Definitive Technology BP7000sc Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Definitive Technology BP7000sc (15 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
Congratulations
Congratulations on your purchase of the Deļ¬nitive
Technology BP7000SC SC/BP7001 Bipolar Loudspeaker
System. The BP7000SC SC/BP7001 are very unique
speakers which combine our award-winning patented bipolar
technology with a built-in side-ļ¬ring SuperCube Technology
subwoofer system complete with ultra-high power digital
ampliļ¬ers. These extraordinary speakers truly revolutionize
the state-of-the-art in music and home theater loudspeakers.
Our engineers have spent many years in developing this
product. In order to ensure that you experience the ļ¬nest
performance possible, we encourage you to take a moment
to fully read this ownerā€™s manual and familiarize yourself
with the proper installation and set-up procedures for your
BP7000SC SC/BP7001 speakers.
BP7000 /BP7001SC SC
Bipolar Loudspeaker with Built-In Powered SuperCube
Ā®Technology
Subwoofers
Ownerā€™s Manual
CAUTION! To reduce the risk of electric shock and ļ¬re, do not remove the cover or back plate of
this device. There are no user serviceable parts inside. Please refer all servicing to licensed service
technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the
user to uninsulated ā€œdangerous voltageā€ within the deviceā€™s enclosure. The international symbol
of an exclamation point inside a triangle is intended to alert the user to the presence of important
operating, maintenance and servicing information in the manual accompanying the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la ļ¬che dans la
borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain
or moisture.
1. Read Instructionsā€”All safety and operating instructions should be read before operating the device.
2. Retain Instructionsā€”The safety and operating instructions should be retained for future reference.
3. Heed Warningsā€”All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructionsā€”All operating and safety instructions should be followed.
5. Water & Moistureā€”The device should never be used in, on or near water for risk of fatal shock.
6. Carts & Standsā€”The device should only be used on carts or stands recommended by the manufacturer.
7. Wall & Ceiling Mountingā€”The device should be mounted on a wall or ceiling only as recommended by the
manufacturer.
8. Ventilationā€”The device should always be located in such a way that it maintains proper ventilation. It should
never be placed in a built-in installation or anywhere that may impede the ļ¬‚ow of air through its heat sink.
9. Heatā€”Never locate the device near heat sources such as radiators, ļ¬‚oor registers, stoves or other heat-
generating devices.
10. Power Supplyā€”The device should only be connected to a power supply of the type described in the operating
instructions or as marked on the device.
11. Power Cord Protectionā€”Power cables should be routed so they are not likely to be stepped on or crushed by
items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or
fused strip and where the cord exits the device.
12. Cleaningā€”The device should be cleaned in accordance with manufacturerā€™s instructions.
13. Periods Of Non-Useā€”The device should be unplugged when not being used for extended periods.
14. Dangerous Entryā€”Care should be taken that no foreign objects or liquids fall or are spilled inside the device.
15. Damage Requiring Serviceā€”The device should be serviced by licensed technicians when:
ā€¢ The plug or power supply cord has been damaged.
ā€¢ Objects have fallen or liquid has spilled inside the device.
ā€¢ The device has been exposed to moisture.
ā€¢ The device does not appear to be operating properly or exhibits a marked change in performance.
ā€¢ The device has been dropped or the cabinet becomes damaged.
16. Serviceā€”The device should always be serviced by licensed technicians. Only replacement parts speciļ¬ed
by the manufacturer should be used. The use of unauthorized substitutions may result in ļ¬re, shock, or
other hazards.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To reduce the risk of the product inadvertently tipping over, four stabilizer brackets with mounting screws
have been supplied. These must be installed in the base of the product in the slots provided.
Installation Instructions:
Tools required: Philips screw driver (not supplied)
Parts required: Four stabilizer brackets (supplied), eight screws (supplied)
Instructions:
1. Carefully lay the speaker on its front surface.
2. Place one of the stabilizer brackets in the rear slot provided. (Note: Stabilizer bracket will be ļ¬‚ush with bottom
of base.)
Safety Precautions
CAUTION Important Safety Instructions
2
It is important, because of the BP7000sc/BP7001scā€™s unique bipolar
(front and rear) radiation pattern, that some simple set-up recommendations be
followed in order to assure optimum performance in your room. Please remember
that although these recommendations are usually valid, all rooms and listening
set-ups are somewhat unique, so do not be afraid to experiment with the speakers.
Remember, whatever sounds best to you is correct.
In most rooms the speakers should be placed 5 to 36 inches from the rear wall
in order to allow the rear radiated sound to freely reļ¬‚ect off the back wall. Please
note that they can go closer to, or further from, the wall if desired. Placement
closer to the rear wall will increase the bass output while placement further from
the rear wall will decrease the bass output (which, of course, can be compensated
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or
concealed damage most likely occurred in handling after it left our plant and
should be reported at once to your Deļ¬nitive dealer or the delivery company that
delivered your loudspeaker. Please unpack your system carefully. Save all cartons
and packing materials in case you move or need to ship your system. Record the
serial number found on the back of the BP7000SC SC/BP7001 in the appropriate
place on your warranty card, answer all questions and send it in.
3. Insert two screws provided and tighten them securely, being careful not to strip out material.
4. Repeat steps #2 and #3 for the other stabilizer brackets.
5. Remove the supporting feet closest to the stabilizer brackets and thread them into the brass insert in
the stabilizer brackets.
6. Carefully return the speaker to the upright position and adjust the glides (supporting feet) to level the speaker.
Note: If desired, the four glides (support feet) may be replaced and the four spikes provided may be installed.
The four spikes or glides must be fully threaded into the brass inserts on the stabilizer brackets.
AVERTISSEMENT Mesures de SƩcuritƩ Importantes
Pour rƩduire les risques que le produit se renverse par inadvertance, quatre supports stabiliseurs avec vis de montage
ont Ć©tĆ© fournis. Ceux-ci doivent ĆŖtre installĆ©s sur la base du produit, dans les rainures appropriĆ©es.
ProcĆ©dures dā€™installation:
Outils requis: Tournevis Ć©toile (non fourni)
PiĆØces requises: Quatre supports stabiliseurs (fournis), huit vis (fournies)
Instructions:
1. Coucher soigneusement le haut-parleur sur la face avant.
2. Placer un des supports stabiliseurs dans la rainure appropriĆ©e arriĆØre. (Note: le support stabiliseur sera Ć©gal
au bas de la base)
3. InsƩrer deux des vis prƩvues Ơ cet effet et serrer de faƧon ajustƩe en prenant garde de ne pas Ʃlimer les parois
du matƩriel.
4. RĆ©pĆ©ter les Ć©tapes #2 et #3 pour lā€™autre support stabiliseur.
5. Retirer les niveleurs (pieds de support) les plus rapprochƩs des supports stabiliseurs et visser les niveleurs, dans
lā€™encolure de cuivre des supports stabiliseurs.
6. Relever soigneusement le haut-parleur dans sa position fonctionnelle et ajuster les niveleurs (pieds de support) pour
Ć©galiser le haut-parleur.
Note: Les quatres niveleurs (pieds de support) peuvent ĆŖtre remplacĆ©s, si dĆ©sirĆ©, par les quatres pointes fournies
Ć  cet effet.
Unpacking Your BP7000 /BP7001SC SCs
Positioning the Speakers in Your Room
3


Product specificaties

Merk: Definitive Technology
Categorie: Speaker
Model: BP7000sc

Heb je hulp nodig?

Als je hulp nodig hebt met Definitive Technology BP7000sc stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Definitive Technology

Handleiding Speaker

Nieuwste handleidingen voor Speaker