Dremel 1680 Handleiding

Dremel Zaagmachine 1680

Lees hieronder de 📖 handleiding in het Nederlandse voor Dremel 1680 (64 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64
owner’s manual
MODEL 1680, VARIABLE SPEED
16” SCROLL SAW
Form No. 2610914195 7/01 Printed in Taiwan
Parlez-vous français? Voir page 21
¿Habla español? Ver pågina 41
P.O. Box 1468
Racine, Wisconsin
1-800-437-3635
http://www.dremel.com
Voltage rating 120 V 50 - 60Hz
Amperage rating 1.4 A
No load speed n0 500-1,600/min
Throat 16”
Blade 5” Plain and pin-end
Blade stroke 3/4”
Cutting capacity 2” at 0Âș; 1” at 45Âș
assembly ‱ operation ‱ safety instructions
2.
Work Area
KEEP CHILDREN AWAY
Do not let visitors contact tool or extension cord. All visi-
tors should be kept away from work area.
KEEP WORK AREAS CLEAN
Cluttered areas and benches invite accidents.
MAKE WORKSHOP CHILD-PROOF
With padlocks, master switches.
AVOID DANGEROUS ENVIRONMENTS
Don’t use power tools in damp or wet locations. Keep
work area well lit. Do not expose power tools to rain. Do
not use the tool in the presence of flammable liquids or
gases.
Personal Safety
KNOW YOUR POWER TOOL
Read and understand the owner’s manual and labels
affixed to the tool. Learn its application and limitations as
well as the specific potential hazards peculiar to this tool.
DON’T OVERREACH
Keep proper footing and balance at all times.
STAY ALERT
Watch what you are doing. Use common sense. Do not
operate tool when you are tired. Do not operate while
under medication or while using alcohol or other drugs.
DRESS PROPERLY
Do not wear loose clothing or jewelry. They can be caught
in moving parts. Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear protective
hair covering to contain long hair.
USE SAFETY GLASSES
Also face or dust mask if cutting operation is dusty, and ear
plugs during extended periods of operation.
Everyday eyeglasses have only impact resistant lenses,
they are NOT safety glasses.
GUARD AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces. For exam-
ple: pipes, radiators, ranges, refrigerator enclosures.
DISCONNECT TOOLS FROM POWER SOURCE
When not in use, before servicing, when changing
blades, bits, cutters, etc.
KEEP GUARDS IN PLACE
In working order, and in proper adjustment and
alignment.
REMOVE ADJUSTING KEYS AND WRENCHES
Form the habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
AVOID ACCIDENTAL STARTING
Make sure the switch is in the “OFF” position before plug-
ging in tool.
GROUND ALL TOOLS
This tool is equipped with an approved 3-conductor cord
and a 3 prong grounding type plug to fit the proper
grounding type receptacle. The green conductor in the
cord is the grounding wire. Never connect the green wire
to a live terminal.
NEVER STAND ON TOOL OR ITS STAND
Serious injury could occur if the tool is tipped or if the cut-
ting tool is accidentally contacted. Do not store materials
on or near the tool such that it is necessary to stand on the
tool or its stand to reach them.
CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part that is
damaged should be carefully checked to ensure that it will
operate properly and perform its intended function. Check
for alignment of moving parts, mounting, and any other
conditions that may affect its operation. A guard or other
part that is damaged should be properly replaced.
All repairs, electrical or mechanical, should
be attempted only by trained repairmen.
Contact the nearest Dremel Service Center, Authorized
Dremel Service Station or other competent repair service.
Use only Dremel replacement parts; any
others may create a hazard.
The use of any other accessories not spec-
ified in the current Dremel catalog, may cre-
ate a hazard.
General Safety Rules
“READ ALL INSTRUCTIONS” Failure to follow the safety rules listed below
and other basic safety precautions may result in serious personal injury.
“SAVE THESE INSTRUCTIONS”
WARNING
!
WARNING
!
WARNING
!
WARNING
!
3.
Tool Use
DON’T FORCE TOOL
It will do the job better and safer at the rate for which it was
designed.
USE THE RIGHT TOOL
Don’t force a small tool or attachment to do the job of a
heavy duty tool. Don’t used tool for purpose not intend-
ed—for example, don’t use a circular saw for cutting tree
limbs or logs.
SECURE WORK
Use clamps or a vise to hold work when practical. It’s safer
than using your hand and it frees both hands to operate
the tool.
NEVER LEAVE TOOL RUNNING UNATTENDED
Turn power off. Don’t leave tool until it comes to a com-
plete stop.
Tool Care
DO NOT ALTER OR MISUSE TOOL
These tools are precision built. Any alteration or modifica-
tion not specified is misuse and may result in dangerous
conditions.
AVOID GASEOUS AREAS
Do not operate electric tools in a gaseous or explosive
atmosphere. Motors in these tools normally spark, and
may result in a dangerous condition.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for better and safer perfor-
mance. Follow instructions for lubricating and changing
accessories. Inspect tool cords periodically and if dam-
aged, have repaired by authorized service facility. Inspect
extension cords periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
Before connecting the tool to a power
source (receptacle, outlet, etc.), be sure
voltage supplied is the same as that specified on the name-
plate of the tool. A power source with a voltage greater than
that specified for the tool can result in serious injury to the
user, as well as damage to the tool. If in doubt, DO NOT
PLUG IN THE TOOL. Using a power source with a voltage
less than the nameplate rating is harmful to the motor
.
Additional Safety Rules
For your own safety, do not operate your
Scroll Saw until it is completely assembled
and installed according to the instructions...and until you
have read and understood the following:
1. General Safety Rules..............................................2-4
2. Motor Specifications and Electrical ..........................
Requirements ............................................................5
3. Getting to Know Your Scroll Saw ........................8-9
4. Operating Adjustments ..........................................10
5. Basic Scroll Saw Operations ............................11-14
6. Mounting the Scroll Saw....................................15-16
7. Maintaining Your Scroll Saw ..................................17
8. STABILITY OF SAW
Your Scroll Saw must be bolted securely to a stand or
workbench. In addition, if there is any tendency for the
Scroll Saw to tip over or move during certain operations,
such as cutting long, heavy boards, bolt your Scroll Saw
stand or workbench to the floor.
9. LOCATION
This Scroll Saw is intended for indoor use only.
10. PROTECTION: Eyes, hands, face, ears and body.
TO AVOID BEING PULLED INTO THE
BLADE—
DO NOT WEAR: Loose Fitting Gloves
Necktie
Loose Clothing
Jewelry
DO: TIE BACK LONG HAIR
ROLL LONG SLEEVES ABOVE ELBOWS
a. If any part of your saw is missing, malfunctioning, has
been damaged or broken . . . such as the motor switch, or
other operating control, a safety device or the power
cord...cease operating immediately until the particular part
is properly repaired or replaced.
b. Do not cut piece too small to hold by hand.
HINT: When making a very small cut out, always secure
the workpiece to a scrap piece of plywood with double-
faced tape. This way, the work is supported and your fin-
gers are away from the blade.
c. Never turn your Scroll Saw on before clearing the table
of all objects (tools, scraps of wood, etc.) except for the
workpiece and related feed or support devices for the
operation planned.
WARNING
!
WARNING
!
WARNING
!

Product specificaties

Merk: Dremel
Categorie: Zaagmachine
Model: 1680

Heb je hulp nodig?

Als je hulp nodig hebt met Dremel 1680 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Dremel

Dremel

Dremel 1680 Handleiding

3 April 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Worx

Worx Nitro WX542.9 Handleiding

26 April 2024
Fieldmann

Fieldmann FZP 25410-B Handleiding

15 April 2024
Milwaukee

Milwaukee M18 BJS Handleiding

10 April 2024
Rona

Rona Standard Plus-C Handleiding

10 April 2024
Rona

Rona Profi-C Handleiding

10 April 2024
Milwaukee

Milwaukee SCS 65 Q Handleiding

10 April 2024
Milwaukee

Milwaukee M12 BS Handleiding

10 April 2024
Milwaukee

Milwaukee M18 FMCS66 Handleiding

10 April 2024
Milwaukee

Milwaukee M18 BSX Handleiding

10 April 2024
Bavaria By Einhell

Bavaria By Einhell BFS 800E Handleiding

9 April 2024