contact a certified recycling agent to dispose

of the unit.

4.4. Charging your device

Connect the Earbuds to a USB charger or port. Make sure the Earbuds are

fully charged for at least 3.5 hours before initial use. Insert one end of your

USB cable into the charger or USB port on a PC and the other end to the Micro

USB socket on the Earbuds. While charging, the red LED light is on. When

charging is completed, the Blue LED light will be on.

5. Technical specifications

Bluetooth Specification Bluetooth Version 4.2

Bluetooth Profile HSP,HFP,A2DP,AVRCP

RF Range ≥10m(free space)

Frequency Response 20Hz-22KHz

Speaker rated power 0.3V

Signal-To-Noise ≥95dB

THD+N ≤0.06%

Music time About 4-5 hours from full charge

Talking time About 4-5 hours from full charge

Charging Time About 2 hours

Standby Time Up to 180 hours

Dimension (LxWxH) 100×33×201mm

Weight 13.2g / 0.47 oz

7. Battery Removal/Disposal

Your product contains batteries which cannot be disposed

with normal household waste. Doing so may harm the

environment. Please familiarize yourself about the local

authority rules on the separate collection of batteries because

correct disposal helps to prevent damage to the environment

and health.

CARE, MAINTENANCE, & PRECAUTIONS:

1)If the unit is placed in water, water may enter into the unit and

void your warranty.

2)Do NOT use or store the unit in places with high temperature.

3)AVOID prolonged exposure to ultraviolet radiation (UV sunlight)

and strong magnetic fields.

4)Periodically clean the rubber earbuds with a soft moist cloth and

ensure no objects such as dirt, hair, or sand are on the rubber

earbuds. Do NOT use any oily solvent or chemicals for cleaning.

5)Power and / or charge the built-in rechargeable battery for

portable use by connecting the USB cord to a computer USB

connection or to an AC outlet using the AC-to-USB cord 5V, 1A

p er adapter intended for use with the unit.ow

6)Noise and audio distortion may occu when the batteries are r

nearing end of charge.

7)Do NOT remove the built-in battery.

SAFETY:

This product has a limited life span of use and should be

replaced when it shows obvious signs of wear. Do not modify or

remove any original component parts of the earphones.

Please exercise care and good judgment when using these

Earbuds. Always ensure that you can hear and be aware of any

potential hazards around you.

You should always

1)Properly clean the Earbuds prior to storage.

You should never

1)Never charge the Earbuds if you suspect water has entered the

device. Charging a device with wate inside could be potentially r

hazardous and cause fire or a spark.

2)Never use the Earbuds in a wet environment.

3)Never attempt to fix these Earbuds.

Wireless Earbuds

6 C S TEMENT:. FC TA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including interference that may cause

undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

Pairing to a computer:

If there is no Bluetooth function supported by your computer, a Bluetooth •

adapter will be required. Connect the adapter to your computer and ensure

its Bluetooth function is activated.

• Turn on the device, go to the pairing mode.

• Open the Bluetooth software installed on your computer, and select the

“Search your Bluetooth devices” function. Refer to your user manual of the

Bluetooth software for more information.

• After a few seconds the ER106001 will list in Bluetooth software of your

computer as a discoverable device. Select this icon and click right button

of mouse to select “pairing”, then select “connect with audio device” with

the right button on the mouse.

device, pursuant to Part 15 of the FCC Rules. These limits are designed to p vide reasonable ro

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. H ever, there is no ow

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference t r r o adio o tel vision tion,e recep twhich can be de ermined turning the by

equipment off and on, the user is encouraged to try to correct the int fer c by r r of er en e one o mo e

the following measures: reorient or relocate the receiving antenna, increase the separation

between the equipment and receiver, connect the equipment into an outlet on a circuit different

from that to which the receiver is connected, consult the dealer or an experienced radio/TV

technician for help.

ER106001

Product specificaties

Merk:	Emerson
Categorie:	Niet gecategoriseerd
Model:	ER106001

Heb je hulp nodig?

Als je hulp nodig hebt met Emerson ER106001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Emerson

Emerson WBS12 Handleiding

12 Maart 2024

Emerson CR175B Handleiding

14 November 2023

Emerson FK609 Handleiding

14 November 2023

Emerson PD5802 Handleiding

14 November 2023

Emerson CKS3526 Handleiding

14 November 2023

Emerson ER-X300 Handleiding

14 November 2023

Emerson DTE110 Handleiding

14 November 2023

Emerson CR281P Handleiding

14 November 2023

Emerson CR440BE Handleiding

14 November 2023

Emerson CKD9902 Handleiding

14 November 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024