Doepfer A-190-4 Handleiding
Pagina's 22 Niet gecategoriseerd
Bekijk de handleiding van Doepfer A-190-4 gratis online of download de PDF. 2 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
DOEPFERSystem A-100USB/Midi-to-CV/Gate A-190-4
1
1. Introduction
The A-190-4
is a MIDI-
CV/SYNC Interface, capable to control any A-100
Module via MIDI that provides CV and gate/trigger input
sockets.
The A-190-4 has two Digital-to-Analogue converters
(DAC for short), which put out control voltages from -3V
to +10V (CV1) and 0V to +10V (CV2), so that you can
control not just pitch, but also another voltage-controllable
parameter of your synthesizer.
DAC1 is ‘hard-wired’ to receive MIDI note messages and
convert them into control voltages available at CV output
socket CV1. The DAC has 12-bit resolution, which gives
excellent tuning resolution (in steps of 1/4096th). Usually,
DAC1 will be used to control VCO pitch.
DAC2 can be assigned to a MIDI controller. It has also
12-bit resolution in order to allow smooth parameter
changes. Its output is available at CV2 socket, and can
be used for voltage control of any suitable module (eg.
VCF, VCA, etc.).
The A-190-4 also has a clock output, controlled by MIDI
clock. Incomming MIDI clock can be divided down to
Before installing the A-190-4 please
read the importand note on page 5!
Product specificaties
| Merk: | Doepfer |
| Categorie: | Niet gecategoriseerd |
| Model: | A-190-4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Doepfer A-190-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Doepfer
Doepfer A-99 Handleiding Doepfer A-101-2 Handleiding Doepfer A-145 Handleiding Doepfer A-135-2v Handleiding Doepfer A-134 Handleiding Doepfer A-196 Handleiding Doepfer Dark Link Handleiding Doepfer A-100 Handleiding