Elro FCO240011 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Elro FCO240011 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Manual FCO240011 version: 2
FCO240011
CO2 MONITOR
MEASURE AIR QUALITY - TEMPERATURE HUMIDITY –
English Instruction manual Page 3 0
Deutsch Anleitungshandbuch Seite 7 0
Nederlands Gebruiksaanwijzing Pagina 11
Français Mode d’emploi Page 15
Español Instrucciones de uso Página 19
Italiano Instruzioni per l'uso Pagina 23
- - 2
- - 3
1. Introduction
Thank you for the purchase of this Carbon Dioxide Monitor, Carbon Dioxide is also known as . This product is CO2
designed for measuring CO concentrations, as well as air temperature and humidity. To be used at home, office, 2
school, canteen etc. The monitor adapts itself to its environment (auto calibrate). No settings need to be made. CO2
This Monitor alerts users through voice messages and audible alarms. Always avoid exposure to high CO2
concentrations of . This product, when used properly, is designed to alert you to elevated levels to so that you CO2CO2
may take action to remove yourself from that environment.
• Accurate measurement of:
- carbon dioxide detection, ± 50ppm+5%
- temperature detection, ± 0.5°C or 0.9°F
- moisture detection, ± 5% RH
• Led status indication
• Voice alarm notification
• AUTO adjustment brightness of the display
• Rechargeable internal backup battery (± 12 hours)
2 Explanation . (see pa
(see pa
(see pa
(see pa(see page 2)
ge 2)
ge 2)
ge 2) ge 2)
Number
Function
Number
Function
1
Voice Siren output /
7
SET/AUTO operation button
2
Green / Yellow / Red status indicator
8
TEST / HUSH operation button
3
Temperature indicator
9
Adapter connection
4
Humidity indicator
10
ON / OFF Switch back-up battery
5
CO2 indicator
11
Remove from mounting plate
6
Display
12
Attach to mounting plate
3 Where to install the device? .
The sensor needs a process that ADAPTS to the current environment. In order to achieve a more accurate detection CO2
effect, it should continue to work for more than 24 hours after changing the use environment to complete the
automatic calibration. After the completion, the calibration will not be completed at the next startup.
Ideally, a device should be installed in every room containing a fuel-burning appliance and in a room where the
occupant(s) spend most time like the living room, bedroom and study or hobby room. The monitor can be wall CO2
mounted (eye level), use cable input A or placed on a cabinet or table/desk, use cable input B . ( page 2)see ( page 2)see
4. Where to install the device not
In an enclosed space (for example in a cupboard or behind a curtain).
Where it can be obstructed (for example by furniture).
Directly above a sink.
Next to a door or window.
Next to an extractor fan.
Next to an air vent or other similar ventilation openings.
In an area where the temperature may drop below -5°C or exceed . 50°C
Where dirt and dust may block the sensor.
In a damp or humid location.
In the immediate vicinity of a cooking appliance.
5 Mounting . (see page 2)
The Monitor comes with screws and wall plugs for mounting on the wall. CO2
Remove the Monitor from the mounting plate, turn (11) counterclockwise approximate . CO215°
Use the mounting plate to mark the drill holes.
After drilling, place the dowels in the holes and then screw down the mounting plate with the screws.
Switch on the back-up battery (10), fully charged approximate 12 hours usage without adapter connection. is
Connect the adapter to the monitor (9) and a power outlet. CO2
Place the Monitor on the mounting plate and turn (12) approximate clockwise. CO215°


Product specificaties

Merk: Elro
Categorie: Niet gecategoriseerd
Model: FCO240011

Heb je hulp nodig?

Als je hulp nodig hebt met Elro FCO240011 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Elro

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd