Marshall V-R171P-AFHD Handleiding
Pagina's 4 Monitor
Bekijk de handleiding van Marshall V-R171P-AFHD gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
www.LCDRacks.com
Email: [email protected]
Marshall Electronics warranties to the first consumer, that this V-R171P-AFHD inch LCD rack mounted monitor will, under normal use, be
free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no
proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifica-
tions in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any
warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the
time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of
the display active viewing area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to
effective use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.
Product Overview
Features
Electrical Specifications
Mechanical Specifications
Operational Setup
Optional Accessories
Connectors
Switch Settings, Adjustments and Indicators
Advanced Menu Functions
Warranty
1
2
3
4
5
6
7
8
10
Warranty
7
Adjusting to SMPTE or split field color bars.
1. Allow monitor to warm up for 5-10 minutes minimum. Adjustments will not be accurate on a cold monitor.
2. Display SMPTE color bars on monitor. Turn on Mono
3. Find the PLUGE (superblack, black, and gray bars) at the lower right of the pattern. Adjust BRIGHTNESS control until there is no
difference visible between the superblack and black bars, but a difference is visible between the black and gray bars.
4. Adjust CONTRAST control to achieve a balanced gray scale across top bars.
5.Turn off Mono then turn on BLUE GUN
6. Turn up CHROMA (color level) control until the two outermost bars (white and blue appear to match in brightness.
7. NTSC Only - Adjust COLOR PHASE (tint or hue) control until the third bar from the left (cyan) and the third bar from the right
(magenta) appear to match in brightness.
V
V
V
V-R171P-AFHD
-R171P-AFHD
-R171P-AFHD
-R171P-AFHD V-R171P-AFHD
Users
Users
Users
Users Guide
Guide
Guide
GuideUsers Guide
9
-16:9 Marker Frame Aspect Markers appear as RED lines that are used to frame the image for
an additional screen format when 16:9 display is enabled. For example 4:3 marker is often used
for HD broadcasts that are also down converted and cropped for SD transmission.
Frame markers are available for 4:3, 15:9, 14:9, 13:9, 1.85:1, 2.35:1 and 2.37:1 screen aspects.
-Safe Area Primarily used with Character Generator or CGI to identify the area of the screen
that will not be blanked by the overscan of consumer TV sets. Select between choices of 93%,
90%, 88%, or 80% of the active picture area. Please note that the screen of the V-R171P-AFHD
has been factory adjusted to display 100% of the active picture.
Display Scale Menu - Scaling is the process whereby the image is enlarged or reduced to fi t on
the screen.
As the native LCD displays of the V-R171P-AFHD are 1280 pixels wide by 768 pixels high, it is
often necessary to change the size of the image to fill the whole screen.
Pixel to Pixel mode bypasses the enlargement/shrink of this scaling function and displays the
native incoming format. Zoom and Underscan are disabled.
For 525-NTSC/480P based images, pixel to pixel will appear as a 640 pixels wide by 576 pixels
high (4:3 aspect) or 720 pixels wide by 480 pixels high (16:9 aspect).
For 625-PAL/576P based images, pixel to pixel will appear as a 640 pixels wide by 576 pixels
high (4:3 aspect) or 720 pixels wide by 576 pixels high (16:9 aspect).
For 720 line HD based images, pixel to pixel will appear as a 1280 pixels wide by 720 pixels
high (16:9 aspect) with displaying native resolution.
For 1080 line HD based images, pixel to pixel will appear as cropped 1280 pixels wide by 768
pixels high (15:9 aspect) starting from the center of the image
Zoom Area
will program the zoom enlargement value, 64%, 36%, 16% that will be enabled with the ZOOM button.
Underscan (Not Available for HD and PC Signals)
Displays scaled images without vertical and horizontal blanking applied. This function can only be used with Standard defi nition signals.
SDI signals will display all data input with ancillary data appearing to the right of the image.
OSD On/Off
Activates continuous On Screen Display for status and input format.
10
Last updated: 06/19/2006
• Native display for 720P, and 480i images
• TFT-MegaPixel™totally digital end to end signal processing
• 23ms pixel response measured worst case black to white to black
• 180 degree viewing angle in all directions
• Multiple format acceptance for virtually any analog or digital video signal
• Display PC Signals to XGA 1024x768
• Frame Marker Screen Overlay with curser and safe area
• ColorMatch Conversion™ with SMPTE/EBU color space emulation of CRT
• 98% SMPTE/EBU Color Gamut
• Color temperature presets for D75, D65, D55
• HyperProcess™ motion interpolation of interlace images
• On screen display of input status, formats, and menu functions
• Pixel to Pixel™ native resolution display
• Lightweight – 75% lighter than CRT models
• Settings memory restores active state with power off/on cycle
• Direct front panel selection of all functions
• Blue Gun for adjustment to SMPTE color bars
• Includes V-PS12-5V1 Universal power supply (U.L. class 2)
• Three LEDs (Red, Green, Amber) produce 7 different tally indications
Occupying only 6 SRU and weighing just 12 pounds, the V-R171P-AFHD features our Completely Digital TFT-Megapixel™ system
and can display high defi nition images on the LCD/TFT screen with 2.95 million pixels. Analog signals are digitized using an ad-
vanced 10 bit process with over sampling and adaptive 5 line comb fi lter. Images are scaled to fit on screen in the highest resolution
using a state of the art LSI that incorporates adaptive pixel interpolation and precision Gamma correction. Additional features in-
clude, Pixel-to-Pixel™ native resolution scaling, Color Temperature adjustment, Motion Compensation, setup memory, Frame Marker
Overlays, Blue Gun, and direct access for all adjustment and selection functions The V-R171P-AFHD has been designed for field and
studio applications with a rugged, all metal enclosure.
1
Product Overview
2
Features
2
6
V
V
V
V-R
-R
-R
-R171P
171P
171P
171P-AFH
-AFH
-AFH
-AFHD
D
D
D User
User
User
Users
s
s
s Guid
Guid
Guid
Guide
e
e
e
V-R171P-AFHD Users Guide
Marshall Electronics
Superb Imaging
• Native HD-720P, 1280 H x 768V wide screen (2.95 million total RGB pixels)
• 16.7 Million Colors
• CRT style viewing angle - 180° in any direction.
• Bright 450 candelas per square meter (cd/m
2
) luminance
• Ultra high 500:1 contrast ratio with response rates less than 23 milliseconds
• All video formats are scaled to fi t on screen in the highest resolution using a state of the art LSI with proprietary embedded program
ming that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the best images available.
• Calibrated to SMPTE specifi cations for Color Temperature and Gamma
Display Multiple Screen Formats and Frame Rates
• 525 –60i / 625 - 50i - SDI & Analog Composite, Component, Y/C Interlaced with automatic NTSC/PAL system detection
• 720 x 486P -Analog Component Progressive
• 720 x 576P -Analog Component Progressive
• 720 x 1280 - 23.973P, 24P, 25P, 29.97P, 30P, 59.94P, 60P Analog Component and HDSDI Progressive
• 1035 x 1920 - 59.94i, 60i Analog Component and HDSDI Interlaced
• 1080 x 1920 – 50i, 59.94i, 60i / 23.973Psf, 24Psf, 25Psf, 29.97Psf, 30Psf in Analog Component and HDSDI signal formats
Signal Input Flexibility
• HDSDI (SMPTE292M/294M/296M) With reclocked and shaped output
• SDI (SMPTE259M) (ITR-U601) With reclocked and shaped output
• Component Analog High Definition YPrPb (SMPTE274M,/295M,/296M)
• Component Analog Standard Defi nition (SMPTE/EBU N-10))
• Composite PAL/NTSC (ITU-R BT.470/SMPTE170A) with active loop out
• Y/C (S-Video) with active loop out
• Computer VGA to WXGA
• All analog signals have AGC
• Analog signals are digitized using an advanced 10 bit process on each signal path with 4x over sampling and adaptive 5 line comb
fi lter with exacting color space conversion.
On Screen Frame Markers in 16:9 Mode
• Center Frame Mark (Black plus White Super Imposed)
• Active Area Marker (Black plus White Super Imposed)
• 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 (Red Plus Black marks)
Monochrome Mode
• Luma only checks for lighting, Bright and Contrast adjustment, etc.
Blue Gun
• Adjust color settings to SMPTE color bars
Zoom Function
• Use for screen center camera focus. 4 Zoom modes are available
Pixel to Pixel Mode
• Bypass of screen scaling functions with exact mapping of input pixels to the display. Maximum of 1280 x 768 pixels mapped.
Use to select one of three possible interpolation methods for Interlace im-MOTION CONTROL
ages. Interlace Images must be converted to Progressive for display on the LCD screen.
This function is not available for Progressive images.
-Line 2x will perform an intra-fi eld interpolation by line doubling.
-1+1 will perform an inter-fi eld interpolation assembling field 1 and fi eld 2 into a single progres-
sive frame.
-1+0 will perform interpolation based upon adjacent fi eld pixel information
Five user defi ned set-ups may be stored
Use the to store user memory 1-5Save as Setting
USE to recall user memory 1-5Load Setting
Set the functions enabled for the MARK Toggle On/Off button with the Display Graphics menu.
-Center Cursor will place a cross hair cursor on the middle of the screen. The lines of the cross
hair consist of a center white element that is 4 pixels wide, surrounded by a black border on
each side that is 2 pixels wide. Use of black and white for the Center Cursor function allows the
viewer to see screen center in all ranges of color for the screen image.
Display Graphics Menu
9
Advanced Menu Functions
Main Menu – Use to maneuver. Activate the desired function by pressing UP/DOWNSELECT.
Functions in RED are not accessible based upon source selection or feature conflicts.
The example to the left has motion control RED or disabled due to selection of a Progressive Video or VGA source.
Color Temperature - Move cursor to this function then press select.
(Control indication will show as arrows)
Use UP/DOWN to cycle through presets of D55, D65, D75, or USER
SELECT the desired function to set.
Exit by pressing MENU.
When color temperature is selected, the color balance USERRGB Gain and Offset
adjustments will be enabled.
Use to access the desired adjustment parameter.UP/DOWN/SELECT
Left Line= Increase of Gain
Center Line = D65 (Default)
Right Line = Decrease of Gain
Right Line= Increase of Bias
Center Line = D65 (Default)
Left Line = Decrease of Bias
TABLE-4 / Analog Composite Input BNC Connector Signals
TABLE-2 / YPbPr/RGB Analog Component and Composite Video Systems Supported by the V-R171P-AFHD
Computer Display Systems Supported by the V-R171P-AFHD
TABLE-3 / HDSDI/SDI Input BNC Connector Signals
SignalFrames per SecondAspectActive LinesScanning MethodData Rate
525-60i30/29.974:3/16:9483Interlaced270Mb/s
625-50i254:3/16:9576Interlaced270Mb/s
1280x720P60/59.94/30/29.97/24/23.9716:9720Progressive1.5Gb/s
1920x103530/29.974:3/16:91035Interlaced1.5Gb/s
1920x108030/29.97/254:3/16:91080Interlaced1.5Gb/s
1920x108030/29.97/25/24/23.974:3/16:91080Progressive1.5Gb/s
Standard Resolution (Frequency)
SVGA800 x 600 (60 , 75 ,85 Hz)
XGA1024 x 768 (60 ,75 ,85 Hz)
SXGA1280 x 960 (60 Hz)
SignalFrames per SecondAspectActive LinesScanning Method
525-60i30/29.974:3/16:9/15:9483Interlaced
625-50i254:3/16:9/15:9576Interlaced
480P(720x480)50/60/59.9415:9/16:9480Progressive
1280x720P60/59.94/5015:9/16:9720Progressive
1920x103530/29.974:3/16:9/15:91035Interlaced
1920x108030/29.97/254:3/16:9/15:91080Interlaced
1920x108030/29.97/25/24/23.974:3/16:9/15:91080Progressive
SignalFrames per SecondAspectActive LinesScanning Method
525-60i30/29.974:3/16:9483Interlaced
625-50i254:3/16:9576Interlaced
Signal TypeHD Analog color
difference YPbPr
SD Analog color difference
Y, R-Y, B-Y
HD or SD Analog RGB
(Sync on Green)
VGA to UXGA
Pin1PrR-YRedRed
Pin 2YYGreen Green
Pin3PbB-YBlueBlue
Pin4
Pin5
Pin6GroundGroundGroundGround
Pin7GroundGroundGroundGround
Pin8GroundGroundGroundGround
Pin9
Pin10
Pin11
Pin12
Pin13 H Sync
Pin14 V Sync
Pin15
TABLE-1
Analog Component High Defi nition Video, Standard Definition Video
or Computer VGA to UGA Connector - Pin Assignment In and Out
4
5
Marshall Electronics
V
V
V
V-R
-R
-R
-R171P
171P
171P
171P-AFHD
-AFHD
-AFHD
-AFHD
Use
Use
Use
Users
rs
rs
rs Gu
Gu
Gu
Guide
ide
ide
ideV-R171P-AFHD Users Guide
Battery Adapter
V-DV-PWR1
Uses 2 Sony DVCam/HDV FP-Type batteries.
When used with monitor power supply, can
charge batteries plus operate monitor
V-mount to Anton Bauer
adapter
V-ABA-01
Use to power Marshall Electronics monitors
that have V-Mount plate with Anton Bauer Gold
Mount battery.
Sequential 2 channel
charger
IDX-VL-2Plus
2-channel sequential charger with a built-in 60W
power supply. Charges 2 ENDURA E series bat-
teries in fewer than 5 hours. One 10’ XLR cable
included. Weighs only 2 lbs
Sequential 4 channel
charger
IDX-VL-4
Economically charges 4 ENDURA E series bat-
teries in under 6 hours using Full Power Charge
(FPC) method
Simultaneous 4 channel
charger
IDX-VL-4S
Charges 4 ENDURA E series batteries in 2.5
hours or less
55 W Lithium BatteryIDX-E7SV-Mount battery pack with 3 LED power Indicator
55 W Lithium Battery
with Power Link
IDX-E7
V-Mount Battery Pack with PowerLink includes
accurate Power Status Display and supports
Digi-View
82 W Lithium BatteryIDX-E10SV-Mount battery pack with 3 LED power Indicator
82 W Lithium Battery
with Power Link
IDX-E10
V-Mount Battery Pack with PowerLink includes
accurate Power Status Display and supports
Digi-View
Digital to Analog
Converter
BC-0301-10Converts SDI to analog Composite
Mounting PlateVP-LCD70-TMB-02
Attaches to any side for mount to ¼-20 threaded
component
Cleaning WipesV-HWP-K
Package of 10 non-toxic, antistatic, alcohol and
ammonia free cleaning wipes.
Sun HoodV-H900Use for viewing in bright lighting or outdoors
Power Adapter CableV-PAC-DUse with Anton Bauer D-type connection
Power Adapter CableV-PAC-XLR Use with 4 Pin XLR connections
6
Optional Accessories
Product specificaties
| Merk: | Marshall |
| Categorie: | Monitor |
| Model: | V-R171P-AFHD |
Heb je hulp nodig?
Als je hulp nodig hebt met Marshall V-R171P-AFHD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden