Draper 13198 Handleiding
Draper
Niet gecategoriseerd
13198
Bekijk gratis de handleiding van Draper 13198 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.9 sterren uit 7.5 reviews. Heb je een vraag over Draper 13198 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
13198
EN
Original Instructions
Version 3
Augist 2024
UNDERBODY
COATING
GUN
Version 1: August 2024 – First release
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
1. Intended Use
Part of our core range, this product is suitable for
enthusiasts and tradespersons alike. This vehicle
underbody coating gun can be used on the vehicle
chassis for rustproong and is suitable for various kinds
of primer and sub coat paints. It accepts most types of 1L
coating tins and it is supplied with a ¼” BSP adaptor.
2. Specication
Stock No: 13198
Part No: DAT-GUCG
Air inlet: 1/4” BSP
Rated air pressure: 30~58 psi
Maximum air pressure: 116 psi
Air consumption: 270 L/min
Recommended air pressure: 2 – 4 bar
Nett weight: 290g
4. Warranty
12 months Warranty -
Visit for full details.drapertools.com/warranty
5. HealthandSafety
Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result in
injury or damage to the user or the product.
Compressed air is a source of considerable energy. When
handling products dealing with compressed air, the
following precautions must be taken to prevent
accidents.
5.1GeneralSafetyInstructionsFor
CompressedAir
• Ensure that compressed air is not blocked or in
contact with any part of your body.
• Before connecting any pneumatic equipment to the
compressed air supply, all mounted ttings, piping
assemblies and electrical connections should be
checked for security. All plastic plugs in the
equipment used for protection during shipping should
be removed.
• No piping alterations, removal of ttings, repairing of
equipment etc. Should be attempted with air supplies
connected. Air and electrical supplies must be
disconnected before beginning any adjustment,
maintenance or dismantling of equipment.
• The maximum allowable operating pressures,
temperature, ows etc. must be strictly observed.
Failure to do so might result in catastrophic failure of
equipment, and result in serious personal injury and /
or death. Refer to individual catalogues for this
information, and any other operating or application
limitations.
5.2 CompressedAirSafetyfor
PneumaticEquipment
WARNING!
Compatibility of pneumatic equipment
Ensuring the compatibility of the procured FRL
equipment is the responsibility of the person who
designs the Pneumatic system and/ or System
specications. This should be based on specications or
after analysis and / or tests to meet specic
requirements.
Repair & Maintenance
Assembly, handling, or repair of pneumatic systems
should be performed by only trained and experienced
operators.
Safety First
Do not service machinery / equipment or attempt to
remove any component until safety Is conrmed.
− Inspection and maintenance of machinery /
equipment should only be performed after
conrmation that both compressed air and
electrical supply have been positively
disconnected and all residual compressed air in
– 2 –
the system has been completely exhausted to the
atmosphere.
Contact the manufacturer if equipment is to be used in
any of the following conditions:
− Equipment is to be used in conditions beyond the
given specications, or if equipment is to be used
outdoors.
− Equipment is to be used in conjunction with
atomic energy, railroad, air navigation,
automobiles or related vehicles, medical
equipment or safety equipment.
− In applications that adversely eect humans,
animals, or property requiring special safety
analysis.
5.3 ProductSelection
Warning! Standard Filters, Regulators,
Lubricators and Filter- Regulator Combination
units should be used in accordance with the
specications mentioned in the specication
sheets. While installing and using this
equipment, please also follow the respective
specication & instruction manual available for
each product.
Wherever this symbol is shown, it indicates
CAUTION! and/or WARNING!
It indicates that operator error can lead to damage and
malfunctioning of the pneumatic equipment and can
lead to serious personal injury or loss of life.
Air Filter and Lubricator
Standard Filters and Lubricators incorporate
polycarbonate bowls and / or observation windows. Do
not use lters & lubricators in an environment that will
expose the above components to synthetic uids,
organic solvents, corrosive chemicals, cutting lubricants,
thread sealant or similar materials.
• Make sure that the condensate in periodically drained
when using manual drain valves on Filters.
Regulator
a. Safety devices shall be placed to prevent
secondary (output) pressure from rising past the
set pressure.
This will ensure that damage to the components on
the secondary side will be minimized in the event
of a malfunction.
b. In a standard regulator, when the supply pressure
is removed or disconnected, either of the following
may happen:
1. The residual pressure will remain on the
secondary side of the regulator.
2. The pressure on the secondary side of the
regulator will exhaust.
The designer should add components to the circuit
to compensate for any of the above conditions.
c. Regulator operation may be aected when used in
Balanced or Secondary sealed circuits. Please
consult the manufacturer regarding these
applications.
Lubricators
Ensure proper function of the Lubricator. Minimum
airow rate should be ensured for eective lubrication.
5.4RecommendedAirSupplySetUp
Do not install
quick coupling here
To your
air tool
Nipple
Leader hose
Recoil hose
Oiler
Drain daily
Regulator
Water separation
Air supply
Nipple
Quick coupler
6. TECHNICALDESCRIPTION
(1) Air nozzle
(2) Handle
(3) ¼” BSP air inlet
(4) Trigger
(5) Tube
(6) ¼” BSP adaptor
– 3 –
(1)
(5)
(4)
(3)
(2)
(6)
Product specificaties
| Merk: | Draper |
| Categorie: | Niet gecategoriseerd |
| Model: | 13198 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 13198 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Draper
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
5 Juni 2025
5 Juni 2025
5 Juni 2025
4 Juni 2025
Handleiding Niet gecategoriseerd
- Key Digital
- Inno-Hit
- Televés
- AMX
- Baseus
- Hamlet
- Rolly Toys
- Winter Modular
- SetonixSynth
- Sky-Watcher
- Bright Spark
- Aarke
- Wurth
- Rothenberger
- AmpliVox
Nieuwste handleidingen voor Niet gecategoriseerd
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025