ECS GF8200SM-M3 Handleiding
ECS
Moederbord
GF8200SM-M3
Lees hieronder de 📖 handleiding in het Nederlandse voor ECS GF8200SM-M3 (82 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/82
Preface
Preface
Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 2.0
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. The manufacturer reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation of the
manufacturer to notify any person of such revision or changes.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits governing
this device. Changes or modifications not expressly approved by the system’s manu-
facturer could void the user’s authority to operate the equipment.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
AMD, Phenom, Athlon, Sempron and Duron are registered trademarks of AMD
Corporation.
Other product names used in this manual are the properties of their respective owners
and are acknowledged.
ii
Preface
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interfer-
ence that may cause undesired operation
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian Interference-
causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur
le matériel brouilieur du Canada.
About the Manual
The manual consists of the following:
Chapter 1
Introducing the Motherboard
Describes features of the
motherboard.
Go to Hpage 1
Describes installation of
motherboard components.
Chapter 2
Installing the Motherboard
Go to Hpage 7
Chapter 3
Using BIOS
H
Provides information on using
the BIOS Setup Utility.
Go to page 27
Chapter 4
Using the Motherboard Software
Describes the motherboard soft-
wa re
Go to Hpage 45
Chapter 5
Setting Up NVIDIA ® RAID Configuration
Provides information about SATA
RAID Setup
Go to Hpage 49
Chapter 6
NVIDIA
® Hybrid SLI ® Technology Support
Provides information about Hy-
brid SLI technology
Go to Hpage 59
Describes the eJIFFY setting up
Go to Hpage 65
Chapter 7
Setting Up eJIFFY
Provides basic troubleshooting
tips
Go to Hpage 75
Chapter 8
Trouble Shooting
iii
TT
TTTABLE OF CONTENTSABLE OF CONTENTS
ABLE OF CONTENTSABLE OF CONTENTSABLE OF CONTENTS
Preface i
Chapter 1
1
Introducing the Motherboard 1
Introduction......................................................................................1
Feature ..............................................................................................2
Motherboard Components.............................................................5
Chapter 2 7 7
7 7
7
Installing the Motherboard 7
Safety Precautions...........................................................................7
Choosing a Computer Case............................................................7
Installing the Motherboard in a Case............................................7
Checking Jumper Settings...............................................................8
Setting Jumpers...................................................................8
Checking Jumper Settings...................................................9
Jumper Settings...................................................................9
Installing Hardware........................................................................10
Installing the Processor.....................................................10
Installing Memory Modules...............................................11
Expansion Slots..................................................................15
Connecting I/O Devices................................................................22
Connecting Case Components....................................................23
Front Panel Header.............................................................25
Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive...20
Installing a Floppy Diskette Drive......................................21
Connecting Optional Devices..............................................17
Chapter 3 27
Using BIOS 27
About the Setup Utility................................................................ 27
The Standard Configuration..............................................27
Entering the Setup Utility....................................................27
Resetting the Default CMOS Values..................................28
Using BIOS......................................................................................29
BIOS Navigation Keys......................................................29
Standard CMOS Setup......................................................30
Advanced Setup.................................................................33
Advanced Chipset Setup....................................................33
Integrated Peripherals.......................................................35
Power Management Setup.................................................36
Product specificaties
| Merk: | ECS |
| Categorie: | Moederbord |
| Model: | GF8200SM-M3 |
Heb je hulp nodig?
Als je hulp nodig hebt met ECS GF8200SM-M3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord ECS
6 Juli 2023
3 Juli 2023
28 Juni 2023
26 Juni 2023
25 Juni 2023
25 Juni 2023
25 Juni 2023
24 Juni 2023
23 Juni 2023
23 Juni 2023
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord Supermicro
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
8 April 2024
8 April 2024
8 April 2024
8 April 2024
31 Maart 2024
31 Maart 2024
30 Maart 2024
30 Maart 2024
30 Maart 2024
25 Maart 2024