Earthworks SR40V Handleiding

Earthworks Microfoon SR40V

Lees hieronder de 📖 handleiding in het Nederlandse voor Earthworks SR40V (10 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

For more information, please visit

www.earthworksaudio.com or call 1-603-654-2433.

HANDHELD CONDENSER VOCAL MICROPHONE

S R 4 0 V

1 SR40V Microphone

1 Microphone Clip

1 Protective Fabric Bag

YOUR PURCHASE INCLUDES

Thank you for purchasing the

Earthworks SR40V Handheld Vocal Microphone!

S PE CI F I CAT I ON S SR40V

Frequency Response 20Hz - 40kHz

Polar Pattern Cardioid

Sensitivity 10mV/Pa (-40dBV/Pa)

Power requirements 24-48V Phantom, 10mA

Peak acoustic input 145dB SPL

Output XLR-3M

Minimum output load 600Ω, balanced between pins 2 & 3

Noise 20dB SPL (A weighted)

Dimensions Length: 7.25 in. (184mm)

Max dia: 1.95 in. (55.3mm)

Min dia: .97 in. (27.5mm)

Weight .80lb (363g)

37 Wilton Rd. Milford, NH 03055

(603) 654-2433

sales@earthworksaudio.com

earthworksaudio.com

Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a

baseline understanding of how our microphones sound, and will then be able to adjust accordingly.

Begin by removing all included components from the packaging. Make sure to mute any incoming

signal to speakers or headphones to avoid any loud “pops” when connecting.

Connect the microphone to an audio interface supplying 24-48V phantom power using a standard

XLR cable. Because of the microphone’s larger capsule size, please allow one minute for the

microphone to settle. (Plugging in the microphone while phantom power is turned on will not damage

the microphone, and will actually settle the microphone faster.)

To guarantee your microphone provides years of performance, follow these guidelines:

• Avoid extreme heat and condensing humidity.

• Rough handling may damage the microphone even if no markings are visible.

• When not in use, keep the microphone in its case.

GE T T ING STA R T ED

If you encounter issues while using your Earthworks Audio microphone, please make sure that:

• Your microphone is connected to an active power supply.

• Phantom power is being supplied to the microphone.

• Your microphone and XLR cable are well connected.

• The microphone is positioned at an appropriate distance from the sound source.

• External noise in your recording environment is kept to a minimum.

• Your recording space is at room temperature and free of dust.

If your issue persists after checking, please contact us via our website.

T R OU BL E S H OOT IN G

PR OPE R M A I N T E N A N CE

WA R R A N T Y All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:

earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our

warranty/repair department by email at: returns@earthworksaudio.com.

NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/

received second-hand, please contact us via our website.

In contrast, if one were asked to spread their arms to indicate the width of the pick-up pattern of an

Earthworks cardioid microphone, they would indicate something like shown in Figure 3a. The actual polar

response of an Earthworks cardioid microphone is illustrated in Figure 3b. Again, notice that the shaded

areas in Figures 3a and 3b are virtually the same. Notice on the Earthworks microphone (Figure 3b) that even

outside the shaded area there is a very minimal change or loss in the level of high frequency information.

Referring to Figure 2b, notice how narrow the pick-up pattern is on a conventional cardioid

microphone. In comparison, notice how much wider the pickup pattern is on the Earthworks cardioid

microphone (Figure 3b). Keep in mind that the shaded areas in these gures indicate the area where

you can obtain the full frequency response of the microphone without a signicant loss of high

frequencies.

Conventional microphones (Figure 2b) only provide a narrow window (or area) in which they can pick up

sounds with full frequency response. Figure 4 below, shows an 80-voice choir miked with conventional

microphones. It takes 6 conventional microphones, placed 6 feet in front of the choir, to adequately cover the

choir with the full frequency response of the microphones.

F E WE R M ICR OP H ONE S

R E QUI R E D

Figure 3a. Typical pick-up area (with full frequency response) of

an Earthworks cardioid microphone indicated by extending arms

Figure 4. An 80-voice choir miked with 6 conventional microphones at 6 feet

Figure 3b. Typical polar pattern (with full frequency response) of

an Earthworks cardioid microphone

There are several ways near-perfect polar response can beneﬁt you.

1. Use of fewer microphones

2. Ability to place microphones closer to the sound source for more gain before feedback.

3. No spotlighting or highlighting

4. More rejection of sounds from the rear of the microphone

5. Singers on the sides of the microphone enjoy the same quality as those in front of the

microphone.

HOW E A R T HWOR K S

NE A R  PE R F E CT

POL A R R E S P ON S E

CA N BE NE F IT YOU

Product specificaties

Merk:	Earthworks
Categorie:	Microfoon
Model:	SR40V
Kleur van het product:	Zwart
Hoogte:	184 mm
Soort:	Microfoon voor podiumpresentaties
Connectiviteitstechnologie:	Bedraad
Diameter:	55.3 mm
Aansluiting:	XLR-3
Stroomverbruik:	10 mA
Microphone direction type:	Hypercardioïde/subcardioïde microfoon
Gevoeligheid microfoon:	-40 dB
Frequentie microfoon:	20 - 40000 Hz
Microphone input impedance:	65 Ohm
XLR out:	1
Aantal producten inbegrepen:	1 stuk(s)
Maximaal geluidsdrukniveau (1 kHz):	145 dB
Gewicht microfoon:	377 g
Gevoeligheid (1 kHz):	10 mV/Pa
Spook power:	24 - 48 V
Equivalent geluidsniveau:	20 dB
Inclusief klem:	Ja