Edifier R20BT Handleiding

Bekijk gratis de handleiding van Edifier R20BT (7 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Edifier R20BT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

2. What’s in the box?

Note:

•Images are for illustrative purpose only and may dier from the actual product.

•For the need of technical improvement and system upgrade, information and

specications contained herein may be slightly dierent from actual product. If

any dierence is found, the actual product prevails.

Note:

•When the USB-C plug is connected to an external power adapter, you can use

AUX or Bluetooth as the input source.

•The 4-pole 3.5 mm communication po suppos wired connections to

headphones, with or without a microphone. The speaker will mute automatically

when headphones are connected. You can control the headphone volume with

the "+" / "-" button on the speaker.

Note:

The following operating systems suppo USB audio streaming: Windows 11,

Windows 10, Windows 8, and Windows 7.

Note:

In AUX mode, volume sync is not suppoed. To adjust the volume, adjust on the

speaker and your device separately.

Note:

You can customize light eects and turn on/o the lighting on EDIFIER ConneX

mobile app or EDIFIER TempoHub computer app.

7. Bluetooth connection

4. Power on/o

8. Play control

9. Light eects

10. Specications

11. Troubleshooting

Total output power (RMS): 2.5 W+2.5 W

Frequency response: 73 Hz~20 kHz

Declaration for EU

Frequency Band: 2.402 GHz~2.480 GHz

RF Power Output: ≤13 dBm (EIRP)

There is no restriction of use.

Manual

Cannot connect to your Bluetooth device

•Make sure that the distance between this product and your Bluetooth device

is less than 10 meters and there are no obstacles between them.

•Make sure that no device is connected to this product via Bluetooth.

•Make sure that this product is in Bluetooth pairing mode. If not, manually

switch it to this mode.

•Resta this product, enable Bluetooth function on your Bluetooth device,

and then t again.

•Reset this product to facto settings and t again.

No sound

•Make sure that this product and your device is properly connected.

•Make sure that the correct audio input source is selected.

•Make sure that the playback is not paused.

•Increase the volume of this product and your device.

Noise coming from speakers

EDIFIER speakers generate little noise, while the background noise of some

audio devices is too high. Please unplug audio cables and turn the volume

up. If no sound can be heard at 1 meter away from the speaker, there is no

problem with this product.

To learn more about EDIFIER, please visit www.edier.com

For EDIFIER warranty queries, please visit the relevant count page on

www.edier.com and review the section titled Warranty Terms.

USA and Canada: seice@edier.ca

South America: Please visit www.edier.com (English) or

www.edierla.com (Spanish/Pouguese) for local contact information.

● With the mobile app or the computer app, you can

•Switch EQs,

•Select or customize light eects,

•Upgrade the rmware, and

•More functions.

● EDIFIER ConneX mobile app

1. With your sma device, scan the QR code on the quick sta guide or the

packaging.

•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or

Google Play (Android devices).

2. Download and install the app.

3. Connect your sma device with the speaker via Bluetooth.

4. In Bluetooth mode, open EDIFIER ConneX App on your sma device.

5. Tap the menu for settings and playback control.

● EDIFIER TempoHub computer app

1. On your Windows or MacOS computer, access the following link:

https://www.edier.com/PC.html

2. Download and install the application.

3. Connect the speaker to your computer and switch to USB audio streaming mode.

4. Run the application and your computer will recognize the speaker automatically.

3. Cable connection

EN

1. Mobile app and computer app

5. Source selection

6. USB connection

This speaker suppos the simultaneous connection of two Bluetooth devices.

Connect to a device

1. Press the " " button to switch to Bluetooth input mode. If no device is

connected, the speaker will auto-enter Bluetooth pairing mode after powered

on (LED blinking in blue). If not, press and hold the " " button for 1.5 seconds.

2. On your device, select "EDIFIER R20BT" in its Bluetooth device list to connect,

and the blue LED will be steady lit when the connection is established.

•To disconnect from the current Bluetooth device, press and hold the " " button

for 1.5 seconds.

Connect to two devices

1. Connect to a device, and then press and hold the " " button for 1.5 seconds

(LED blinking in blue).

2. On the second device, select "EDIFIER R20BT" in its Bluetooth device list to

connect, and the blue LED will be steady lit when the connection is established.

3. On the rst device, select "EDIFIER R20BT" in its Bluetooth device list to

reconnect.

•Pause or stop playback on the current Bluetooth device before streaming audio

from the second one.

Note:

•Pin code for connection is "0000" if needed.

•To enjoy all Bluetooth functions of this speaker, make sure that your audio

source device suppos HFP, A2DP and AVRCP proles.

•If no device is connected in 10 minutes, the speaker will switch to Bluetooth

hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices

cannot nd the speaker, but (2) for a device that exists in the pairing record of

this speaker, you can select "EDIFIER R20BT" from its Bluetooth device list to

reconnect. To exit from Bluetooth hidden mode, press any button on the speaker.

•After switched to Bluetooth input, the speaker will reconnect to the last

connected devices automatically.

USB-Powered Speaker

R20BT

Quick start guideImportant safety instructions

Active speakerPassive speaker

1.5s

1.5s

ONOFF

USB

AUX

x1

EDIFIER R20BT

EDIFIER R20BT

Bluetooth

Settings

EDIFIER R20BT

DEVICES

Bluetooth

2:12

x1

x1

x1

x1

Product specificaties