Durkopp Adler 610 Handleiding
Bekijk gratis de handleiding van Durkopp Adler 610 (134 pagina’s), behorend tot de categorie Naaimachine. Deze gids werd als nuttig beoordeeld door 101 mensen en kreeg gemiddeld 4.7 sterren uit 51 reviews. Heb je een vraag over Durkopp Adler 610 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/134
610-01/630-01
Service Instructions
All rights reserved.
Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the written approval in advance of Dürkopp Adler AG.
Copyright © Dürkopp Adler AG 2016
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Table of Contents
Service Instructions 610-01/630-01 - 02.0 - 12/2016 1
1 About these instructions ........................................................... 5
1.1 Scope of the instructions .............................................................. 5
1.2 Representation conventions – symbols and characters ............... 5
1.3 Other documents .......................................................................... 6
1.4 Liability.......................................................................................... 7
1.4.1 Transport ...................................................................................... 7
1.4.2 Proper use .................................................................................... 7
2 Safety instructions ..................................................................... 9
2.1 Basic safety instructions ............................................................... 9
2.2 Signal words and symbols used in warnings.............................. 11
3 Working basis ........................................................................... 15
3.1 Sequence of settings .................................................................. 15
3.2 Laying the cables........................................................................ 15
3.3 Removing covers........................................................................ 16
3.3.1 Tilting and re-erecting the machine head ................................... 16
3.3.2 Removing and fitting the head cover .......................................... 17
3.3.3 Removing and fitting the arm cover............................................ 18
3.3.4 Removing and fitting the covers on the base plate..................... 19
3.3.5 Removing and inserting the throat plate..................................... 20
3.3.6 Removing and inserting the top feed foot and sewing foot......... 21
3.3.7 Removing and installing the feeds.............................................. 22
3.3.8 Removing and fitting the oil pan ................................................. 23
3.3.9 Removing and fitting the upper belt guard.................................. 24
3.3.10 Removing and fitting the lower belt guard .................................. 25
3.4 Removing disruptive components .............................................. 26
3.4.1 Removing and installing the thread cutter .................................. 26
3.4.2 Removing and installing the needle protection........................... 28
3.4.3 Removing and installing the looper and looper mounting........... 29
3.5 Flat surfaces on shafts ............................................................... 30
3.6 Locking the machine................................................................... 30
4 Gauge and key set.................................................................... 33
5 Setting the adjusting disk to the arm shaft crank ................. 36
6 Setting the holding position of the machine.......................... 38
7 Setting the lower toothed belt wheel ...................................... 39
8 Setting the sewing foot ............................................................ 40
8.1 Setting the sewing foot stroke .................................................... 40
8.2 Setting the speed of the sewing foot lifting ................................. 41
9 Setting the looper ..................................................................... 42
9.1 Setting the rocker bolt and the left lower shaft bearing .............. 42
9.1.1 Draining and filling the oil in the looper drive housing ................ 43
9.1.2 Removing and fitting the looper drive housing ........................... 44
9.1.3 Setting the left lower shaft bearing ............................................. 45
9.1.4 Setting the rocker bolt................................................................. 46
9.2 Setting the looper drive housing................................................. 48
9.3 Setting the needle evasive movement (ellipsis width) ................ 49
9.3.1 Setting the needle evasive movement........................................ 50
Product specificaties
| Merk: | Durkopp Adler |
| Categorie: | Naaimachine |
| Model: | 610 |
Heb je hulp nodig?
Als je hulp nodig hebt met Durkopp Adler 610 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Naaimachine Durkopp Adler
17 Juni 2024
17 Juni 2024
16 April 2024
18 December 2023
20 Maart 2023
20 Maart 2023
20 Maart 2023
3 Juli 2023
30 Juni 2023
20 Maart 2023
Handleiding Naaimachine
- Prixton
- Tristar
- Guzzanti
- Bernette
- Medion
- Brother
- Łucznik
- Crofton
- Ambiano
- Alfa
- SteamMax
- LERAN
- Jocca
- W6
- Kunft
Nieuwste handleidingen voor Naaimachine
15 Juni 2025
23 Mei 2025
16 Mei 2025
15 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025