Eizo FDS1702NT Handleiding

Eizo Monitor FDS1702NT

Lees hieronder de 📖 handleiding in het Nederlandse voor Eizo FDS1702NT (56 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56

Important

Please read this User’s Manual and Setup Manual (separate volume)

carefully to familiarize yourself with safe and effective usage.

• Please refer to the Setup Manual for basic information ranging from

connection of the monitor to a PC to using the monitor.

• Please refer to the NetDA Manager User’s Manual for information on

network connection settings and operations.

• Please refer to the Touch Panel Driver User’s Manual for touch panel

settings and operations (for FDS1702NT only).

• The latest User’s Manual is available for download from our web site:

http://www.eizoglobal.com

2

This product has been adjusted specically for use in the region to which it was originally shipped. If operated

outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior

arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been

made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are

subject to change without notice.

Noticeforthismonitor

Notice for this monitor

Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to

the dedicated usages such as operation of terminal equipment.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the

monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on

the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact

your local EIZO representative.

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

(Cautions for the Use of the Touch Panel)

• During touch operation

Be careful of the following points. Otherwise, damage may occur to the monitor.

- Do not strongly press, scratch, or poke the panel.

- Do not touch the panel with hard objects such as ballpoint pens or metals.

Product specificaties

Merk:	Eizo
Categorie:	Monitor
Model:	FDS1702NT
Kleur van het product:	Zwart
Beeldschermdiagonaal:	17 "
Resolutie:	1280 x 1024 Pixels
Touchscreen:	Ja
Kijkhoek, horizontaal:	170 °
Kijkhoek, verticaal:	160 °
Beeldscherm vorm:	Flat
Typische contrastverhouding:	1000:1
Helderheid:	190 cd/m²
Frequentiebereik horizontaal:	24.8 - 80 kHz
Frequentiebereik verticaal:	24.8 - 80 Hz
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	0.5 W
Stroomverbruik (in standby):	0.5 W
Vermogensverbruik (max):	41 W
Aantal luidsprekers:	2
Hoofdtelefoonuitgangen:	1
Certificering:	CE, WEEE, cTUVus, CB, FCC-A, Canadian ICES-003-A, RSS, VCCI-A
Beeldscherm, aantal kleuren:	16.78 miljoen kleuren
Volledige HD:	Nee
Ingebouwde microfoon:	Nee
3D:	Nee
Audio-ingangen:	1
Display technologie:	LCD
Responstijd:	5 ms
VESA-montage:	Ja
Paneelmontage-interface:	100 x 100 mm
Duurzaamheidscertificaten:	RoHS
Helderheid (typisch):	190 cd/m²
Beeldverhouding:	5:4
Apparte H/V sync:	Ja
Effectieve beelddiameter:	337.92 x 270.336 mm
Ingebouwde camera:	Nee
Diepte ( zonder voet ):	65.3 mm
Hoogte (zonder voet ):	304 mm
Breedte ( zonder voet ):	367 mm
Gewicht (zonder voet):	4300 g
On Screen Display (OSD)-talen:	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
Breedte apparaat (met standaard):	367 mm
Diepte apparaat (met standaard):	157 mm
Hoogte apparaat (met standaard):	360 mm
Gewicht (met standaard):	6700 g
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Aantal On Screen Display-talen:	9
Aantal USB Type-A downstream-poorten:	2
Stroomverbruik (PowerSave):	8 W
Grootte beeld (diagonaal):	432 mm
sRGB:	Ja
Ophangsysteem voor aan de muur:	Ja
Touchscreen technologie:	Resistief
Hardheid oppervlak:	2H
HD-Ready:	Ja
Afmetingen (B x D x H) met voet:	367 x 157 x 360 mm
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 90 procent
Bereik kantelhoek:	0 - 30 °
kantel aanpassingen:	Ja