Electro Harmonix Satisfaction Handleiding

Bekijk gratis de handleiding van Electro Harmonix Satisfaction (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 65 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over Electro Harmonix Satisfaction of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

SATISFACTION

VINTAGE FUZZ

Congratulations on your purchase of the Satisfaction Fuzz, modern recreation a

of the classic fuzz sounds of the 1960s. Updated with a compact nano chassis,

the Satisfaction creates drive sounds ranging from crunchy breakup to intense

fuzz. Attack and Volume controls put you in the mix, and true-bypass switching

keeps your bypassed signal intact

- CONTROLS –

ATTACK Knob – Controls the amount of input gain and distortionAs you turn .

this knob clockwise, the SATISFACTION ranges from mild drive to saturated fuzz.

VOL Knob Sets the output level of the SATISFACTION. –

FOOTSWITCH and LED –The Footswitch selects whether the SATISFACTION

is engaged or in true bypass mode. When the effect is engaged, the LED lit. is

INPUT Jack SATISFACTION. The input –This ¼” jack is the audio input for the

impedance is 50k. 

AMP Jack SATISFACTION. The –This ¼” jack is the audio output from the

output impedance depends on the VOLUME setting, ranging from to k. 10025 

9V Power Jack The SATISFACTION can run off of a 9V battery or you can –

use an optional 9VDC AC Adapter capable of delivering at least mA to the 9V 25

power jack. We recommend the . AC Adapter must have a EHX9.6DC-200 The

center negative plug. The battery may be left in or taken out when using an AC

Adapter. The SATISFACTION draws 1.5mA at 9VDC. The maximum voltage

that may be connected to the 9V Power Jack is 10VDC.

- CHANGING THE BATTERY -

To change the battery, remove the four screws on the bottom of the

SATISFACTION and take off the bottom plate. The battery clip is in the bottom of

the unit. Take care not to touch the circuit board while changing the battery in

order to avoid damaging a component.

Product specificaties