Dri Eaz Velo F518 Handleiding

Bekijk gratis de handleiding van Dri Eaz Velo F518 (1 pagina’s), behorend tot de categorie Heater. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over Dri Eaz Velo F518 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Owner’s Manual

Velo™ & Velo™ Pro HEPA Kit

Model F518

DRI-EAZ PRODUCTS, INC.

15180 Josh Wilson Road, Burlington, WA 98233, USA

Phone: 30307950+1 800932--Fax: +1 360757--www.dri-eaz.com

The HEPA Kit allows the Velo and Velo Pro to be used for general air scrubbing applications.

Patents: http://www.LBpatents.com

READ AND SAVE THESE INSTRUCTIONS

NOTICE: Always operate the unit on a stable,

level surface so it cannot fall and cause injury.

WARNING! Do not alter or modify this product

in any way. Use only replacement parts

authorized by Dri-Eaz Products, Inc. Modifications or use of

unapproved parts could create a hazard and will void your

warranty. Contact your authorized DriEaz distributor for -

assistance.

Warranty registration

Please visit warranty.drieaz.comto register your purchase.

Registration allows us to better assist you with using, maintaining

or servicing your equipment and to contact you in case we have

important safety information concerning your DriEaz product. -

TIP: Retain the product box for convenient storage and

transport.

INSTALLATION INSTRUCTIONS

Follow the steps indicated below to install the HEPA attachment to

your Velo unit.

MAINTENANCE

Change Prefilter Cover whenever dust accumulation is visible.

Part ( F52020pack).

Change HEPA lter when airflow is noticeably reduced. Part F519

(1 pack).

Wipe off top and filter frame as needed.

FOR QUESTIONS, CALL YOUR LOCAL DISTRIBUTOR or contact the

Dri---Eaz Service Department at 8009323030.

2. Slide HEPA filter element

down over filter frame. Ensure

filter is centered over the Velo

air intake.

4. Place top over HEPA filter

assembly and tighten with

wingnut. This will lock the filter

assembly snugly to the

airmover. Do not overtighten.

3. Pull prefilter cover down

over HEPA filter element.

Fig. A: Installing the HEPA Kit

1. Center the filter frame over the

top of the impeller assembly. With

frame hooks in place under intake

grill, Rotate the frame clockwise

until the hooks fit under the intake

grill crossbars.

0701888518 20140425-B F -05 Warranty 07-0 1 -DriEaz Products, Inc.

Product specificaties