Draper 64535 Handleiding
Draper
Niet gecategoriseerd
64535
Bekijk gratis de handleiding van Draper 64535 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Draper 64535 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
MICROMETER ADJUSTMENT
TORQUE
WRENCHES
64534 & 64535
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
1.1 INTRODUCTION:
USER MANUAL FOR: Micrometer Adjustment Torque Wrenches
Stock No: 64534 & 64535
Part No: 3004A/BK & 3001A/BK
1.2 REVISIONS:
Date first published December 2020.
Revision date: June 2024
As our user manuals are continually updated, users should make
sure that they use the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. UK
Website: drapertools.com
Product Help Line: +44 (0) 23 8049 4344
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
Warning! – Information that draws attention to the risk of injury or death.
Important – Information that draws attention to the risk of damage to the product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other form or
means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1. TITLE PAGE
2. WARRANTY
– 2 –
2.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or contact:
Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: +44 (0) 8049 4333 or Product Help Line +44 (0) 23 8049 4344.
A proof of purchase be provided with the tool.must
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering labour is 12 months from
the date of purchase. This warranty does not apply to any consumable parts, any type of battery or
normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe
handling, alterations, accidents, or repairs attempted or made by any personnel other than the
authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
4.1 GENERAL SAFETY INSTRUCTIONS
WARNING! Never use the torque wrench to undo bolts, nuts or fasteners, as this will damage the
ratchet and the calibrated setting.
- Always refer to manufacturer’s literature, workshop manual or Haynes manual for
recommended TORQUE SETTINGS and if applicable the sequence for tightening and final
torquing of fasteners.
IMPORTANT: The torque wrenches detailed in this instruction leaflet are for right hand torquing
only. They are not designed for left hand thread use.
- This torque wrench is designed for general purpose use.
- If critical torque measurement is required, it is recommended the torque wrench is
independently calibrated before first use and that the user puts in place a re-calibration
schedule appropriate for the application.
3. INTRODUCTION
4. SAFETY INSTRUCTIONS
3.1 SCOPE
This torque wrench is used to apply a specific torque to a fastener such as a nut or bolt.
3.2 SPECIFICATION
Stock No. 64534 64535 .................................................................... .................................................
Part no. 3004A/BK 3001A/BK ................................................................... ........................................
Square drive size 3⁄8" ......................................................... ................................. 1⁄2"Marked range
10-80Nm/ 30-210Nm/ ....................................................................... .......................................
88.5-708lb-in 22.1-154.9lb-ft ..................................................... .................................
Overall length 275mm 465mm ........................................................... ..............................................
Whilst every effort has been made to ensure that the accuracy of information given in this manual
is correct at time of going to print, the Draper Tools policy of continuous improvement determines
the right to change specification without notice.
3.3 CONVERSION CHART
– 3 –
1mN/m
1cN/m
1N/m
1daN/m
1cm/kg
1m/kg
lin-oz
lin-lb
lft-lb
mN/m
millinewton-
metre
1
10
1000
10000
98
9810
7.06
112.9
1355
cN/m
centinewton-
metre
0.1
1
100
1000
9.8
981
0.706
11.29
35
N/m
newton-
metre
0.001
0.01
1
10
0.098
9.81
0.00706
0.1129
1.355
daN/m
decanewton-
metre
0.0001
0.001
0.1
1
0.0098
0.98
0.0007
0.01129
0.1135
cm/kg
centimetre-
kg
0.0102
0.102
10.2
102
1
100
0.072
1.152
13.8
m/kg
metre-
kg
0.000102
0.00102
0.102
1.02
0.01
1
0.00072
0.0115
0.138
in-oz
inch-
ounce
0.1416
1.416
141.6
1416
13.9
1390
1
16
192
in-lb
inch-
pound
0.00885
0.0885
8.85
88.5
0.868
86.8
0.063
1
12
ft-lb
foot-
pound
0.000738
0.00738
0.738
7.38
0.0723
7.23
0.0052
0.083
1
Product specificaties
| Merk: | Draper |
| Categorie: | Niet gecategoriseerd |
| Model: | 64535 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 64535 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Draper
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
5 Juni 2025
5 Juni 2025
5 Juni 2025
4 Juni 2025
Handleiding Niet gecategoriseerd
- ATAG
- ErgoAV
- Juki
- Metrix
- Audio Pro
- Jysk
- ESUN
- SoundTube
- Nextorage
- IOptron
- Gasmate
- NordicTrack
- PowerWalker
- Elica
- Galanz
Nieuwste handleidingen voor Niet gecategoriseerd
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025