Dormakaba Keyscan NETCOM Handleiding

Dormakaba Niet gecategoriseerd Keyscan NETCOM

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba Keyscan NETCOM (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Keyscan NETCOM

Keyscan NETCOM series

TCP/IP modules

Keyscan NETCOM TCP/IP communication modules are a

fast and easy way to connect your Keyscan Access Control

system to your LAN/WAN network.

Keyscan NETCOM2P is a plug on TCP/IP module that

connects directly to a Keyscan access control panel or an

off-board communication module. It allows you to establish

access control system communication along an existing

LAN/WAN network.

NETCOM2P & CIM

Keyscan NETCOM2P works seamlessly with Keyscan CIM

(Communication Interlink Module). The NETCOM2P plugs

directly onto Keyscan’s CIM communication module to

establish network communication to the server among

multiple ACUs along a CAN Bus network.

Where higher security is required for communication, the

NETCOM6P employs an AES Rijndael (NIST approved)

encryption algorithm. A user-defined encryption key, which

can be can be 128 bits, 192 bits, or 256 bits, minimizes the

possibility of an attacker breaching communication.

Both NETCOM2P and NETCOM6P include a Keyscan NE

COM Program Tool utility for custom installation

programing so either converter adapts to any TCP/IP

network structure for access control system communication.

Also available as an off-board module, NETCOM2 for

legacy panels and select integrations

NETCOM2P-6P NETCOM2 off-board

Specifications

dormakaba Canada Inc.

901 Burns St., E.,

Whitby, Ontario

Canada L1N 0E6

1 888 539 7226

www.dormakaba.us KKT2002 2018-05

without notice or obligation. *Distances may vary depending on installation criteria and known wireless obstacles and interference. Printed in Canada.

Input Power through ACU 140 mA, + ACU 130 mA = 270 mA

Input Power through CIM 140 mA + CIM 150 mA = 290 mA

Network Interface RJ45 10/100 Ethernet

Dimensions NETCOM2P/6P = 1.625” x 1.9375” (41mm x 49mm)

NETCOM6P NETCOM2 = 3.031” x 3.896” (77mm x 99mm)