Draper Expert 23310 Handleiding

Bekijk gratis de handleiding van Draper Expert 23310 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Draper Expert 23310 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BRAKE PIPE

FLARING

TURRET KIT

23310 – BPF/PRO/TURRET INSTRUCTIONS FOR USE

EN

Original Instructions

Version 2 – January 2023

Read this manual in full before using this product and retain it for future use. Always use the latest version of

the manual. Please visit drapertools.com/manuals for the latest version.

1. Intended Use

This product is designed to are brake pipes of

various sizes according to SAE Convex, DIN Convex

and SAE Double standards. Any other application

beyond the conditions established for use will be

considered misuse. Draper Tools accepts no

responsibility for improper use of this product.

Important: Ensure that you are familiar with the

various types of ares and their applications before

using this product. ALWAYS consult the vehicle

manufacturer’s instructions before use.

WARNING! Keep your hands clear of moving

parts, clamps and punches while using this

product and keep long hair and jewellery

tied back.

2. What’s in the Box?

(C2)

(E2)

(B)

(A)

(D)(C1)

(E1)

(F)

3. Operating Instructions

1. Clamp the base of the tool into a suitable

bench-mounted vice and screw the press lever

(B) into the lever socket (1).

2. Fully loosen the die clamp lever (2) and swing

the die clamp (3) open.

1 Fig.

(2)

(4)

(1)

(B)

(3)

3. Use 6. Flaring Reference Chart to determine

the correct die and punches for the required

are.

4. Clean the die of grease and place the two parts

horizontally into the die socket (4) with the

required mould directed towards the turret (5).

2 Fig.

(6)

(6)

(5)

(C/D/E/F)

(C/D/E/F)

Important: Ensure that both parts of the die are

in contact with the die stops (6).

A. 1 × Flaring tool

assembly

B. 1 × Press lever

C. 1 × 3⁄16" combi die

C1. 3⁄16" (4.75mm)

SAE die

C2. 4.75mm DIN die

D. 1 × 1⁄4" SAE die

E. 1 × 5⁄16" combi die

E1. 5⁄16” (8mm)

SAE die

E2. 8mm DIN die

F. 1 × 3⁄8" SAE die

Product specificaties