Electro Harmonix Hot Wax Handleiding

Bekijk gratis de handleiding van Electro Harmonix Hot Wax (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over Electro Harmonix Hot Wax of wil je andere gebruikers van dit product iets vragen? Stel een vraag

HOT WAX

Dual Overdrive

Congratulations on your purchase of the Electro-Harmonix Hot WaxThe Hot .

Wax is a unique dual overdrive pedal that combines the distortion sections

used by two EHX classics: the and the Each section can CrayonHot Tubes.

be engaged independently, for two very different overdrive flavors, or

together to create a massive overdriven sound. The Hot Wax is a flexible and

great-sounding distortion unit useful for guitar, bass, keyboards, and many

other musical instruments.

The Hot Wax includes a two-knob EQ ( and for extensive BASS TREBLE)

tonal control, and control to mix between your dry and distorted a BLEND

sound. These three controls are active with either or both distortion sections

engaged, and bypassed when both overdrive section are turned offThe Hot .

Wax features buffered bypass and is powered a standard 9V power jack. by

WARNING: Your Hot Wax comes equipped with an Electro-Harmonix 9.6DC-200BI power

supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The Hot Wax requires 75mA

at 9VDC with a center negative plug. Use of the wrong adapter or a plug with the wrong

polarity may damage your Hot Wax and void the warranty.

- USING THE HOT WAX-

Plug the included power adapter into the 9V jack. The pedal must be

powered to pass a signal throughregardless of whether or not distortion is ,

engaged. Step on the footswitch to engage the Crayon sectionCRAYON .

The green D lights to indicate that the Crayon is on. Click the LEHOT TUBES

footswitch to turn on the Hot Tubes section, as indicated by the red LED.

The EQ and controls are active when either one or BASS & TREBLE BLEND

both sections are in use. When only one section is active, adjust that

section’s VOL (volu) knob to set the master volume. When both sections me

are active:

The Crayon comes first in the signal path .

TVOL knob sets the level driving the Hot Tubes section. he Crayon’s

The EQ affects the signal

after

. the Hot Tubes’ distortion section

The BLEND knob combines the clean signal with the post-EQ signal.

T VOL knob functions as the master volume. he Hot Tubes’

- CONTROLS and I/O JACKS -

Footswitches and LEDs

The right LED (green) illuminates when the Crayon section is engaged via

the footswitch. The left (red) LED lights when using the Hot Tubes section.

VOL Knob (Crayon)

If only the Crayon is active, theknob sets master output level. If both VOL

sections are active, the VOL knob sets the level between the Crayon’s drive

section and the Hot Tubes’ drive section.

VOL Knob (Hot Tubes)

Use the Hot Tubes knob to set the master output level. VOL

DRIVE Knobs

Turn the appropriateknob to set the distortion intensity. DRIVE

BASS and TREBLE Equalization Knobs

Adjust the knob to boost or cut low frequencies. Adjust the BASS TREBLE

knob to boost or cut high frequencies. The frequency response for either

knob is flat (no boost or cut) when the knob is set halfway up.

BLEND Knob

The knob mixes the dry and distorted signal. With BLEND set to BLEND

minimum (fully counterclockwise), you will only hear the dry signal. When

BLEND is turned fully clockwise, you will only hear the distort signal. All ed

other settings will yield varying mixtures of dry and distorted sounds.

Turning BLEND down to add dry signal can add more punch and clarity,

along with more emphasis on pick attackThis functionality may be of .

particular importan to bassists, as full-on distortion can reduce punch and ce

muddy up low end frequencies.

INPUT Jack

Plug your instrument or the output of another effects pedal into the ¼”

INPUT jack. The input impedance is 2.2M. 

OUTPUT Jack

Use the jack to send the signal to an amp or another effects ¼” OUTPUT

pedal. The signal will be dry or effected based on the bypass status. The

output impedance is 220. 

Product specificaties