Denver CRL-350 Handleiding

Denver Radio CRL-350

Lees hieronder de 📖 handleiding in het Nederlandse voor Denver CRL-350 (9 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

Overview of the product

1. MEM/M+ button / SET button /

Y-M-D button

2. MOOD LIGHT button/ MOOD

LIGHT CHANGE button

3. LIGHT UP button

4. LIGHT ON/OFF button /

SNOOZE button

5. DIM DOWN button

6. ALARM 2 button / VOL UP

button

7. POWER button / SOURCE

button / ALARM OFF button

8. ALARM 1 button / VOL DOWN

button

9. BACKWARD button

10.FORWARD button

11. SLEEP button / DIMMER button

12.Battery compartment

13.Lamp shade

14.Alarm 1 indicator

15.Display

16. FM indicator

17.Alarm 2 indicator

18.DC IN jack

19.USB charging port

20.Antenna

Setting the clock

1. Make sure the POWER button is NOT activated. If the radio is playing any music

source (i.e. radio/nature sound), press the POWER button to switch OFF.

2. Press and hold the SET button to enter the clock setting mode.

3. Press the SET button repeatedly to cycle through the setting options:

Year > Month > Day > 12 hr/24 hr (time format) > Hour time > Minute time

•Press the FORWARD button to adjust the values in each setting option. Press and hold

the button to change the values quickly.

•Press the SET button to confirm each setting option.

Note: the PM icon shows with the selection of the 12-Hr clock for PM time.

Listening to radio

1. Press the POWER button to switch the music mode on.

2. Press and hold the SOURCE button to select the radio mode (radio frequency shows

on the display).

3. Press the FORWARD button to adjust frequency.

4. Press and hold the FORWARD button to automatically tune to the next available FM

station.

5. Press the POWER button to switch the radio mode off.

** Unroll and extend the antenna to improve FM signal reception.

Setting preset stations

You can store up to 10 preset stations.

1. Tune to a station.

2. Press and hold the MEMORY+ button until “P01” shows on the display.

3. Press the FORWARD button to select a preset number (P01-P10).

4. Press the SET button to confirm.

5. Press the MEM/M+ button repeatedly while listening to the radio to select a preset

station. Alternatively, press the MEM/M+ button once and then press the FORWARD

button to select a preset station.

Listening to nature sounds

Six nature sounds are available to enhance ambiance.

1. Press the POWER button to switch the music mode on.

2. Press and hold the SOURCE button to select the nature sound mode (n-1, n-2, n-3, n-

4, n-5, n-6 shows on the display).

3. Press the FORWARD button to select a nature sound.

4. Press the POWER button to switch the nature sound mode off.

Setting alarms

The radio lets you have 2 alarm settings.

1. Make sure the POWER button is NOT activated. If the radio is playing any music

source (i.e. radio or nature sound), press the POWER button to switch it OFF.

2. Press the ALARM 1/ALARM 2 button to show the current alarm 1 or 2 setting,

respectively.

3. Press and hold the ALARM 1/ALARM 2 button to enter the alarm time setting mode.

4. In the alarm setting mode, press the ALARM 1/ ALARM 2 repeatedly to cycle through

the setting options:

Alarm hour time > alarm minute time > Alarm frequency (see note 1) > Alarm

sound source (see note 2) > Light intensity

•Press the FORWARD button to adjust the values in each setting option. Press and hold

the button to change the values quickly.

•Press the ALARM 1/ALARM 2 button to confirm each setting option.

•Once settings are done, the alarm is enabled and the corresponding AL 1/ AL 2

icon will show

Note:

1. In the alarm frequency setting, you can select the following:

1-5 = Monday to Friday, 1-7 = Everyday, 6-7 = Weekend only, 1, 2, 3, 4, 5, 6 or 7 =

Once a week only (on the selected day)

2. Select the buzzer (“bu” shows on the display), the radio (the last played radio

frequency shows on the display), or nature sound (“nS” shows on the display) as the

alarm sound source.

All alarm sound sources will increase their volume gradually when the alarm sounds.

If the radio is selected as the alarm sound source, you are prompted to select the radio

maximum volume when the alarm sounds.

If the nature sound is selected as the alarm sound source, you are prompted to select

the type of nature sound and then the maximum volume when the alarm sounds.

Alarm wake-up light

•The wake-up light can be set at a light intensity level from L01 to L20 or off. If a light

intensity level from L01 to L20 is set, the light will switch on at its lowest intensity 30

minutes before the set alarm time.

•The light will then gradually increase to the set maximum brightness until the alarm

goes off. For example, if the alarm is set for 8:30 with a light intensity of L10, the light

will switch on at 8:00 at the lowest level (L01) and gradually increase to the light level

L10 at 8:30.

•The light will not turn on if the alarm is set less than 30 minutes before the set time.

Turning the alarms on or off

When the clock time is displayed, press and hold the ALARM 1 or ALARM 2 button to

enable or disable the respective alarm. The corresponding alarm icon (AL1/ AL2) will

switch on when the alarm is enabled.

Deactivating a sounding alarm

•Press the LIGHT ON/OFF button to temporarily silence the alarm (snooze) and then

press the ALARM OFF button to switch off a sounding alarm.

•When the alarm sounds, the corresponding alarm icon (AL1 or AL2) flashes on the

display.

•The alarm will continue sounding for 30 minutes if no button is pressed. Then it will

stop automatically until the same time next day.

Sleep

•This sleep function defines the duration of time before the radio switches itself off

automatically.

Product specificaties

Merk:	Denver
Categorie:	Radio
Model:	CRL-350
Kleur van het product:	Verschillende kleuren
Ingebouwd display:	Ja
Gewicht:	630 g
Breedte:	115 mm
Diepte:	115 mm
Hoogte:	150 mm
Breedte verpakking:	145 mm
Diepte verpakking:	145 mm
Hoogte verpakking:	215 mm
Stroombron:	AC
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	- W
Soort tuner:	Analoog & digitaal
Backlight:	Ja
Inclusief dockingstation:	Nee
Thermometer:	Nee
Ondersteunde frequentiebanden:	FM, PLL
Radio:	Klok
Projectie:	Nee
Apple docking-compatibiliteit:	Niet ondersteund
Dimmer:	Ja
Hoeveelheid per (buitenste) hoofdverpakking:	8 stuk(s)
AC-ingangsspanning:	230 V
Type beeldscherm:	LED
Type batterij:	CR2032
Producten per intermodale container (40 ft - High Cube):	12648 stuk(s)
Producten per intermodale container (20 ft):	5208 stuk(s)
Back-upbatterij:	Ja
Wekmodus radio:	Ja