Definitive Technology ProCinema 60 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Definitive Technology ProCinema 60 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible
or concealed damage most likely occurred in handling after it left
our plant and should be reported at once to your Deļ¬nitive dealer
or the shipping company which delivered your loudspeaker.
Congratulations
Congratulations on your purchase of the
Deļ¬nitive Technology ProCinema 60
System. This high-performance six-
speaker system is designed to deliver
equally superb sound with music or
movies. Please read the instructions
carefully in order to fully familiarize
yourself with the speaker system and
assure yourself that you realize all the
performance that has been engineered
into this superior product.
ProCinema
Ā®
60 System
Owner's Manual
2
CAUTION! To reduce the risk of electric shock and ļ¬re, do not remove the cover or back
plate of this device. There are no user serviceable parts inside. Please refer all servicing to
licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert
the user to uninsulated ā€œdangerous voltageā€ within the deviceā€™s enclosure. The international
symbol of an exclamation point inside a triangle is intended to alert the user to the presence
of important operating, maintenance and servicing information in the manual accompanying
the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la ļ¬che dans
la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain
or moisture.
1. Read Instructionsā€”All safety and operating instructions should be read before operating the device.
2. Retain Instructionsā€”The safety and operating instructions should be retained for future reference.
3. Heed Warningsā€”All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructionsā€”All operating and safety instructions should be followed.
5. Water & Moistureā€”The device should never be used in, on or near water for risk of fatal shock.
6. Carts & Standsā€”The device should only be used on carts or stands recommended by the manufacturer.
7. Wall & Ceiling Mountingā€”The device should be mounted on a wall or ceiling only as recommended
by the manufacturer.
8. Ventilationā€”The device should always be located in such a way that it maintains proper ventilation. It
should never be placed in a built-in installation or anywhere that may impede the ļ¬‚ow of air through its
heat sink.
9. Heatā€”Never locate the device near heat sources such as radiators, ļ¬‚oor registers, stoves or other
heat-generating devices.
10. Power Supplyā€”The device should only be connected to a power supply of the type described in the
operating instructions or as marked on the device.
11. Power Cord Protectionā€”Power cables should be routed so they are not likely to be stepped on or
crushed by items placed on them or against them. Special attention should be paid to areas where the
plug enters a socket or fused strip and where the cord exits the device.
12. Cleaningā€”The device should be cleaned in accordance with manufacturerā€™s instructions.
13. Periods Of Non-Useā€”The device should be unplugged when not being used for extended periods.
14. Dangerous Entryā€”Care should be taken that no foreign objects or liquids fall or are spilled inside
the device.
15. Damage Requiring Serviceā€”The device should be serviced by licensed technicians when:
ā€¢ The plug or power supply cord has been damaged.
ā€¢ Objects have fallen or liquid spilled inside of the device.
ā€¢ The device has been exposed to moisture.
ā€¢ The device does not appear to be operating properly or exhibits a marked change in performance.
ā€¢ The device has been dropped or the cabinet becomes damaged.
16. Serviceā€”The device should always be serviced by licensed technicians. Only replacement parts
speciļ¬ed by the manufacturer should be used. The use of unauthorized substitutions may result in
ļ¬re, shock, or other hazards.
Safety Precautions for ProSub 60
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
The Deļ¬nitive Technology ProCinema 60 System consists of six speakers:
four ProMonitorĀ®60s, one ProCenterĀ®60 and one ProSubĀ®60. Normally two of the
ProMonitor 60s will be used as front speakers and two will be used as side or rear
surround speakers. These speakers can be used with any surround decoding technol-
ogy; however, since they will most often be used with Dolby Digital
*receivers and
decoders, the instruction manual is written for Dolby Digital hook-ups (and DTS
which is hooked up the same way). If you are using an earlier ProLogic
*receiver,
please contact Deļ¬nitive customer service for speciļ¬c instructions that apply to
your system.
ProCinema 60 Six-Piece Surround Sound System
Connecting Your Loudspeakers
Usually if distortion is heard when the speakers are being driven at loud
levels, it is caused by driving (turning up) the ampliļ¬er too loud and not
driving the speakers with more power than they can handle. Remember,
most ampliļ¬ers put out their full rated power well before the volume control
is turned all the way up! If your speakers distort when you play them loud,
turn down the ampliļ¬er or get a bigger one.
Wiring up Your Speakers to Your Home Theater Surround Receiver
There are many different ways to wire your ProCinema 60 System to your home
theater surround receiver. In order to simplify this process, we will describe the two
most common methods. Method 1, which involves wiring your front left and right
ProMonitor 60s to your ProSub 60 and then wiring your ProSub 60 to your receiver, is
the preferred method in terms of sound quality ā€” it will give you the best blending
between the satellite speakers and the sub as well as the fullest, richest sound quality.
Method 2, which involves wiring the front left and right ProMonitor 60s directly to
your receiver and hooking your sub up with an RCA cable, uses less speaker wire and
still sounds good but clearly not as good as Method 1. We recommend Method 1, if
possible.
Method 1
1) First, wire the + (red) terminal of the left channel speaker wire output of your
receiver or ampliļ¬er to the + (red) terminal of the left channel speaker wire
(high level) input of your ProSub.
2) Next, wire the ā€“ (black) terminal of the left channel speaker wire output of your
receiver or ampliļ¬er to the - (black) terminal of the left channel speaker wire
(high level) input of the ProSub.
3) Repeat Steps 1 and 2 for the right channel.
4) Wire the + (red) terminal of the left ProMonitor 60 to the left channel + (red)
speaker wire (high level) out on the back of the ProSub.
5) Wire the ā€“ (black) terminal of the left ProMonitor 60 to the left channel ā€“ (black)
speaker wire (high level) out on the back of the ProSub.
* Registered trademarks.


Product specificaties

Merk: Definitive Technology
Categorie: Speaker
Model: ProCinema 60

Heb je hulp nodig?

Als je hulp nodig hebt met Definitive Technology ProCinema 60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Definitive Technology

Handleiding Speaker

Nieuwste handleidingen voor Speaker