Elite Screens VMAX2 VMAX128UWX2 Handleiding

Elite Screens Projectiescherm VMAX2 VMAX128UWX2

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens VMAX2 VMAX128UWX2 (5 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

Rev. 05 1 1117 DR www.elitescreens.com

Electric Motorized Projection Screen

VMAX 2 Series

User’s Guide

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedure below.

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black

Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved

changes or modifications (except for cutting the power cord for hardwire installations) to this unit are

prohibited and will void your warranty. For more information, please contact our Technical Support

- Department at (877) 511 1211 Ext. 604.

• Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not

recommended by the manufacturer.

• Handle the unit carefully during transportation to avoid any damages.

• To ensure safe and reliable operation, direct connection to a properly grounded power

source is advised.

• The power outlet supplying power to the unit should be close to the unit and easily

accessible.

• Do not install the unit on uneven or inclined surfaces.

• Do not put heavy objects on the power cord and position it properly to avoid creating a

trip obstacle.

• Never overload the power cord to prevent an electric shock or fire due to a loose

contact or a short circuit.

• There are not user serviceable parts in this unit. Do not attempt to disassemble this unit

by yourself. No one except authorized technicians can open and make repairs to this

unit.

• Make sure the power source this unit is connected to has a continuous power flow.

• If there is need to use an extension cord, make sure the cord has an equal rating as the

appliance to avoid overheat.

• Do not handle the power plug when your hands are wet or your feet are in contact with

water.

Rev. 05 2 1117 DR www.elitescreens.com

Do not use this unit under the following circumstances.

• Disconnect the power cord under the conditions of heavy rain, wind, thunder or

lightning.

• Avoid direct Sunshine, rain shower and moisture.

• Keep away from fire sources and high temperature to prevent this device from

overheating.

• Cut off the power supply first before transportation or maintenance.

• Fully disconnect from the power supply when the unit is not in use for a long period of

time, as should be done with any other electric household appliance.

• To avoid possible injury and/or an electric shock, do not attempt to use the screen if

there is obvious damage or if there are any evident broken parts.

Installation Warning

Due to various installation environments, the instructions provided n this user’s guide are for i

reference only. Please consult a professional installation company for further installation and

safety advice. The installer must insure that proper mounting hardware is used to provide

adequate strength suitable for the installation. Elite Screens is not liable for any faulty

installations.

The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top

black drop in the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modifications to this product are prohibited and will void the warranty with the

manufacturer. Please contact Elite Screens Customer Service for any questions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that the interference will not occur on a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures.

 Reorient or relocate the receiving antenna of the device which may be casing the

interference.

 Increase the separation between the screen and the device’s receiver.

 Connect the equipment into a different power outlet other than the device.

Rev. 05 3 1117 DR www.elitescreens.com

Pre- Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact

with foreign particles such as dust, sawdust, and/or liquids.

NOTE:

Regardless of the mounting method, the screen should be securely supported so that the

vibration or pulling on the viewing surface will not cause the casing to become loose or fall. The

installer must insure that the fasteners used are of adequate strength and suitable for the

installation location.

Accessories for VMAX 2 Series

Please make sure all accessories below are included before proceeding.

Red+ Green-

A. B. C. D.

Infrared Remote Radio Frequency 12 Volt Trigger 3 Way Wall Switch

D. E. F.

Infrared Eye Receiver AAA Batteries Bubble Level

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	VMAX2 VMAX128UWX2
Kleur van het product:	Wit
Gewicht:	- g
Oorspronkelijke beeldverhouding:	16:10
Kleur behuizing:	Zwart
Zichtbare schermhoogte (h):	1723 mm
Zichtbare schermbreedte (b):	2859 mm
Diagonaal:	128 "
Totale grootte van het scherm (hoogte x breedte):	- cm
Schermgain:	1.1