DOD Mini Volume Pedal Handleiding

Bekijk gratis de handleiding van DOD Mini Volume Pedal (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over DOD Mini Volume Pedal of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PN: 5091808-00-B

dod.com

Mini Volume Pedal

Owner’s Manual

Thanks for purchasing the DOD® Mini Volume Pedal, the miniature passive volume pedal that gives

you a full range of volume control, without robbing you of valuable pedalboard space.

Features:

• Small form factor occupies minimal pedalboard space

• Long-throw treadle for full range of control

• High-quality, high-cycle 500kΩ potentiometer for smooth volume adjustments

• Built-in treble bleed circuit prevents loss of treble at lower volume settings

• Removable rubber feet for pedalboard mounting

• 1/4” TS input and output jacks

• Skid-free treadle pad

• Rugged construction

Setup:

1. Turn your amp o, then connect your cables (see connection diagram below).

2. Turn your amp volume down, push the DOD Mini Volume Pedal’s treadle toe down, then turn

your amp on.

3. Slowly raise your amp volume until the desired level is reached.

Use only unbalanced TS cables.

Out

Eect Pedals

In

In

In

Out

Out

****IMPORTANT USAGE NOTE****

The two hex screws on the bottom of the pedal are part of a spring-loaded adjustment

mechanism. If over time you experience slop, loosen these screws slightly and then re-tighten.

This will cause the main engagement gear to re-tighten against the treadle gear.

DO NOT remove these screws or operate the treadle while the screws are loosened. This can

cause the gears to become misaligned and cause the pedal to malfunction. There are no user-

adjustable components inside the pedal. Under no circumstances should the pedal be

opened up.

Product specificaties