Digitus DN-3P16-050 Handleiding

Digitus Autolader DN-3P16-050

Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus DN-3P16-050 (20 pagina's) in de categorie Autolader. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
3-Phase - Wall Box 11KW
with 5m standard charger cable
Quick Installation Guide
DN-3 - – P16 050 Rev 1.0
2
Please read this manual carefully before installation and use,
otherwise, it may interfere with the
normal use of the equipment
and even risk causing personal injury.
1. Safety and Points for Attention
1.1. Installation
 Installation must be carried out by personnel with
professional qualification, otherwise there is a risk of
electric shock.
 It shall be installed in the place without violent vibration
and impact and placed vertically to facilitate ventilation.
It shall be installed on noncombustible materials such
as metal, or there is a risk of fire.
 Do not drop any foreign objects, especially metal
objects, into the inside of the charging station or there
is a risk of fire. The lead nose of the charging station
must be securely attached or there is a risk of damaging
the equipment.
 The power supply input cable should have at least
5G2.5mm² (minimum) copper cable while it is
recommended 5G4mm² copper input cable.
1.2. Maintenance
 It is recommended that routine safety inspection visits
to charging station be conducted at least once a week.
 Please do not attempt to disassemble, repair, or modify
the charger by yourself. If there is a need for
maintenance or modification, please contact certified
3
Electrician/Installers. Improper operation may cause
damage to the equipment.
 Do not put inflammable, explosive or combustible
materials, chemicals, combustible steam and other
dangerous goods near the charging station, otherwise
there is a risk of fire.
 Please keep the charging adapter clean and dry and
wipe with a clean, dry cloth if soiled. Do not touch the
charging station with your hand when charged.
1.3. Operation
 Strictly forbidden for Children or persons of restricted
capacity to approach the charging station to avoid
injury.
 Forced charging is strictly forbidden when the electric
vehicle or charging station fails.
 Electric vehicle can only be charged with the engine is
off and stationary. Do not charge in rainy and
thunderous weather.
 It is strictly prohibited to use the charging station when
the charging adapter or charging cables are defective,
cracked, worn, broken or the charging cables is
exposed. If you find any, please contact the supplier in
time.
 In case of rain or thunder, please charge with care.
 DO not use the device in extreme temperatures outside
the normal operating range at - .30°C to 55°C


Product specificaties

Merk: Digitus
Categorie: Autolader
Model: DN-3P16-050
Ingebouwd display: Nee
Snoerlengte: 5 m
Internationale veiligheidscode (IP): IP55
Aantal per verpakking: 1 stuk(s)
Beschermkap: Ja
Kleur kabel: Zwart
Soort kabel: 5G6 mm²+2x0.5 mm²
Operating voltage: 415 V
Bedrijfstemperatuur (T-T): 30 - 50 °C
Aantal fases: 3
Aansluiting 1: Type 2
Connector 1 vormfactor: Recht
Diameter van de kabel: 16.8 mm
Maximale bedrijfsstroom (driefasig): 16 A
Maximaal bedrijfsvermogen (driefasig): 11 kW

Heb je hulp nodig?

Als je hulp nodig hebt met Digitus DN-3P16-050 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden