Einhell TH-TS 1221 Handleiding
Einhell
Zaagmachine
TH-TS 1221
Bekijk gratis de handleiding van Einhell TH-TS 1221 (6 pagina’s), behorend tot de categorie Zaagmachine. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.6 sterren uit 3.5 reviews. Heb je een vraag over Einhell TH-TS 1221 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
7
GB
Table of contents
1. Safety information
2. Layout
3. Items supplied
4. Intended use
5. Technical data
6. Before starting the equipment
7. Assembly
8. Using the equipment
9. Functions
10. Maintenance
11. Ordering spare parts
12. Disposal and recycling
Anleitung_RT-TS 1221_SPK1:_ 24.01.2011 9:21 Uhr Seite 13
8
GB
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1/2)
1 Saw table
2 Saw blade guard
3 Push stick
4 Saw blade
5 Splitter
6 Table insert
7 Parallel stop
8 Motor
9 Power cable
10 Stand
11 On/Off switch
12 Star-grip screw for parallel stop
13 Scale for angle settings
14 Angle stop
15 Locking handle
16 Round handle for angle settings
17 Round handle for cutting height settings
18 Overload switch
19 Chip bin cover
20 Fixing screws
21 Table width extension
22 Swing-out support foot
3. Items supplied
Carbide-tipped saw blade
Parallel stop
Push stick
Bench-type circular saw
Angle stop
Ring wrench (30)
Wrench (31)
Operating instructions
Safety information
Table width extension (21)
4. Proper use
The bench-type circular saw is designed for cutting all
types of timber commensurate with the machine’s
size. The equipment is not to be used for cutting any
type of round wood.
The machine is to be used only for its prescribed
purpose.
Any use other than that mentioned is considered to
be a case of misuse. The user/operator and not the
manufacturer shall be liable for any damage or injury
resulting such cases of misuse. The machine is to be
operated only with suitable saw blades. It is
prohibited to use any type of cutting-off wheel.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about its potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
occupational health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machine’s construction and
design:
Contact with the saw blade in the uncovered saw
zone.
Reaching into the running saw blade (cut
injuries).
Kick-back of workpieces and parts of workpieces
Saw blade fracturing.
Catapulting of faulty carbide tips from the saw
blade.
Anleitung_RT-TS 1221_SPK1:_ 24.01.2011 9:21 Uhr Seite 14
Product specificaties
| Merk: | Einhell |
| Categorie: | Zaagmachine |
| Model: | TH-TS 1221 |
Heb je hulp nodig?
Als je hulp nodig hebt met Einhell TH-TS 1221 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Einhell
2 September 2025
2 September 2025
2 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
15 Augustus 2025
Handleiding Zaagmachine
- EGO
- Duro Pro
- Lux Tools
- Huvema
- Makita
- Ferrex
- Elektra Beckum
- Exakt
- FIXIT
- Avantco
- Felisatti
- Dremel
- Plantiflor
- Tanaka
- Power Smart
Nieuwste handleidingen voor Zaagmachine
2 September 2025
2 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
28 Augustus 2025