Dormakaba C100 Handleiding

Dormakaba Niet gecategoriseerd C100

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba C100 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

Installation Instructions: C100 and C200 1DT and C100 2DT Dummy Trim Assemblies

DORMA-C100/C200 series 10-2021 1T93465_A www.dormakaba.us

Installation Instructions

C DT and DT dummy trim assemblies

 Technical specifications

 Installation instructions

. Tools recommended

Table 

Fig.

Fig.

Fig.

. Overview

Liner

Rose

Lever

Sleeve

Liner

Rose

Lever

Sleeve

.. Disengage the lever by

pushing the pointed end

of the spanner wrench

into the hole on the lever.

.. Slide the lever off.

.. Unscrew the rose from

the sleeve.

.. Using the spanner wrench,

pry the rose from the liner.

.. Draw a height line across the face of the door. The

suggested height is -/" ( mm) from the

finished floor.

.. Place the template on the door.

.. Mark and drill the two holes.

.. Fasten the sleeve onto the door with the screws provided.

.. Thread on the liner until it seats against the door.

.. Install the outside trim assembly with studs on the outside

of the door.

.. Align the inside sleeve and secure using the screws provided.

.. Thread on the inside liner until it seats against the door.

..

Press the rose over the liner until it fits flush against the door.

.. Press on the lever.

..

Press on the rose over the liner assembly.

.. Press on the inside lever.

. Disassemble dummy trim.

. Mark and drill holes.

. Install dummy trim.

NOTE: For C double dummy trim, disassemble the

inside trim assembly only. There is no need to disassemble

the outside trim.

NOTE: For pairs of doors, install the dummy trim at the

same height and backset distance from the edge of the

door to the center of the lock trim on both the active and

inactive doors.

NOTE: Slide the liner onto the sleeve in the opposite way from

the normal installation.

NOTE: Slide the liner onto the sleeve in the opposite way from

the normal installation.

NOTE: For single dummy trim, drill two pilot holes halfway

through the door with a /" (1.5 mm) drill bit. For double

dummy trim, drill two holes completely through the door

with a /" (7 mm) drill bit.

Fig.

Fig.

Fig.

Outsid assemblye

with studs

ever

Machine scre

Insid sleevee

Insid linere

Outsid assemblye

with studs

ever

Machine scre

Insid sleevee

Insid linere

For C double dummy trim

For C single dummy trim

C double dummy trimC single dummy trim

Spa

n rne

wr chen

Rose

Spa nen r

wrench

Hole

(n )ot shown

Lever

# & # Phillips screwdriver Spanner wrench

Tape measure Lever keeper tool

Pencil Drill bit: /" (1.5 mm) drill bi

Dril

Installation Instructions: C100 and C200 1DT and C100 2DT Dummy Trim Assemblies

DORMA-C100/C200 series 10-2021 2T93465_A www.dormakaba.us

For online instructions visit:

https://dhwsupport.dormakaba.com/hc/en-us

For a wssistance or arranty information:

Call 1-800-392-5209 or isitv

https://dhwsupport.dormakaba.com/hc/en-us

Installation Instructions

C DT dummy trim assemblies

1 Technical specifications

2 Installation instructions

. Tools recommended

Table 

# & # Phillips screwdriver Spanner wrench

Tape measure Lever keeper tool

Fig.

Fig.

. Overview

.. Draw a height line across the face of the door. The

suggested height is -/" ( mm) from the

finished floor.

.. Place the template on the door.

.. Mark the top and bottom holes.

.. Drill the two holes.

.. Disengage the lever by pushing the lever keeper tool

into the hole on the lever.

.. Slide the lever off of the sleeve.

.. Fasten the liner and sleeve assembly onto the door with the

screws provided.

.. Press the rose over the liner until it fits flush against the

door.

.. Press on the lever.

. Disassemble dummy trim.

. Mark and drill holes.

. Install dummy trim.

NOTE: For pairs of doors, install the dummy trim at the

same height and backset distance from the edge of the

door to the center of the lock trim on both the active and

inactive doors.

NOTE: C200 dummy trim is available only as single dummy

trim. For applications where C200 dummy trim is needed on

both sides of the door, use two single dummy trim units.

NOTE: For single dummy trim, drill pilot holes using a 1/16"

( 1.5 mm) drill bit.

Fig.

Lever

keep

t loo

Lever

keep

t loo

Pencil Drill bit: /" (1.5 mm) drill bi

Dril

C200 dummy trim

C200 dummy trim C200 single dummy trim

Liner an eeved sl

assembly

Rose

Lever

Product specificaties

Merk:	Dormakaba
Categorie:	Niet gecategoriseerd
Model:	C100

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba C100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023

Dormakaba RCI S2500A Handleiding

9 Juli 2023

Dormakaba EAC Handleiding

9 Juli 2023

Dormakaba CLM9000 Handleiding

9 Juli 2023

Dormakaba DKX Type III Handleiding

9 Juli 2023

Dormakaba 9800 Handleiding

9 Juli 2023

Dormakaba HSW-GP Handleiding

9 Juli 2023

Dormakaba DKX-10 Handleiding

9 Juli 2023

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024