Digitus DS-55500 Handleiding

Digitus AV extender DS-55500

Bekijk gratis de handleiding van Digitus DS-55500 (6 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 60 mensen en kreeg gemiddeld 4.8 sterren uit 30.5 reviews. Heb je een vraag over Digitus DS-55500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/6
4K HDMI Extender, HDBaseT
Manual
DS-55500
Important safety notice
Please read below safety instructions carefully before installation and operation:
Please pay attention to all the warnings and hints on this device.
Do not expose this unit to rain, moisture and liquid.
Do not put any stuff into the device.
Do not repair or open this device without professional people's guidance.
Make sure good ventilation openings to avoid product overheating damage.
Shut off power and make sure environment is safe before installation.
Do not plug-in/out the connected cables when it is in using.
Make sure the specification matched if using 3rd party DC adapters.
1. Introduction
This HDBaseT single network cable extender transmits HDMI signal up to
70 meters over cat6 fluently and clearly. It is lossless in signal and supports 3D,
24 bits deep color, 4Kx2K, CEC and HDCP.
2. Features
Apply HDBaseT extend technology
Uncompressed HDMI video signal
Support full HD 1080p@60Hz, 3D, 4Kx2K
Extend 1080p signal over cat6a up to 70 meters
Support bi-directional IR pass back
Support HDCP, CEC, 24 deep color
Support uncompressed LPCM audio and compressed DTS-HD, Dolby True HD
can be powered by network cable. It only needs to input 12V power for either
transmitter or receiver for normal working
3. Package contents
HDMI to HDBaseT TX, sender x 1
HDBaseT to HDMI RX, receiver x 1
DC12V/2A x 1
IR blaster extension cable x 1
IR receiver extension cable x 1
User manual x 1
Mounting bracket x 1
4. Installation Requirements
HDMI source devices:
With HDMI OUTPUT interface, DVD, PS3, STB, PC etc.
Display devices:
With HDMI INPUT port, SDTV, HDTV, projector
Network cables:
UTP/STP Cat5e/Cat6/Cat6A/Cat7 network cables are following the standard of
IEEE-568B.
5. Panel description
5.1. HDMI to HDBaseT TX Sender
HDMI IN: HDMI signal input to connect with HDMI source device.
IR IN: IR signal input to connect with IR receiver extension cable.
IR OUT: IR signal output to connect with IR blaster extension cable.
DC12V: Power input
HDBT OUT: HDBaseT signal output
5.2. HDBaseT to HDMI RX Receiver
DC12V: Power input
HDBT IN: HDBaseT signal input
HDMI OUT: HDMI signal output to connect with HDMI display device.
IR IN: IR signal input to connect with IR receiver extension cable.
IR OUT: IR signal output to connect with IR blaster extension cable.


Product specificaties

Merk: Digitus
Categorie: AV extender
Model: DS-55500
Kleur van het product: Zwart
Gewicht verpakking: 896 g
Breedte verpakking: 149 mm
Diepte verpakking: 199 mm
Soort: AV-zender & ontvanger
Gebruikershandleiding: Ja
LED-indicatoren: Ja
Montage gereedschap: Ja
Ondersteund audioformaat: LPCM
Ondersteunde video-modi: 480i,480p,576i,576p,720p,1080i,1080p,2160p
Maximum resolutie: 4096 x 2160 Pixels
Land van herkomst: China
Code UK-handelstarief: 85176200
HDCP: Ja
Maximale refresh snelheid: 60 Hz
Aansluiting voor netstroomadapter: Ja
3D: Ja
Materiaal: Metaal
Remote (IR) ingang: 1
Output current: 2 A
Remote (IR) uitgang: 1
Power over Ethernet (PoE): Nee
HDMI in: 1
Afmetingen (B x D x H): 66.5 x 98.5 x 23 mm
Aantal HDMI-uitgangen: 1
HDBaseT-poort: Ja
Maximaal bereik: 40 m
Stroomverbruik (typisch): 8 W
Verpakkingsvolume: 2372.08 cm³
Ondersteundende kabel types: Cat5e,Cat6,Cat6a,Cat7

Heb je hulp nodig?

Als je hulp nodig hebt met Digitus DS-55500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding AV extender Digitus

Handleiding AV extender

Nieuwste handleidingen voor AV extender