DPA d:fine CORE 4066 Handleiding
Bekijk gratis de handleiding van DPA d:fine CORE 4066 (7 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 1.5 reviews. Heb je een vraag over DPA d:fine CORE 4066 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7
w w w . d p a m i c r o p h o n e s . c o m
Headset Microphones Manual
d:fine
TM
Omnidirectional
d:fine
TM
Directional
d:fine
TM
4065
d:fine
TM
4066
d:fine
TM
4067
d:fine
TM
4088
d:fine
TM
66
d:fine
TM
88
w w w . d p a m i c r o p h o n e s . c o m / d f i n e
Omnidirectional characteristics
• The microphone is sensitive to sound from all directions.
• The sound remains more or less the same regardless of
the distance between the sound source and the microphone.
• The positioning of microphones with omnidirectional
characteristics is less critical than with directional.
• An omnidirectional microphone is generally not very
sensitive to wind, breathing and handling noises.
Directional characteristics
• Rejects background noise and creates higher separation.
• The microphone is most sensitive to sound on the side of the chevron.
• The positioning of mics with directional characteristics is essential
as the low frequency level will change according to the distance to the mouth.
Choose a distance which yields the desired amount of bass.
• Care should be taken to protect against wind and pop noise e.g. by using
a windsceen.
Introduction
All the d:fine
TM
Headset Microphones provide a uniquely natural and open sound.
Ultra-lightweight and adjustable, d:fine
TM
Headset Mics ensure a secure and
comfortable fit in live performance environments. To ensure optimal performance
of your d:fine Headset Mic, please follow the simple instructions below.
Placement of microphone
For discreet placement, you can bend the microphone boom slightly so that the cap-
sule is as close to the cheek as possible. Do not hold the capsule while bending; bend
the wire boom, making a smooth
curve with your thumb to best fit
the profile of the face.
Mount a directional mic 2 – 3
cm (1 in) from the corner of the
mouth to ensure optimal sound
quality compared to an omnidi
-
rectional mic that can be placed
further away from the mouth.
Adjusting the d:fine
TM
4065
4065 is pre-formed but may require adjustment in order to get a tight, fixed position to the back of
the neck. Adjust the steel tube carefully at the curves.
A protection grid is mounted over the microphone head. If clogged with dirt or make-up,
gently remove it and clean it with distilled water.
Adjusting the d:fine
TM
4066, 4067, and 4088
The size of the headset mount can easily be adjusted. Change the standard bend by carefully expand-
ing the distance between the earhooks.
To change sides, simply click the boom out of the clips and switch it over to the other side.
The remaining two clips are not used. The soft cable must not be attached into the clips.
Product specificaties
| Merk: | DPA |
| Categorie: | Microfoon |
| Model: | d:fine CORE 4066 |
Heb je hulp nodig?
Als je hulp nodig hebt met DPA d:fine CORE 4066 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Microfoon DPA
13 April 2025
11 April 2025
8 December 2024
23 Juni 2024
23 Juni 2024
21 Juni 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
7 December 2023
Handleiding Microfoon
- Omnitronic
- Fluid
- Hähnel
- AMT
- Power Dynamics
- Pyle
- ANT
- Artsound
- Solid State Logic
- Mojave
- Chandler
- Lewitt
- Samson
- Logitech
- Krom
Nieuwste handleidingen voor Microfoon
16 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025