Edision OS NINO+ DVB-S2 Handleiding

Edision Receiver OS NINO+ DVB-S2

Lees hieronder de 📖 handleiding in het Nederlandse voor Edision OS NINO+ DVB-S2 (2 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Congratulations on purchasing an

EDISION OS NINO + DVB-S2 + DVB-T2/C

Please note that this information is valid at the time of publication.

Current information and detailed user manuals can be found on the Internet at: www.edision.gr

Unpacking

Connecting and switching on

Remote control with 2 AAA batteries Documentation Service note

Receiver EDISION OS NINO + DVB-S2 + DVB-T2/C

Notes: The front is factory tted with a protective foil

which can be removed easily and with caution. (Protective foil only for devices with display)

The scope of delivery may also include parts not listed here

Front Panel

1 POWER button: Activates/Deactivates the device

2 CH- / CH+ buttons: for moving in the program lists

Infrared sensor for the reception of remote

control commands

Display LED, displays current information

5 Card reader

Back Panel

6 Input for connecting to terrestrial or cable signal

from the antenna

7 LNB IN: Connection for the coaxial cable

to the signal from the satellite system

8 IR IN: Infrared connection port

9 HD OUT: Connection to an HDTV quality TV

ETHERNET: Ethernet port RJ45 10/100 Mbps

S/PDIF: Audio interface for amplier/audio console

RS 232: For connecting to a PC,

using RS-232 cable, for receiver software update

Connection for an adapter (DC 12V/2,0A)

Subpage

/ 2 x USB: Connection for USB storage devices

Note: For interference-free satellite TV reception,

a specialist technician must calibrate your satellite

TV system with a digital TV level meter

•

Connect the receiver using HDMI cable

via the HD output port to your TV’s HD input port.

•

Now connect the receiver to the satellite

antenna cable via the input. ANT IN or LNB IN

•

Insert the batteries into the remote control.

Notes on the remote control can be found on

the back of these instructions.

•

Connect the receiver to the power supply.

•

The receiver starts with the BOOT process and is operational within a short time

Please contact

your EDISION

specialist dealer

for any further

support

and service.

OS NINO + DVB-S2 + DVB-T2/C

F u l l H D L i n u x C o m b o R e c e i v e r

35mm

110mm

146mm

DC 12V/2,0 A

HD OUT

LNB IN 13/18V

400mA MAX

ETHERNETANT IN RS232IR IN S/PDIF

POWER CH- CH+

OS nino +

DC 12V/2,0 A

HD OUT

LNB IN 13/18V

400mA MAX

ETHERNETANT IN RS232IR IN S/PDIF

HDMI in

HD mi

kabel

HDMI

kabel

Power socket

HD OUT:

Output receiver

HDMI cable

TV set connection panel

Use an HDMI input!

LNB IN:

Connecting

the cable to the satellite

signal

ANT IN:

coaxial-wire

input from terrestrial /

cable signal

Antenna cable

coaxial-wire Antenna

1 2

The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support

For information about matters, please contact EDISION Hardware or Software support@edision.gr

OS NINO + DVB-S2 + DVB-T2/C

F u l l H D L i n u x C o m b o R e c e i v e r

Visit us on:

www.edision.gr

Remote Control UNIVERSAL 2in1

Power

Switches between operation and standby

< (PREV)

Return to the previous channel/service or

move to the end of the Service List or the Play List

Help

This provides users with a quick guide of

using Edision OS nino

Open main menu & select sub menu using

by navigation buttons

EXIT

Close and return to the previous menu and screen

TV / RADIO

Switch to TV mode.

Switch to Radio mode

COLOR BUTTONS

Activates certain menu functions.

Usage instructions are shown in each OSD menu

Audio

Select an audio track and a sound mode

PLAY

Starts timeshift if available

REC

Activates immediately recording-option

NUMERIC KEY (0-9)

Control the numerical operation

and change the Channel/Service

number directly

> (NEXT)

Go to the next channel/service

or move to the beginning of the

Service List or the Play List

TIMER

Start timer function

INFO

Displays the Electronic Program Guide (EPG)

information if provided

EPG

Displays the Electronic Program Guide (EPG)

information if provided

Mute

Mutes or unmutes the audio temporarily

TEXT

Switch between the teletext and TV modes

SUBTITLE

Display the subtitle language list

MANUAL INSTRUCTION FOR LEARN REMOTE CONTROL EDISION UNIVERSAL 2in1

Your set-top-box remote control has 5 learning-function keys, in the up right hand side TV keypad panel area. Each one can be used accordingly

as the following example:

1. Turning your TV set ON/OFF [TV POWER]

2. Selecting screen RATIO [Auto, 16:9, 4:3, etc)]

3. Increasing/decreasing volume [VOL+ , VOL-]

4. Command confirmation [BACK or EXIT]

The other 48 keys are for the control of the EDISION set-top-box.

SET UP FOR LEARNING FUNCTION

• Press [TV POWER] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the

key. This means the remote control is in the learning mode.

• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the key, then the red LED is flashing. It [POWER]

means this button is ready to receive the learning signal.

• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between

these two ports has to be about 2~3 CM).

• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously

for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the

signal and you have completed the learning procedure of ON/OFF key.[TV POWER]

• Then release the key of your original TV remote control.[POWER]

If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.

For the next programmable function, please repeat steps 1 to 3:

• Selecting screen ratio with RATIO [Auto, 16:9, 4:3, etc]

• Increasing/decreasing volume [VOL+ , VOL-]

• Command confirmation [BACK or EXIT]

Now you can operate your TV with the 5 programmed by you keys of your set-top box remote control. During the operation, the LED will flash to indicate that the

signal is transmitted!

EDISION 2in1 REMOTE CONTROL is compatible with all EDISION STB’s*, plus it is pre-programmed with 5 basic functions UNIVERSAL

for SAMSUNG & LG** tv sets. Alternatively, you can program its 5 programmable buttons to any 5 functions of your TV.

* For EDISION STB compatibility, please visit our webpage

**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd

respectively. Any brand name reference in this text is only for informational purposes towards the consumer

that is interested in the product.

TV POWER

VOL +

VOL - BACK

RATIO

Notes: Many of the listed buttons have multiple functions, which, are displayed in the