Delta ShopMaster S36-320S Handleiding


Pagina's 26 Zaagmachine

Bekijk de handleiding van Delta ShopMaster S36-320S gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

UNIVERSAL STAND
SOPORTE DE SIERRA DE INGLETE
www.ShopMasterMachinery.com
S36-320S
Instruction Manual
To reduce the risk of serious injury,
thoroughly read and comply with all warnings and
instructions in this manual and on product. KEEP
THIS MANUAL NEAR YOUR PRODUCT FOR
EASY REFERENCE AND TO INSTRUCT OTHERS
Español (14)
Manual de instrucciones
23
TABLE OF CONTENTS
DESCRIPTIONSPECIFICATIONS
Max Height32.2 inches
Min Height24.5 inches
Middle Position28.3 inches
Weight Capacity (Center Table)400 lbs.
Table-Top Dimensions21.5 inches x 16.6 inches
Max Width of Work-Rest Supports49.4 inches
Weight Capacity of Work Supports44 lbs.
PRODUCT SPECIFICATIONS
IMPORTANT SAFETY INSTRUCTIONS
SAFETY SYMBOLS- DEFINITIONS
This manual contains information that is important for you to know and understand. This information relates to protecting
YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols
below. Please read the manual and pay attention to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS ON YOUR
PRODUCT AND IN THIS MANUAL. SAVE THIS MANUAL. MAKE SURE ALL USERS ARE FAMILIAR
WITH ITS WARNINGS AND INSTRUCTIONS WHEN USING THE TOOL. Improper operation,
maintenance or modification of tools or equipment could result in serious injury and/or property damage.
PRODUCT SPECIFICATIONS ...........................................2
IMPORTANT SAFETY INSTRUCTIONS ............................2
SAFETY SYMBOLS-DEFINITIONS ...................................2
GENERAL SAFETY RULES ................................................3
PROPOSITION 65 WARNING ..........................................4
PREPARATION ................................................................4
UNPACKING ....................................................................4
PACKAGE CONTENTS ......................................................5
HARDWARE CONTENTS ..................................................5
ASSEMBLY .......................................................................6
STAND ASSEMBLY ...........................................................6
ADJUSTMENT INSTRUCTIONS ........................................8
ADJUSTING SUPPORT AND EXTENSION TUBES ................8
ADJUSTING LEG HEIGHT ...............................................10
ATTACH SAW TO STAND ...............................................11
WARRANTY ...................................................................13
ESPAÑOL .......................................................................14
3
GENERAL SAFETY RULES
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.
• EYE PROTECTION. All persons in work area should wear safety glasses with side shields. Everyday eyeglasses with
impact resistant lenses are not safety glasses. Eye equipment should comply with ANSI Z87.1 or CAN/CSA Z94.3
standards.
• HEARING PROTECTION. All people in work area should wear proper hearing protection consistent with noise levels
and exposure. Hearing equipment should comply with ANSI S3.19 standards.
• DUST PROTECTION. Use of power tools can generate and/or distribute dust, which may cause serious or
permanent respiratory damage. Direct particles away from face and body. Always operate machines in well-ventillated
area and provide for proper dust removal. Use dust collection system whenever possible. Exposure to dust may cause
serious or permanent respiratory or other illness, including silicosis (a serious lung disease), cancer, and death. Avoid
breathing dust and avoid prolonged contact with dust. Allowing dust to get in your mouth or eyes, or lay on your skin
may promote absorption of harmful material. Use properly fitting NIOSH/OSHA/MSHA approved respiratory protection
appropriate for the dust exposure and wash exposed areas with soap and water.
• THIS PRODUCT WAS DESIGNED TO BE USED AS A STAND FOR MITER SAWS AND TABLE SAWS. DO
NOT alter the stand, use it with other products, or for other purposes. The stand will support 400 lbs., including both
machine and workpiece. Any misuse or abuse can result in product damage or personal injury.
• USE CARE WHEN ASSEMBLING, MOVING, RAISING OR LOWERING THE STAND to reduce the risk of
pinching hands and fingers.
• PLACE THE STAND ON A FLAT AND LEVEL SURFACE to prevent rocking or tipping. Do not use the stand on an
uneven, unstable or slippery surface. Always check the stability of the stand before connecting the machine to power
source.
• DO NOT STAND ON THIS PRODUCT or use the support extensions as a ladder or scaffolding. It is unsafe to climb,
sit or stand on this product.
• CHECK PRODUCT FOR DAMAGE. Before using stand, and after it has been dropped or damaged, check moving
and affected components of stand and any attached machines for alignment, binding, breakage and any other
condition that may affect the machine’s performance and the stand’s ability to properly support and secure the
machine. Do not use a damaged product. A damaged product should be properly repaired using only identical
replacement parts.
• CHECK THE LEGS, MOUNTING BRACKETS AND OTHER SUPPORTS
• DISCONNECT MACHINE from power source before attaching it to stand, and when machine is not in use.
• PROPERLY MOUNT machine and adjust work piece supports so the work piece(s) will be level with machine table.
• PROPERLY SECURE THE MACHINE to the stand before connecting it to power source.
• DO NOT ATTEMPT to use stand for operations involving an awkward or oversized work piece that could cause the
stand to tip over.
• WHEN TRANSPORTING STAND, make sure it is properly secured and knobs are tightened.
• CONSULT MITER SAW MANUAL OF TABLE SAW MANUAL for safe and proper operation of any miter saw used
with this stand.
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
If tool is loaned to someone, also loan them these instructions.

Beoordeel deze handleiding


Product specificaties

Merk: Delta
Categorie: Zaagmachine
Model: ShopMaster S36-320S

Heb je hulp nodig?

Als je hulp nodig hebt met Delta ShopMaster S36-320S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden