Draper Expert 92433 Handleiding
Draper
Meetapparatuur
Expert 92433
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper Expert 92433 (11 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 9 personen en werd door 5 gebruikers gemiddeld met 3.5 sterren beoordeeld
Pagina 1/11
92433
EN
Original Instructions
Version 3
May 2024
400 SERIES
DIGITAL
MULTIMETER
1.1 Product Reference
User Manual for: 400 Series Digital Multimeter
Stock No: 92433
Part No: DMM404
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
1.2 Revisions
Version 1: November 2019
First release
Version 2: February 2023
Version 3: May 2024
2. Contents
1. Preface 2
2. Contents 2
3. Product Introduction 2-3
4. Health and Safety Information 4
5. Identication and Unpacking 5
6. Functions 6
7. Operating Instructions 7-9
8. Product Care and Disposal 10
9. Warranty 10
10. Explanation of Symbols 11
3.1 Intended Use
This device is designed to measure voltage, current and
resistance across AC and DC circuits. Fitted with a large LCD
backlit display screen, torch and an NCV
(Non - contact voltage) sensor.
Any other application beyond the conditions established for use
will be considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
Part of our core range, this product is suitable for regular use by
enthusiasts and tradespersons alike.
3.2 Specication
Stock No. 92433
Part No. DMM404
Multimeter rating: CAT III, 1,000V/CAT IV 600V
Dimensions: L 190 x W 90 x H 50mm
Battery Type: 1 x 9V (PP3)
Fuse Type: FF20A/250V
Weight (approx.): 380g
Overload Protection: 250V DC or AC Peak
DC Voltage
Range Accuracy Resolution
600mV
±0.5% reading,
+3 digits
0.1mV
6V 0.001V
60V 0.01mV
600V
±0.8% reading,
+5 digits
0.1mV
1000V 1V
Input impedance: 10MΩ
Overload protection: 1000V DC or 750V AC peak.
AC Voltage
Range Accuracy Resolution
600mV ±1.2% reading, +5 digits 0.1mV
6V
±0.8% reading, +3 digits
0.001V
60V 0.01mV
600V
±1.0% reading, +10 digits
0.1mV
750V 1V
Input impedance: 10MΩ.
Overload protection: 1000V DC or 750V AC peak.
Frequency response: 40 ~ 1000Hz.
Display: True RMS (sine wave RMS calibration)
1.Preface 3. Product Introduction
– 2 –
AC/DC Current
Range Accuracy Resolution
60uA
1% reading, +3 digits
0.01μA
600uA 0.1μA
6000uA 1μA
60mA 0.01mA
600mA 0.1mA
20A 0.01A±2% reading,+10 digits
Maximum input current: 600mA DC or AC rms.
20A range: 20A DC or AC rms.
Resistance
Range Accuracy Resolution
600Ω
±0.8 to 1.2% reading,
+3 digits
0.1Ω
6kΩ 0.001kΩ
60kΩ 0.01kΩ
600kΩ 0.1kΩ
6MΩ 0.001MkΩ
60MΩ 0.01MkΩ
Open circuit voltage: about 1.0V.
Diode
Range Accuracy Resolution
Positive voltage
1mA typical/Reverse
voltage 3V
Capacitance
Range Accuracy Resolution
9.999nF
±4% reading + 3 digits
0.001nF
99.99nF 0.01nF
999.9nF 0.1nF
9.999μF 0.001μF
99.99μF 0.01μF
999.9μF 0.1μF
9.999mF 0.001mF
99.99mF 0.01mF
Frequency
Range Accuracy Resolution
9.999Hz
± 1.0% reading + 3 digit
0.001Hz
99.99Hz 0.01Hz
999.9Hz 0.1Hz
9.999kHz 0.001kHz
99.99kHz 0.01kHz
999.9kHz 0.1kHz
9.999MHz 0.001MHz
Input voltage range: 200mV ~ 10V AC.
Duty cycle
Range Accuracy Resolution
0.1 - 99.9% ± 3.0% 0.1%
Transistor
Range Base Current
0 – 1000hFE 10uA/Vce 2.8V
Temperature Measurement
Range Accuracy Resolution
-20°C–300°C ±1% +4 digits 1°C/1°F
301°C–1000°C ±1.9% +5 digits 1°C/1°F
-4°F–600°F ±1.2% +6 digits 11°C/1°F
601°F–1832°F 1°C/1°F±1.9% +6 digits
Operating conditions: Ambient temperature: 18–50°C
– 3 –
Product specificaties
| Merk: | Draper |
| Categorie: | Meetapparatuur |
| Model: | Expert 92433 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper Expert 92433 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur Draper
2 Juni 2025
2 Juni 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
Handleiding Meetapparatuur
- Meetapparatuur Phoenix Contact
- Meetapparatuur MASIMO
- Meetapparatuur Kübler
- Meetapparatuur Eizo
- Meetapparatuur Joy-it
- Meetapparatuur Testo
- Meetapparatuur UHoo
- Meetapparatuur Silverline
- Meetapparatuur Ermenrich
- Meetapparatuur Janitza
- Meetapparatuur Alecto
- Meetapparatuur Finder
- Meetapparatuur TFA
- Meetapparatuur Brookhuis
- Meetapparatuur Cliff
Nieuwste handleidingen voor Meetapparatuur
25 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
23 Mei 2025
23 Mei 2025
23 Mei 2025
23 Mei 2025
23 Mei 2025
23 Mei 2025