Earthworks SR30 Handleiding

Earthworks Microfoon SR30

Lees hieronder de 📖 handleiding in het Nederlandse voor Earthworks SR30 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Product Registration

To help you get the most out of your

Earthworks purchase, please take a moment

and register your product with us online at

earthworksaudio.com/register.

Service & Repair

If you have any problems with your Earthworks

products, please contact our Service & Repair

Department.

Email: returns@earthworksaudio.com

Telephone: (603) 654-2433, ext. 119

MADE IN USA

Printed in USA

User’s Guide

™

earthworksaudio.com

July 11, 2018

Pin 1

“Shield”

Pin 2

“+”

Pin 3

“ ”-

Description

The Earthworks SR30 is a directional pre-polarized con-

denser microphone with a rst-order cardioid pickup pat-

tern directly coupled to a dedicated wideband, low out-

put impedance transformerless preamplier. The SR30

requires a standard 24-48V Phantom Power supply. It

features a frequency response from 20Hz to 30kHz, fast

impulse response, very low handling noise, uniform po-

lar pattern, and high SPL handling capabilities. It pro-

vides excellent uncolored rejection of sounds arriving

off-axis.

Each microphone is delivered with its own calibration

chart providing the individually measured frequency re-

sponse curve. A mounting clip is included with the mi-

crophone.

Applications

The Earthworks SR30 is easy to operate. Connect the

microphone to a microphone preamplier supplying 24-

48V phantom power using a standard XLR microphone

cable. Please allow up to one minute for the microphone

to settle. Plugging in the microphone “hot” (phantom

power already present at the input) will not damage the

microphone, and is actually preferred for faster settling.

It is normal for any phantom powered mic to “pop” when

plugged in or powered up. Make sure to mute the signal

to speakers or headphones when phantom power is rst

applied.

The excellent performance characteristics of the SR30

make it ideal for a wide range of applications. In the

studio or on stage the SR30 is an ideal choice for a va-

riety of instruments including sax, ute, trumpet, guitar,

piano, and percussion. It is superior for choir because

it doesn’t spotlight. Rather, it picks up an entire section

with no hot spots. The SR30 is popular among concert

tapers because of its open uncolored sound and among

jazz enthusiasts for its ability to capture explosive per-

formances while retaining the subtle nuances of artistic

expression.

This microphone has no removable parts.

Care of Microphone

The Earthworks SR30 microphone is a precision instru-

ment designed and built to provide years of top perfor-

mance. Following these simple rules will help to protect

your investment in the SR30:

Avoid touching the front protective screen.

Never attempt to disassemble the microphone –

it cannot be opened.

Avoid extreme heat and condensing humidity.

Allow the microphone to warm up in the case when

bringing it in from the cold weather.

Rough handling may damage the microphone even

if no visible marks are left.

When not in use keep the SR30 in its case.

•

XLR Output Connector Assignment of SR30

Specications

Frequency response: 20Hz to 30kHz

Polar Pattern: Cardioid

Sensitivity: 20mV/Pa (-34dBV/Pa)

Power Requirements: 24-48V Phantom, 10mA

Peak Acoustic Input: 139dB SPL

Output: XLR-3

Output Impedance: 65Ω, balanced between pins 2 & 3

Minimum Load: 600Ω btw. pins 2 & 3

Noise: 16dB, A equivalent

Dimensions L x D: 229 x 22 mm (9 x .860 in.)

Weight: 225g (.5lb)

Impulse Response of SR30 (typical)

Polar Response of SR30 (typical)

Frequency Response of SR30 (typical)

Specications are subject to change without notice.

Product specificaties

Merk:	Earthworks
Categorie:	Microfoon
Model:	SR30
Kleur van het product:	Roestvrijstaal
Diepte:	229 mm
Hoogte:	22 mm
Soort:	Microfoon voor instrumenten
Connectiviteitstechnologie:	Bedraad
Diameter:	225 mm
Aansluiting:	XLR-3
Stroomverbruik:	10 mA
Microphone direction type:	Cardioïde
Gevoeligheid microfoon:	-34 dB
Frequentie microfoon:	20 - 30000 Hz
Microphone input impedance:	65 Ohm
XLR out:	1
Aantal producten inbegrepen:	2 stuk(s)
Maximaal geluidsdrukniveau (1 kHz):	139 dB
Gevoeligheid (1 kHz):	20 mV/Pa
Spook power:	24 - 48 V
Equivalent geluidsniveau:	16 dB
Inclusief klem:	Ja