Electro Harmonix Cock Fight Handleiding

Bekijk gratis de handleiding van Electro Harmonix Cock Fight (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 57 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over Electro Harmonix Cock Fight of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

Cock Fight

Cocked Talking Wah with Fuzz

Congratulations on your purchase of the Electro-Harmonix , a dual-Cock Fight

filter fuzz box. The contains two different expressive filters: a Cock Fight

traditional wah pedal filter CRY, and a formant filter TALK used for vowel sounds.

The also has a fuzz section that can be added before or after the Cock Fight

filter section, or taken out of the signal path. The BOTTOM and BIAS controls

allow additional tone shaping possibilities. Connect an expression pedal or a

control voltage to the expression input jack for even more sound control.

WARNING: Your Cock Fight comes equipped with an Electro-Harmonix 9.6DC-200BI

power supply (same as used by Boss

®

& Ibanez

®

: 9.6 Volts DC 200mA). The Cock Fight

requires mA at 9VDC with a center negative plug. Using the wrong adapter or a plug 40

with the wrong polarity may damage your Cock Fight and void the warranty.

-QUICK SETUP-

Connect the output plug of the supplied power adapter to the 9V power jack.

Plug your instrument in the INPUT jack; connect your amp to the OUTPUT jack.

Set VOL to about three o’clock, FREQ to max, BOTTOM to min, left switch to

CRY, and right switch to FUZZ OFF. Press the footswitch so that the LED light is

lit. With the effect turned on, you will hear a slight boost in volume as well as a

brighter sound. Adjust the FREQ knob to dial in the cocked wah sound to your

taste. Connect an optional expression pedal to vary the frequency of the filter

continuously as you would with a traditional wah pedal.

- CONTROLS -

VOL Knob– Use this knob to adjust the master output volume.

FREQ Knob– Use toadjust the frequency of the filter selected by the CRY/TALK

toggle switch.

TONE Knob– Use to blend between a darker fuzz and brighter fuzz sound.

DRIVE Knob–Adjust to set the amount of fuzz.

BOTTOM Knob–BOTTOM is a low frequency boost control that is slightly

above unity gain when set fully clockwise. Set fully counterclockwise to remove

the BOTTOM circuit from the signal path. TIP: When used with a bass guitar or

other low frequency sources, the BOTTOM adjustment can help retain the

bottom end typically lost with most wah pedals.

Product specificaties