Denon DN-X400 Handleiding

Denon Mengpaneel DN-X400

Lees hieronder de đź“– handleiding in het Nederlandse voor Denon DN-X400 (35 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/35
DJ MIXER
DN-X400
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
INSTRUCCIONES DE OPERACION
4321
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DIGITAL OUT
DIGITAL OUT
DIGITAL OUT
DIGITAL OUT
L/CUE
CUE
10
8
6
2
4
0
R/PGM
CH FADER START
LINE8LINE6LINE2
MIC
MAIN
MAX
10
8
4
6
+10dB
+10dB
0
2
+10dB
MIN
HI
-26dB
-26dB
-26dB
LOW
MID
GAINGAIN MAX
8
10
6
4
HI
MID
MIN
-26dB
-26dB
+10dB
+10dB
2
0
LOW
-26dB
+10dB
LINE4
10
8
4
6
MAXMIN GAIN
HI
MID
-26dB
-26dB
+10dB
+10dB
0
2
LOW
-26dB
+10dB
+12dB-12dB
+12dB-12dB
+12dB-12dB -26d B
+10dB
-26dB
+10dB
CH FADER START
+10dB
F/S F/S
METER
ON/OFF
MIC POST
-26dB
ON OFF
CH FADER START
CROSSFADER
ASSIGN B
CONTOUR
ON/OFF
ASSIGN A
OFF
3
2
1
4
PWR
CH 4CH 3CH 2CH 1
ON/OFF
10
8
6
4
2
0
LEVEL 100
CUE/PGM
100
LEVEL
L-CUE
R-PGM
PGM
PAN
CUE STEREO
MONO
3
2
1
4OFF
MAXMIN GAIN
10
8
6
HI
4
2
0
LOW
MID
100
LEVEL
100LEVEL
+8+5+3+10-1-3-5-7-10-15-20
HI
MID
LOW
A B
PHONO2/LINE7PHONO1/LINE5
LINE1 LINE3
START A
FADER
CROSS
MARK
TRACK
CROSS
FADER
START B
EFFECT
LOOP
/ZONE
BOOTH
PHONES
MASTER
MAIN MIC
AUX MIC
FOR ENGLISH READERS PAGE 15 ~ PAGE 19
FĂśR DEUTSCHE LESER SEITE 10 ~ SEITE 14
POUR LES LECTEURS FRANCAIS PAGE 15 ~ PAGE 19
PARA LECTORES DE ESPAĂ‘OL PAGINA 20 ~ PAGINA 24
VOOR NEDERLANDSTALIGE LEZERS PAGINA 25 ~ PAGINA 29
FOR SVENSKA LĂ„SARE SIDA 30 ~ SIDA 34
GEBRUIKSAANWIJZING
BRUKSANVISNING
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PESONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions
should be followed.
5. Water and Moisture – The appliance should not be used
near water – for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. Carts and Stands – The appliance should be used only with
a cart or stand that is recommended by the manufacturer.
6A. An appliance and cart
combination should be
moved with care.
Quick stops, excessive
force, and uneven
surfaces may cause
the appliance and cart
combination to overturn.
7. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
8. Ventilation – The appliance should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10. Power Sources – The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Grounding or Polarization – Precautions should be taken so
that the grounding or polarization means of an appliance is
not defeated.
12. Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
14. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
15. Power Lines – An outdoor antenna should be located away
from power lines.
16. Outdoor Antenna Grounding – If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna-discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. See Figure A.
17. Nonuse Periods – The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
18. Object and Liquid Entry – Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
19. Damage Requiring Service – The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
20. Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it
is damaged or deformed, it may cause electric shock
or malfunction when used. When removing from wall
outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top
cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the DJ
mixer.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. DN-X400 Serial No.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This Class A digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes
les exigences du Règlement sur le matériel brouilleur
du Canada.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTERODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’ AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LABELS:
FIGURE A
EXAMP LE OF ANT EN NA GROUND ING
AS PER NAT IONAL
ELEC T R IC AL C ODE ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
3
ENGLISH
NOTE ON USE / HINWEISE ZUM GEBRAUCH /
OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO /
ALVORENS TE GEBRUIKEN / OBSERVERA
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Vermeiden Sie hohe Temperaturen.
Beachten Sie, daĂź eine ausreichend
Luftzirkulation gewährleistet wird, wenn das
Gerät auf ein Regal gestellt wird.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une
étagère.
• Evite altas temperaturas
Permite la suficiente dispersiĂłn del calor
cuando está instalado en la consola.
• Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het
apparaat op een rek wordt geplaatst.
• Undvik höga temperaturer.
Se till att det finns möjlighet till god
värmeavledning vid montering i ett rack.
• Keep the set free from moisture, water, and
dust.
• Halten Sie das Gerät von Feuchtigkeit,
Wasser und Staub fern.
• Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
• Mantenga el equipo libre de humedad, agua
y polvo.
• Laat geen vochtigheid, water of stof in het
apparaat binnendringen.
• Utsätt inte apparaten för fukt, vatten och
damm.
• Do not let foreign objects in the set.
• Keine fremden Gegenstände in das Gerät
kommen lassen.
• Ne pas laisser des objets étrangers dans
l’appareil.
• No deje objetos extraños dentro del equipo.
• Laat geen vreemde voorwerpen in dit
apparaat vallen.
• Se till att främmande föremål inte tränger in i
apparaten.
• Do not let insecticides, benzene, and thinner
come in contact with the set.
• Lassen Sie das Gerät nicht mit Insektiziden,
Benzin oder VerdĂĽnnungsmitteln in
BerĂĽhrung kommen.
• Ne pas mettre en contact des insecticides,
du benzène et un diluant avec l’appareil.
• No permita el contacto de insecticidas,
gasolina y diluyentes con el equipo.
• Laat geen insektenverdelgende middelen,
benzine of verfverdunner met dit apparaat in
kontakt komen.
• Se till att inte insektsmedel på spraybruk,
bensen och thinner kommer i kontakt med
apparatens hölje.
• Unplug the power cord when not using the
set for long periods of time.
• Wenn das Gerät eine längere Zeit nicht
verwendet werden soll, trennen Sie das
Netzkabel vom Netzstecker.
• Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de
longues périodes.
• Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
• Neem altijd het netsnoer uit het stopkontakt
wanneer het apparaat gedurende een lange
periode niet wordt gebruikt.
• Koppla ur nätkabeln om apparaten inte
kommer att användas i lång tid.
• Do not obstruct the ventilation holes.
• Die Belüftungsöffnungen dürfen nicht
verdeckt werden.
• Ne pas obstruer les trous d’aération.
• No obstruya los orificios de ventilación.
• De ventilatieopeningen mogen niet worden
beblokkeerd.
• Täpp inte till ventilationsöppningarna.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie
den Stecker herausziehen.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordĂłn de energĂ­a.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer
deze moet worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
• Never disassemble or modify the set in any
way.
• Versuchen Sie niemals das Gerät
auseinander zu nehmen oder auf jegliche Art
zu verändern.
• Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
• Nunca desarme o modifique el equipo de
ninguna manera.
• Nooit dit apparaat demonteren of op andere
wijze modifiëren.
• Ta inte isär apparaten och försök inte bygga
om den.
âś˝ (For sets with ventilation holes)
32
105
58
4321
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DN-X400
DIGITAL OUT
DIGITAL OUT
DIGITAL OUT
DIGITAL OUT
L/CUE
CUE
10
8
6
2
4
0
R/PGM
CH FADER START
LINE8LINE6LINE2
MIC
MAIN
MAX
10
8
4
6
+10dB
+10dB
0
2
+10dB
MIN
HI
-26dB
-26dB
-26dB
LOW
MID
GAINGAIN
MAX
8
10
6
4
HI
MID
MIN
-26dB
-26dB
+10dB
+10dB
2
0
LOW
-26dB
+10dB
LINE4
10
8
4
6
MAXMIN
GAIN
HI
MID
-26dB
-26dB
+10dB
+10dB
0
2
LOW
-26dB
+10dB
+12dB-12dB
+12dB-12dB
+12dB-12dB -26dB
+10dB
-26dB
+10dB
CH FADER START
+10dB
F/S F/S
METER
ON/OFF
MIC POST
-26dB
ON OFF
CH FADER START
CROSSFADER ASSIGN B
CONTOUR
ON/OFF
ASSIGN A
OFF
3
2
1
4
PWR
CH 4CH 3CH 2CH 1
ON/OFF
10
8
6
4
2
0
LEVEL
100
CUE/PGM
100
LEVEL
L-CUE
R-PGM
PGM
PAN
CUE STEREO
MONO
3
2
1
4OFF
MAXMIN
GAIN
10
8
6
HI
4
2
0
LOW
MID
100
LEVEL
100
LEVEL
+8+5+3+10-1-3-5-7-10-15-20
HI
MID
LOW
A B
PHONO2/LINE7PHONO1/LINE5
LINE1 LINE3
START A
FADER
CROSS
MARK
TRACK
CROSS
FADER
START B
EFFECT
LOOP
/ZONE
BOOTH
PHONES
MASTER
MAIN MIC
AUX MIC
BOOTH/ZONE
LR
FREQ.
100Hz
40Hz 200Hz
OPTICALCOAXIAL
DIGITAL OUT SUB WOOFER
POWER
OFF
ON
REC
OUT
RETURNSEND
EFFECT
L
R
UNBALANCEDBALANCED
R L
MASTER OUT
PHONO2/LINE7
CH4
L
LNPH
R
CH1CH2
LINE3
CH3
PHONO1/LINE5
L
RLNPH
LINE1
FADERFADER
SIGNAL GND
LINE2LINE4LINE6LINE8
AUX MIC
MAIN MIC
177
101.6
26
23
6
25275
8117
117984321
13 14981179
1211798
10
26
24 23 2021
17 28
15 16
18
22
19
44
39
39
37
3130
39
39
39
41
39
41
4540404242
43
35 363332343829
482
465
FRONT PANEL DIAGRAM / VORDERES BEDIENFELD-SCHEMA /
SCHEMA DU PANNEAU AVANT / DIAGRAMA DEL PANEL FRONTAL /
OVERZICHT VAN VOORPANEEL / FRONTPANELEN
REAR PANEL DIAGRAM / HINTERES ANSCHLUSSFELD-SCHEMA /
SCHEMA DU PANNEAU ARRIERE / DIAGRAMA DEL PANEL POSTERIOR /
OVERZICHT VAN ACHTERPANEEL / BAKPANELEN
7 x 10 hole
Loch 7 x 10
Trou 7 x 10
Unit: mm
Gerät: mm
Unité: mm
Unidad: mm
Toestel: mm
Enhet: mm
DEUTSCH FRAN AISÇ
Orificio de 7 x 10
Opening 7 x 10
HĂĄl, 7 x 10
ESPAĂ‘OL SVENSKANEDERLANDS
CAUTION
•The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths,
curtains, etc.
•No naked flame sources, such as lighted candles, should be placed on the apparatus.
•Please be care the environmental aspects of battery disposal.
•The apparatus shall not be exposed to dripping or splashing for use.
•No objects filled with liquids, such as vases, shall be placed on the apparatus.


Product specificaties

Merk: Denon
Categorie: Mengpaneel
Model: DN-X400

Heb je hulp nodig?

Als je hulp nodig hebt met Denon DN-X400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Denon

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel