DS18 SLG-UDSD6LD-20UP Handleiding

DS18 Niet gecategoriseerd SLG-UDSD6LD-20UP

Bekijk gratis de handleiding van DS18 SLG-UDSD6LD-20UP (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.3 sterren uit 1.5 reviews. Heb je een vraag over DS18 SLG-UDSD6LD-20UP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
ENGLISH | ESPAÑOL
OWNER’S MANUAL
MANUAL DEL USUARIO
DESIGNED FOR
SPECIALLY
SLINGSHOT
POLARIS SLINGSHOT UNDER DASH ENCLOSURE
WITH DUAL ZR6.4D SUBWOOFERS INCLUDED
CAJA PARA DEBAJO DEL TABLERO DEL POLARIS SLINGSHOT
SLG-UDSD6LD-20UP
2020
TO CURRENT
INTRODUCTION:
Maximize the BOOM in your Polaris Slingshot with
this Passenger Side Under Dash Subwoofer
Enclosure by DS18! This enclosure comes loaded
with two 6.5” subwoofers underneath your dash
to put some BOOM in your Slingshot’s system.
They match the factory look of the Polaris
Slingshot and are very easy to install using factory
bolts location that fit perfectly into place and don’t
interfere with your factory glove box.
POLARIS SLINGSHOT UNDER DASH ENCLOSURE WITH DUAL
ZR6.4D SUBWOOFERS INCLUDED
CAJA PARA DEBAJO DEL TABLERO DEL POLARIS SLINGSHOT CON
SUBWOOFERS DUALES ZR6.4D INCLUIDOS
FEATURES:
600 Watts RMS Power Handling.
1200 Watts MAX Power Handling.
Two 6.5” ZR6.4D Subwoofers Included.
1 Ohm Total Load Impedance.
Easy to install - All Hardware and
Wiring Included.
OFC 12Ga Wiring, Tinned for More Power
Handling and Durability.
Fits Slingshot Models from 2020 - to Current.
Coated Metal Bracket for Better Resistance to
the Elements.
Durable (PE) Waterproof Enclosure with UV
Protection.
0.3ft3 / 8.5L Sealed Type Enclosure.
Damping Material for Better Subwoofers
Performance.
Black OEM Finish.
CARACTERÍSTICAS:
Manejo de potencia de 600 Watts RMS.
Manejo de potencia de 1200 Watts MAX.
Dos subwoofers ZR6.4D de 6.5” incluidos.
Impedancia de carga total de 1 ohmio.
Fácil de instalar con todo el hardware y
cableado incluidos.
Cableado 12Ga de cobre libre de oxígeno (OFC),
estañado para mayor manejo de potencia
y durabilidad.
Se adapta a los modelos Slingshot de 2020
en adelante.
Soporte de metal r estido para una mejor ev
resistencia a los elementos.
Caja impermeable (PE) resistente con protección UV.
Caja impermeable sellada de 0.3ft3 / 8.5L.
Material reductor de vibraciones para obtener un
mejor rendimiento de los subwoofers.
Acabados de textura negra como plásticos OEM.
WHAT’S IN THE BOX:
Subwoofer Enclosure with Two
ZR6.4D Subwoofers
Mounting Bracket
2 x M8 x 1” Screws and Washers
6mm Allen Key
QUÉ HAY EN LA CAJA:
Caja de subwoofer con dos subwoofers ZR6.4D
Soporte de montaje
2 tornillos y arandelas M8 x 1”
Llave Allen de 6mm
INTRODUCCIÓN:
Maximiza el BOOM en tu Polaris Slingshot con esta
caja de subwoofer debajo del tablero del lado del
pasajero de DS18! Esta caja viene cargada con dos
subwoofers de 6.5” debajo del tablero para darle algo
de BOOM al sistema de su Slingshot. Coinciden con el
aspecto de fábrica del Polaris Slingshot y son muy
fáciles de instalar utilizando la ubicación de los pernos
de fábrica que encajan perfectamente y no interfieren
con la guantera de fábrica.
SLG-UDSD6LD-20UP
1
INSTALLATION /
INSTALACIÓN:
Open the hood of the Slingshot to gain access to the
engine bay. Then, look at the glovebox area on the
passenger side. You will see a plane area where the
provided bracket will be mounted. (Picture 1)
Abra el capó del Slingshot para acceder al comparti-
mento del motor y mire el área de la guantera en el
lado del pasajero. Verá un área plana donde se
montará el soporte provisto. (Imagen 1)
BEFORE BEGINNING INSTALLATION,
READ THESE INSTRUCTIONS CAREFULLY
This kit requires an aftermarket amplifier with the
speaker wires routed to this location. Following this
step, install the speakers. Connect the speakers
using the previously installed speaker wires.
Secure the speakers using stainless steel screws
and tighten them. Be careful not to over-tighten, as
this may damage the hole and prevent the speakers
from being properly secured.
Este kit requiere un amplificador adicional con los
cables de los altavoces encaminados a esta
ubicación. Siguiendo este paso, instale los altavoces.
Conecte los altavoces utilizando los cables de
altavoz previamente instalados.
Asegure los altavoces con tornillos de acero
inoxidable y apriételos. Tenga cuidado de no
apretarlos demasiado, p3-ya que podría dañar el orificio
y no asegurar adecuadamente los altavoces.
ANTES DE COMENZAR LA INSTALACIÓN,
LEA ESTAS INSTRUCCIONES
CUIDADOSAMENTE
1
2


Product specificaties

Merk: DS18
Categorie: Niet gecategoriseerd
Model: SLG-UDSD6LD-20UP

Heb je hulp nodig?

Als je hulp nodig hebt met DS18 SLG-UDSD6LD-20UP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden