Denver DCW-340 Handleiding

Bekijk gratis de handleiding van Denver DCW-340 (1 pagina’s), behorend tot de categorie Drone. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Denver DCW-340 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DCW-340

denver.eu

06/11/2025

Charging

Connect one side of the USB connector with the battery, and the other side into any

USB port of computer or a smartphone charger (not included).

This product does not support harmonized charging.

ENG 3

ENG 5

ENG 6ENG 4

ENG 1ENG 2

Notice:

1 Instructions

Please read the user handbook carefully and then keep it in a safe place for future

consultation and maintenance.

1.1 Important Notice

(1) This product is not a toy, it's a piece of complicated equipment which integrated with

professional knowledge by mechanic, electric, air mechanics, high-frequency transmitter

and so on, so it should be installed correctly and adjusted to avoid any accidents.

The owner must always operate in a safe manner, if improper operation that caused

human injured or property damage, then we DENVER A/S accept no liability for any safety

duties from operation. As we have no control over the way they maintained, used and

operated.

(2) This product is not suitable for users under 14 years of age.

(3) The use of the drone may be prohibited in some areas like train stations, airports,

aircrafts, inhabited areas etc. You should check with the authorities whether the use of

the drone is permitted in some public or private areas. Always use the drone bearing in

mind not to breach people's privacy. We exclude liability for any wrong use of the drone.

(4) We DENVER accept no liability for any safety duties or fines arising from operation,

usage or miscontrol after the sale of products. Warranty does not cover if drone crashes

and get damaged.

1.2 Safety Precautions

Keep away from crowd when flying, since drone flight is a high-risk hobby. Misassembled

or broken main frame or defective electronic equipment or unskilled operation may cause

accidents of machine damaged or injured. Please pay special attention to safety operation.

(1) Keep away from people and obstacles

"The flying speed and status of the drone is uncertain, so it may cause potential danger."

When choosing a flying site should stay clear of buildings, trees and power lines. AVOID

flying in or near crowded areas. Meanwhile avoid flying in rain, storms, thunder and

lightening to protect machinery and parts out of damage.

(2) Keep away from humid environments

Inside of drone is made up of precise electronic components. Stay away from humidity or

water vapor to protect machinery and parts.

(3) Safety operation

Please fly your drone according to your physical status and flight skill. Fatigue, listlessness

and mis-operation will increase possibilities of accidental hazard.

(4) Keep away from rotating blades

Keep your face and body as well as all spectators away from the rotating blades. The

spinning blades of a model of this type can cause serious injury.

(5) We recommend flying the drone below 10 meters of height.

(6) Keep away from heat

A drone is made up of metal, fiber, plastic, electronic components, etc. Keep it away from

heat and sunshine to avoid distortion, and damage.

1.3 Check List Before First Flight

(1) Flying field should be in an open space and we suggest at least 5M length *5M wide

*3M height.

(2) Make sure the receiver and transmitter is fully charged.

(3) Please strictly obey the order of turn-on, turn-off before operation. When starting your

flight, first turn on the transmitter, and connect the battery with drone last; When finishing

your flight, please disconnect the battery from your drone first, turn off transmitter last.

An upset in the order of connection may cause your drone loose control to threaten

yourself and others safely. Please follow a correct habit of turn-on and turn-off.

(4) Make sure the connection is solid between battery or motor. The ongoing vibration

may cause bad connection of power terminal and make the drone uncontrollable.

Drone

Replacing the damaged blades:

Your set will come with 4 spare rotors, two type A

(A1=A2)

and two type B. You will see the "A" and "B" word (B1=B2)

on the canopy, then put the rotor on the motor

accordingly

r

batteries

Battery Installation & Charging

Controller

Battery installation should be done under adult supervision only!

Do not mix old and new batteries.

Do not mix different types of batteries.

To install batteries: Open the cover of battery case, insert 3 x 1.5V AA batteries,

according to indicated polarity (batteries not included).

For age 14+

Denver DCW-340

DENVER.EU

www.facebook.com/denver.eu

Please read this instruction manual carefully before using the product

Standard Operation Steps

3. Place the drone on a flat

surface

4. Push the throttle up and

down, a beep will sound:

controller has connected

with the drone

(LED lights on the drone stops flashing)

2. Turn on the drone

(LED lights on the drone flashes slowly)

1. Turn on the controller

Headless Mode

Start / Quit Headless Mode

Press the button on controller (as picture) you will hear beep sounds, then you get into

headless mode and lights flash on the drone. Press it again to quit.

At the moment when you start headless mode, the direction that controller is pointing

to will be fixed as the directions of drone. No matter how you rotate the drone, the front

direction won’t change accordingly.

One Key Reverse

Press and hold this button (as picture), and you will activate

One Key Reverse and the drone will now attempt to fly back

towards its starting direction.

If you want to deactivate this mode, then push the

right joystick (Rudder) to any direction.

Note: The drone will not land automatically, you still

need to control the height of the drone when using

the one key reverse flying mode.

ENGLISH

Remote Control

6. Press [Take-off], drone flys

up and hovers at a fixed height;

Press [Land], drone lands on

the ground and motors stop.

Press [Emergency], all motors

stop and drone fall down directly

Calibration Reset (Very important!)

Before first flying, Calibration Reset is necessary to be done,

to make sure the drone will fly stably: Pull the throttle and rudder to

Bottom Left corner at the same time for 3 secs, the LED lights on

the drone flashes quickly, then let go the throttle and rudder.

The LED lights on the drone stops flashing and keeps on.

Calibration Reset complete.

Front

Left

Right

Back

WiFi Camera

Main Accessories

BladeBlade guardsLanding feetLi-po Battery

Remote controller

USB Charge cable

Flips and rolls

After you have the basics of flying, you’re ready to learn flip and roll your drone.

To perform a flip or roll, press the button, make sure the drone is at least 3 meters offFlip

the ground and quickly push the Rudder, in either direction to make the drone flip or roll.

Once the manoeuvre is completed, steady the drone.

5. To start motors (3 methods):

a. Push the throttle to the top

position and release it quickly.

b. Press button ‘’Start motors

c. Pull the Throttle to the bottom

left corner and Rudder to bottom

right corner at the same time.

Camera

ENG 7

Electric and electronic equipment and included batteries contains materials, components and

substances that can be hazardous to your health and the environment, if the waste material

(discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol,

seen above. This symbol signifies that electric and electronic equipment and batteries should

not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and

designated facility. In this manner you make sure that the batteries are recycled in accordance

with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and

batteries can either be submitted free of charge at recycling stations and other collection sites,

or be collected from the households. Additional information is available at the technical

department of your city.

Hereby, Denver A/S declares that the radio equipment type DENVER DCW-340 is in compliance

with Directive 2014/53/EU. The full text of the RED declaration of conformity is available at the

following internet address: denver.eu and then click the search ICON on topline of website.

Write model number: DCW-340. Now enter product page, and RED directive is found under

downloads/other downloads.

Information on standby/off mode power consumption and power management for products

complant with Commission Regulation (EU) 2023/826 can be found at the following internet

address: denver.eu and then click the search ICON on topline of website. Write model number:

DCW-340 and enter the page.

Operating Frequency Range: 2458 MHz - 2473 MHz

Max Output Power: 25.9 W

DENVER A/S

Omega 5A, Soeften

DK-8382 Hinnerup

Denmark

www.facebook.com/denver.eu

Denver A/S reserve the rights for print errors

Denver A/S cannot be held responsible for any technical or typographical errors and reserves

the right to make changes to the product and manuals without prior notice. If you detect any

inaccuracies or omissions, please inform us at the address on the back cover.

Please notice - All products are subject to change without any notice.

We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S

A

B

A

B

x4

1. Power ON/OFF

7. Headless / Reverse

4. Left joystick (Throttle)

(Ascend/Descend/

turn left/turn right)

10. Turn left/right trim

8. Emergency stop

6. Start motors

3. Flip

5. Right joystick

(Rudder)

(Forward/Backward/Leftward/Rightward)

13. Forward/Backward trim

11. Leftward / Rightward trim

9. Take off / Land

12. Speed Down

14. Speed Up

Warning!

- Lithium battery inside !

- Do not try to open the device!

- Do not expose to heat, water, moisture or direct sunlight!

1. APP DOWNLOAD & INSTALLATION

1.1 Search [] from iOS App Store or Android Google PlayKY FPV

1.2 Download and install it onto your smart phone or tablet

2. HOW TO CONNECT DRONE WITH APP

2.1 Power on the drone

2.2 Enter the Setting of your smart phone/tablet, and turn on WiFi

2.3 Find a WiFi hotspot [], click to connect it until “connected”.KY...

2.4 Start the App [], click the icon [] to enter the control interface.KY FPVSTART

Meanwhile, real time video from the camera can be enjoyed.

2.5 Now users can control the drone with with the icons in the App. For detailed control

guide, please click the icon [] to read carefully.?

2.6 Photos and Video files will be stored onto smart phone/tablet automatically.

Note: To control the drone flying through the App, the remote controller must be off.

Product specificaties