DS18 RY-KIT0.HD Handleiding


Bekijk gratis de handleiding van DS18 RY-KIT0.HD (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.6 sterren uit 2.5 reviews. Heb je een vraag over DS18 RY-KIT0.HD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
ENGLISH | ESPAÑOL
RY-KIT4.HD
RY-KIT0.HD
RY-KIT8.HD
OWNER'S MANUAL
MANUAL DE USUARIO
EXTRA AMPLIFIER POWER WIRING KIT
FOR HARLEY DAVIDSON
KIT DE CABLEADO DE ALIMENTACIÓN
HARLEY DAVIDSON
OFC
TINNED WIRING
RY-KIT.hd
EXTRA AMPLIFIER POWER WIRING
KIT FOR HARLEY DAVIDSON
KIT DE CABLEADO DE ALIMENTACIÓN
DE AMPLIFICADOR ADICIONAL PARA
HARLEY DAVIDSON
1
INTRODUCTION INTRODUCCIÓN
WHAT IS INCLUDED IN
THE BOX?
In addition to this manual,
the box contains:
• POWER / GROUND WIRING
HARNESS
• REMOTE WIRE
• WATERPROOF FUSE HOLDER WITH
MINI-ANL FUSE
• 10 PCS 20cm CABLE TIES
• 3MM HEX ALLEN KEY
Thank you for purchasing this DS18 OFC
power wiring kit for your ride, specially
designed and built with the best materials to
obtain the highest performance and very
long life. This kit is for upgrading or
expanding the factory audio system on
many 1996 and later bagger HD models
including Electra Glide (FLHT), Street Glide
(FLHX), Road Glide (FLTR) and some TRIKEs.
Use this kit to install an extra amplifier (Not
Included) on your HD, we recommend being
small and weather resistant amplifier that is
suitable for motorcycle applications. This kit
may also be adapted to other makes and
models with a 12V battery. Depending on
the type of radio, additional audio interface
may be needed for signal connection
between the source unit and the amplifier
(RY-HARNESS.HD or similar sold
separately).
Gracias por comprar este kit de cableado de
alimentación DS18 OFC para su moto,
especialmente diseñado y construido con los
mejores materiales para obtener el máximo
rendimiento y muy larga vida. Este kit es para
actualizar o ampliar el sistema de audio de
fábrica en muchos modelos Bagger HD del
1996 y posteriores, incluyendo Electra Glide
(FLHT), Street Glide (FLHX), Road Glide (FLTR)
y algunos modelos de TRIKEs. Utilice este kit
para instalar un amplificador adicional (no
Incluido) en su HD, le recomendamos que sea
un amplificador pequeño y resistente a la
intemperie que sea adecuado para utilizar en
motocicletas. Este kit también se puede
adaptar a otras marcas y modelos con batería
de 12V. Dependiendo del tipo de radio, una
interfaz de audio adicional puede ser necesaria
para asegurar la conexión entre la unidad
fuente y el amplificador (RY-HARNESS.HD o
similar vendido por separado).
Adicionalmente a este manual, la caja
contiene:
CABLEADO DE ALIMENTACIÓN / TIERRA
CABLE REMOTO
PORTAFUSIBLE A PRUEBA DE AGUA
CON MINI-FUSIBLE ANL
10 UNIDADES DE AMARRES PLÁSTICOS
DE 20cm
LLAVE ALLEN HEX 3MM
¿QUÉ SE INCLUYE EN
LA CAJA?
Harley-Davidson name is trademark of Harley-Davidson, Inc. or its affiliates or licensors.
2
FEATURES
RY-KIT8.HD
• Fits on 1996-up HD models including FLHT,
FLHX, FLTR and some TRIKEs.
• In-Line Waterproof fuse holder included.
2x30A ATC Fuse already installed on the
Fuse Holder.
(6ft) 8AWG Red + (6ft) 8AWG Black OFC
tinned Wire with protective braided sleeve,
heat shrink and Ring terminals.
• Good for an amplifier up to 840W*.
(2ft) 18AWG Blue OFC tinned Remote
Wiring with Fast plug connector.
RY-KIT4.HD
• Fits on 1996-up HD models including FLHT,
FLHX, FLTR and some TRIKEs.
• In-Line Waterproof fuse holder included.
120A Mini-ANL Fuse already installed on
the Fuse Holder.
(6ft) 4AWG Red + (6ft) 4AWG Black OFC
tinned Wire with protective braided sleeve,
heat shrink and Ring terminals.
• Good for an amplifier(s) up to 1680W*.
(2ft) 18AWG Blue OFC tinned Remote
Wiring with Fast plug connector
RY-KIT0.HD
• Fits on 1996-up HD models including FLHT,
FLHX, FLTR and some TRIKEs.
• In-Line Waterproof fuse holder included.
• 2x120A Mini-ANL Fuse already installed on
the Fuse Holder.
(6ft) 1/0AWG Red + (6ft) 1/0AWG Black
OFC tinned Wire with protective braided
sleeve, heat shrink and Ring terminals.
• Good for an amplifier(s) up to 3500W*.
(2ft) 18AWG Blue OFC tinned Remote
Wiring with Fast plug connector
*RMS Power measured at 14.4v
RY-KIT8.HD
Funciona en modelos HD del 1996 en adelante
incluyendo FLHT, FLHX, FLTR y algunas TRIKEs.
Portafusible en línea a prueba de agua incluido.
Fusible ATC 2x30A preinstalado en el
portafusible.
(6ft) Cable 8AWG Rojo + (6ft) Cable 8AWG
Negro OFC estañado con manga protectora,
termo contraíbles, y terminales de anillo.
Funciona con amplificadores de hasta 840W*.
(2ft) Cable 18AWG Azul OFC estañado
para el cable de remoto con conector de
enchufe rapido
RY-KIT4.HD
Funciona en modelos HD del 1996 en adelante
incluyendo FLHT, FLHX, FLTR y algunas TRIKEs.
Portafusible en línea a prueba de agua incluido.
Fusible Mini-ANL 120A preinstalado en el
portafusible.
(6ft) Cable 4AWG Rojo + (6ft) Cable 4AWG
Negro OFC estañado con manga protectora,
termo contraíbles, y terminales de anillo.
Funciona con amplificadores de hasta 1680W*.
(2ft) Cable 18AWG Azul OFC estañado
para el cable de remoto con conector de
enchufe rapido
RY-KIT0.HD
Funciona en modelos HD del 1996 en adelante
incluyendo FLHT, FLHX, FLTR y algunas TRIKEs.
Portafusible en línea a prueba de agua incluido.
Fusible Mini-ANL 2x120A preinstalado en el
portafusible.
(6ft) Cable 1/0AWG Rojo + (6ft) Cable 1/0AWG
Negro OFC estañado con manga protectora,
termo contraíbles, y terminales de anillo.
Funciona con amplificadores de hasta 3500W*.
(2ft) Cable 18AWG Azul OFC estañado
para el cable de remoto con conector de
enchufe rapido
*Potencia RMS medida a 14.4v
CARACTERÍSTICAS


Product specificaties

Merk: DS18
Categorie: Niet gecategoriseerd
Model: RY-KIT0.HD

Heb je hulp nodig?

Als je hulp nodig hebt met DS18 RY-KIT0.HD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden