EBERLE UPP 16 Handleiding


Bekijk gratis de handleiding van EBERLE UPP 16 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over EBERLE UPP 16 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
- 1 -
Important!
The device may only be installed by an electrically
skilled person as shown on the circuit diagram on the
device and in these instructions. The existing safety
regulations must be followed.
The relevant installation measures must be taken to
achieve the requirements of protec- tion class II. This
independently mountable electromechanical device
rooms, with normal environment. This device conforms
to EN 61095.
Operating Instructions
UPP 16
- 2 -
1. Areas of Use
2. Electrical connection / mounting
Electromagnetic relay in housing for mounting in a
ush-mounted wall box Ø 63mm.
Can also be used in combination with room temperature
controllers to achieve switching currents of up to 16 A for
electric heating systems.
1. Disconnect mains power supply.
2. Install in flush-mounted box.
3. Wiring of UPP 16 according to wiring diagram (see mar-
king on product or these instructions). Use cable cross-
-section of 2.5 mm² for switching currents >10 A.
EBERLE Controls GmbH
Klingenhofstr. 71
90411 Nuremberg
Germany
info@eberle.de
www.eberle.de
This product should not be disposed of
with household waste. Please recycle
the products where facilities for elec-
tronic waste exist. Check with your local
authorities for recycling advice.
- 3 -
3. Wiring diagram
Abbreviation in wiring diagram
L = outer conductor (phase)
N = neutral conductor
= load connection (in combination w/ temperature
controller: heating)
L = control relay


Product specificaties

Merk: EBERLE
Categorie: Niet gecategoriseerd
Model: UPP 16

Heb je hulp nodig?

Als je hulp nodig hebt met EBERLE UPP 16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden