Digitus DN-651107 Handleiding

Digitus Schakelaar DN-651107

Bekijk gratis de handleiding van Digitus DN-651107 (7 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 65 mensen en kreeg gemiddeld 4.3 sterren uit 33 reviews. Heb je een vraag over Digitus DN-651107 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/7

Industrial 5-Port Gigabit Switch

User Manual - DN-651107

Introduction

This hardened industrial 5 port Gigabit Ethernet Switch is equipped with

wide range VAC and VDC power input. It is suitable for heavy usage

environments such as hazardous environments or central control areas

where a reliable device is critical. It is an ideal solution for Industrial

Automation, IP surveillance, traffic monitoring and a wide range of

applications. It has been rigorously tested for your security, transportation

and telco applications.

Features

 Hardened design Aluminum enclosure

103.5 x 32 x 81.5 mm (L x W x D)

 Supports 18-36VAC/12-60VDC

 Surge protection diodes on power input.

 ESD protection diodes on RJ-45 port

 Provides increased Noise Immunity

 Extended environment specification -40°C to 75°C

Installation package

This unit can be din-rail mounted or wall-mounted. Din-rail brackets and

wall-mounted brackets are included.

Package Content:

1x Main unit

1x User Manual

2x Wall Mount Bracket

1x DIN Rail Bracket

1x 4 pin Terminal Block

4x Screws

Wall mount

bracket x 2 Philips Head Screw x 4

Din Rail Bracket x 1

4 pin Terminal Block x 1

Power connection

This unit provides a 4 pin terminal block. It can be operated using 12-

56VDC/18-36VAC power source. Always make sure your input voltage is

within this supported voltage range.

To connect power: This unit supports two power inputs. Follow the printed

polarity for +V1-, +V2- and ground. Connect positive wires to V+, connect

negative wires to V-, and connect a neutral wire to the ground screw.

+V1- is for power input one connection.

+V2- is for power input two connection.

Power connecting procedure:

 STEP 1

–

Take out 4 pin terminal block located in the included

mounting kit package.

 STEP 2

–

Connect power wires to +V1- or +V2- with

corresponding polarity. Connect the grounding wire

to the ground screw.

 STEP 3

–

Plug into terminal block socket shown above.

Polarity needs to match V+ and V-.

WARNING:

Always SHUT OFF power source to connect power wire.

WARNING:

Any exceeded input voltage will not make this unit function and may

damage this unit.

+V1- +V2-

Product specificaties

Merk:	Digitus
Categorie:	Schakelaar
Model:	DN-651107
Kleur van het product:	Zwart
Gewicht verpakking:	462.5 g
Breedte verpakking:	65 mm
Diepte verpakking:	165 mm
Materiaal behuizing:	Metaal
Land van herkomst:	Taiwan
Code UK-handelstarief:	85176200
DC voltage input:	18 - 36 V
Netwerkstandaard:	IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x
Stroomspanning bescherming:	Over voltage,Reverse polarity,Short circuit
Geschikt voor buitengebruik:	Nee
MAC adres filtering:	Ja
Redundante voeding:	Ja
Ethernet interface type:	Gigabit Ethernet
Mean time between failures (MTBF):	500000 uur
Ophangsysteem voor aan de muur:	Ja
VLAN=ondersteuning:	Nee
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Nee
Switchingcapaciteit:	10 Gbit/s
MAC-adrestabel:	8000 entries
Datastroombeheer:	Ja
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	5
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Full duplex:	Ja
Stroomverbruik (typisch):	2.76 W
Bedrijfstemperatuur (T-T):	-40 - 85 °C
Code geharmoniseerd systeem (HS):	85176990
Verpakkingsvolume:	2305.88 cm³
DIN rail bevestiging:	Ja
Store-and-forward:	Ja
Vandaalbestendig:	Nee