Draper 98425 Handleiding
Draper
Schuurmachine
98425
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper 98425 (20 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 15 personen en werd door 8 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
230V OSCILLATING
SPINDLE AND BELT
SANDER
98425
– 2 –
1.1 INTRODUCTION:
USER MANUAL FOR: 230V Oscillating Spindle and Belt Sander
Stock No: 98425
Part No: OSBS450D
1.2 REVISIONS:
Date first published March 2021.
As our user manuals are continually updated, users should make
sure that they use the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Help Line: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
Warning! – Information that draws attention to the risk of injury or death.
Important – Information that draws attention to the risk of damage to the product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other form or
means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1. TITLE PAGE
– 3 –
2.1 TABLE OF CONTENTS
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION .......................................................................................................... 2
1.2 REVISIONS .................................................................................................................. 2
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT 2 .........................................
1.4 COPYRIGHT © NOTICE 2 ..............................................................................................
2. CONTENTS
2.1 TABLE OF CONTENTS 3 ...............................................................................................
3. WARRANTY
3.1 WARRANTY ................................................................................................................. 4
4. INTRODUCTION
4.1 SCOPE ......................................................................................................................... 5
4.2 SPECIFICATION .......................................................................................................... 5
4.3 HANDLING AND STORAGE 5 ........................................................................................
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE 6 ...............................
5.2 OSCILLATING SPINDLE & BELT SANDER SAFETY 7-8 ............................................
5.3 ADDITIONAL SAFETY INSTRUCTIONS FOR SANDERS 8-9 .......................................
5.4 RESIDUAL RISK 9 ..........................................................................................................
5.5 CONNECTION TO THE POWER SUPPLY.................................................................. 9
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ....................................................................................................... 10
7. UNPACKING AND CHECKING
7.1 PACKAGING .............................................................................................................. 11
7.2 WHAT’S IN THE BOX ................................................................................................ 11
8.
PREPARING THE SANDER
8.1 TOOL HOLDERS 12 .......................................................................................................
8.2 BOBBIN STORAGE 12 ...................................................................................................
8.3 INSERTS STORAGE 12 .................................................................................................
8.4 NO-VOLT ON/OFF SWITCH 12 ......................................................................................
8.5 BENCH MOUNTING 12 .................................................................................................
9.
OPERATION AND USE
9.1 DUST EXTRACTION 13 .................................................................................................
9.2 BELT SANDER MODE 13 ..............................................................................................
9.3 TRACKING ADJUSTMENT ....................................................................................... 14
9.4 SPINDLE SANDER MODE 15 .......................................................................................
9.5 TABLE TILTING ......................................................................................................... 15
10. MAINTENANCE AND TROUBLESHOOTING
10.1 MAINTENANCE ......................................................................................................... 16
10.2 CLEANING ............................................................................................................... 16
10.3 BRUSH REPLACEMENT 16 ..........................................................................................
10.4 TROUBLESHOOTING .............................................................................................. 17
11. EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS 18 ..................................................................................
12. DISPOSAL
12.1 DISPOSAL ................................................................................................................. 19
DECLARATION OF CONFORMITY.............................................................................. ENCLOSED
Product specificaties
| Merk: | Draper |
| Categorie: | Schuurmachine |
| Model: | 98425 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 98425 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schuurmachine Draper
4 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
31 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
Handleiding Schuurmachine
- Schuurmachine Gastroback
- Schuurmachine Alpha Tools
- Schuurmachine Proviel
- Schuurmachine Meister Craft
- Schuurmachine Rupes
- Schuurmachine Protool
- Schuurmachine FIXIT
- Schuurmachine Topcraft
- Schuurmachine Ryobi
- Schuurmachine Bort
- Schuurmachine Hikoki
- Schuurmachine Stalco
- Schuurmachine Dremel
- Schuurmachine Skil
- Schuurmachine Makita
Nieuwste handleidingen voor Schuurmachine
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
23 December 2024
10 December 2024
8 December 2024
5 December 2024
5 December 2024
4 December 2024