Dri Eaz Stealth AV3000 Handleiding

Dri Eaz Heater Stealth AV3000

Lees hieronder de 📖 handleiding in het Nederlandse voor Dri Eaz Stealth AV3000 (6 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
07- G F568 1 Legend Brands, Inc. 02189
Owner’s Manual
Stealth AV3000 Airmover
Model F568
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: +1 800-932-3030 Fax: +1 360-757-7950 LegendBrandsRestoration.com
The Stealth produces high velocity airow for ventilation and
to accelerate the evaporation of moisture from structural and other materials.
Patents: http://www.LBpatents.com
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING! To reduce the risk of re or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING! Unit must be grounded. Do not
use with an extension cord. Connect only to an outlet provided
with a ground fault interrupting device.
WARNING! Never operate a unit with a damaged power cord, as
this may lead to electrical or re hazards. If power cord is
damaged, it must be replaced by a cord of the same type and
amperage rating.
WARNING! Do not touch grills when unit is operating.
NOTICE: Keep motor dry. For indoor use only.
NOTICE: Unplug when not in use or when moving unit.
NOTICE: Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
NOTICE: Always operate the unit on a stable, level surface so it
cannot fall and cause injury.
WARNING! Do not alter or modify the Stealth AV3000 in any
way. Use only replacement parts authorized by Legend Brands,
Inc. Modications or use of unapproved parts could create a
hazard and will void the product warranty. Contact an authorized
Dri-Eaz distributor for assistance.
WARNING!
a) Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair.
b) Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from trac area and
where it will not be tripped over.
BEFORE YOU BEGIN
Warranty registration
Please visit warranty.drieaz.com to register your product.
Registration allows Dri-Eaz to better assist with operation,
maintenance, servicing of equipment, and to contact you in case
there is important safety information concerning your Dri-Eaz
product. If you determine service is required, have your
equipment model, serial number and original proof of purchase
available and call your distributor for assistance with obtaining a
return material authorization (RMA).
Fig. A: Parts Identication
Cord wrap. Wind cord
around housing in groove.
Secure cord with plug clip.
Variable speed control
Outlet grill. Keep
clear of obstructions.
Power outlet socket .
Tighten knob to secure
fan orientation.
Inlet grill. Keep clear
of obstructions.
Carry handle
Hour meter.
07- G F568 2 Legend Brands, Inc. 02189
OPERATING INSTRUCTIONS
1. Unwrap the cord and plug the unit into a standard 115V
GFCI-protected outlet. CAUTION: Be sure switch is in the
o position before connecting unit to power outlet.
2. For ventilation, direct the Stealth outlet where desired. For
drying, direct the outlet toward the surface to be dried.
Secure the airmover orientation by tightening the knobs on
either side of the unit.
3. When nished, unplug the unit and re-wrap the cord in the
cord wrap.
Electrical safety devices
Circuit breaker: If the circuit breaker detects overload or short
circuit conditions, the breaker will automatically shut o the
electrical supply. If this should occur, check the power cable
carefully for any damage and ensure it is plugged into a properly
grounded outlet. Press the Circuit Breaker Reset Switch (Fig. A)
to reestablish the electrical supply.
TRANSPORT AND STORAGE
Always use the handle to load or carry the unit.
For cord storage, wrap cord around housing in groove. Pull cord
snug and secure with plug clip (Fig. A) .
Units may be stacked up to ve high for transport and storage
(Fig. C). To stack, tip rst unit back onto its outlet side and nest
additional units on top (Fig. A) .
When transporting, secure the unit(s) carefully to prevent sliding
and damage to the unit and/or injury to vehicle occupants.
Keep unit dry. Do not expose the unit to rain or snow.
MAINTENANCE
WARNING: Unplug unit before performing any maintenance.
Before each u se
Inspect the power cord. If cord is damaged, do not use. Always
grasp the plug (not the cord) to unplug.
As needed
Clean housing and impeller. If dust accumulation is visible in the
interior remove the four screws from the outlet grill as shown ,
(Fig. B) Clean impeller assembly and all surfaces with .
pressurized air and/or with a soft cloth. Do not apply liquids to
the impeller assembly. The housing may be cleaned with a mild
solution of detergent and warm water. Ensure housing is
completely dry before reassembling.
FOR SERVICE CALL YOUR LOCAL DISTRIBUTOR or the
Dri-Eaz Service Department at 800- -932 3030.
SPECIFICATIONS
Model
Stealth AV3000 (F ) 568
Volts
115
Frequency
60 Hz
Amp draw
2.7
Power (motor rating)
0.46 hp / 340W
Weight
27.5 lbs. 12.5 | kg
Dimensions
(D × W × H)
10.8 24.3 24.0 in. × ×
27.4 61.7 61.0 × × cm
Units per 15 amp
circuit
Up to 4
Air movement
2600 CFM 4417 CMH |
Static pressure (H2O)
0.40 in. | 99 Pa
Sound level (avg.)
58 72 dB
Control
Variable speed rotary switch
Cord length
16 ft. | 4.9 m
Construction
Rotomolded polyethylene and injection
molded ABS housing components; steel
wire inlet and outlet grills.
Safety
ETL listed to UL/ULc and CSA standards
Specications are subject to change without notice. Some values
may be approximate.
Fig. B: Disassembly for cleaning
Remove the four screws as shown and lift o the front assembly.
Retain screws for reassembly. Do not overtighten screws.
Fig. C: Stacking for
storage or transport
07- G F568 Legend Brands, Inc. 02189
Manual de Uso
Stealth AV3000 Airmover
Modelo F568
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, EEUU
Tel: +1 800-932-3030 Fax: +1 360-757-7950 LegendBrandsRestoration.com
El sigilo produce ujo de aire de alta velocidad para la ventilación y de enfriamiento y para acelerar la evaporación de la
humedad de los materiales estructurales y otros.
Patentes: http://www.LBpatents.com
L E A Y C O N S E R V E E S T A S I N S T R U C C I O N E S
¡ADVERTENCIA! Para reducir el riesgo de
incendio o descarga eléctrica, no use este
ventilador con ningún dispositivo sólido de
control de velocidad.
¡ADVERTENCIA! La unidad debe tener
puesta a tierra. No utilizar con un cable de extensión. Conectar
solamente a un toma provisto de interruptor por fallo con puesta
a tierra.
¡ADVERTENCIA! Nunca haga funcionar una unidad con un
cable de alimentación dañado, p3-ya que puede generar riesgos
eléctricos o de incendio. Si el cable de alimentación está
dañado, debe ser sustituido por un cable del mismo tipo y
amperaje.
¡ADVERTENCIA! No toque las parrillas cuando la unidad esté
en funcionamiento.
ATENCIÓN: Mantenga el motor seco. Sólo para uso en
interiores.
ATENCIÓN: Desenchufar cuando no se halle en uso o cuando
se esté desplazando la unidad.
ATENCIÓN: No permita que los niños jueguen con la unidad o
cerca de ella. Asegúrese de que la unidad no quede accesible a
los niños cuando no se la esté controlando.
Siempre opere la unidad sobre una supercie estable y nivelada
para que no pueda caerse y causar lesiones.
¡ADVERTENCIA! No altere ni modique de manera alguna el
Stealth. Utilice sólo piezas de repuesto autorizadas por Legend
Brands, Inc. Cualquier modicación o el uso de piezas no
autorizadas podrían provocar un accidente y anularán la
garantía. Póngase en contacto con su distribuidor autorizado de
Dri-Eaz para obtener ayuda.
¡ADVERTENCIA!
a) No opere ningún ventilador que tenga el cable o enchufe
dañados. Saque de uso el ventilador o devuélvalo a un centro de
servicio autorizado para su revisión y/o reparación.
b) No coloque el cable debajo de alfombras. No cubra el cable
con tapetes o cubiertas similares. No haga pasar el cable por
debajo de muebles o electrodomésticos. Coloque el cable lejos
del área de tránsito, donde nadie pueda tropezar con el mismo.
ANTES DE EMPEZAR
Registro de la Garantía
Por favor visite para registrar compra. El warranty.drieaz.com el
registro nos permite ofrecerle ayuda para el uso, mantenimiento
o servicio de su equipo, y contactarle en caso de que tengamos
información de seguridad importante con respecto a producto
Dri-Eaz. Si considera que se necesita una reparación, tenga a
mano la información del modelo de su equipo, número de serie y
comprobante original de compra, y llame a su distribuidor para
que lo ayude a obtener una autorización de devolución de
material (RMA).
Fig. A: Identicación de las partes
Enrollar cable. Enrolle el cable
alrededor de la carcasa. Asegúrelo
con el clip para el cable.
Control de velocidad
variable
Parrilla de salida.
Mantener libre de
obstrucciones
Enchufe de energía
Ajustar la perilla para
asegurar el ventilador en
una orientación
Parrilla de entrada.
Mantener libre de
obstrucciones
Manija para
acarreo
Perilla del Interruptor de
Circuito
Medido de tiempo.


Product specificaties

Merk: Dri Eaz
Categorie: Heater
Model: Stealth AV3000

Heb je hulp nodig?

Als je hulp nodig hebt met Dri Eaz Stealth AV3000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Dri Eaz

Handleiding Heater

Nieuwste handleidingen voor Heater