Definitive Technology Mythos SSA-42 Handleiding

Definitive Technology Speaker Mythos SSA-42

Lees hieronder de 📖 handleiding in het Nederlandse voor Definitive Technology Mythos SSA-42 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Unpacking Your SSA Speakers

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed

damage most likely occurred in handling after it left our plant and should be reported

at once to your Definitive dealer or the delivery company that delivered your loud-

speaker. Please unpack your system carefully. Save all cartons and packing materials in

case you move or need to ship your system. Recor the serial number found on thed

back of the Mythos SSA in the appropriate place on the product registration card,

answer all questions and send it in.

VERY IMPORTANT: Accessories

Various parts and accessories that you will need to use your Mythos SSA are in the

carton but are easy to overlook. Open both ends of the shipping carton. Carefully

examine the contents of the shipping carton and packing material to find the plastic

bags with accessories.

Specifications

SSA-42

Dimensions: 403/8" W (107.6 cm) x 41/8" D (10.48 cm) x 41/2" H (11.4 cm)

(speaker only, not including bracket)

Driver Complement: Three 31/4" (8.3 cm) BDSS High-output drivers with coincident

array 3/4" (20 mm) ferro-magnetic fluid damped pure aluminum

dome tweeter.

Two 31/4" (8.3 cm) BDSS High-output full-range drivers.

Four 3" full-range high-output surround drivers(7.6 cm)

with butyl rubber surrounds.

Frequency Response: 60 Hz – 30 kHz

Nominal Impedance: 8 Ohms

Rec. Assoc. Amplification: 20 – 175 Watts/channel

Sensitivity: 89 dB

Weight: 20 lbs. (4.52 kG)

Specifications subject to change without notice.

Definitive Technology

SSA-42

OWNER’S MANUAL

Mythos Solo Surround Array Loudspeakers

Thank You

Thank you for choosing the Definitive Technology Mythos Solo Surround Array

Loudspeaker System featuring Spatial Array™ technology. The Mythos SSA-42 is a

unique speaker that provides a stunning 5-channel surround experience from just one

speaker. This extraordinary speaker makes enjoying a high performance surround audio

system mor convenient than ever before. You chose wisely.e

Our engineers spent many years developing this product. In order to ensure that you

experience the finest performance possible, we encourage you to take a moment to fully

read this owner’s manual and familiarize yourself with the proper installation and set-up

procedures for your Mythos SSA-42 speaker.

Definitive Technology

SSA-42

OWNER’S MANUAL

5. Use a bubble level to make sur the template is level. If the e

TV is wall mounted and not level, the speaker will look better

if it is off-level in exactly the same way as the TV.

6. Use push pins to secure the template to the wall.

7. Mark the location of pilot holes noted on the Mounting

Template with a pencil; remove the template.

8. Pre-drill the pilot hole locations for mounting screws

(not included). Use screws rated to hold securely in the

wall material (we recommend #10 screws).

9. It is best if at least one screw hits a wall stud. If there is no

stud behind the pilot hole location, install wall anchors (not

included) to secure the bracket screws. Follow the wall anchor

manufacturer’s directions. Each wall anchor should be rated

to hold at least one-half of the product net weight

[see specifications on front cover].

10. For masonr walls, use a masonry drill bit to pre-drill holes, y

and use masonry anchors and screws (not included).

11. Pull the five sets of speaker wires through the hole in the bracket.

12. Screw the bracket to the wall.

Wall Mounting the SSA

• We recommend that the SSA speaker be wall mounted

by professional installers or by those appropriately skilled in the

use of power tools and who have knowledge of building codes

and structural issues.

• We recommend that you determine a suitable location for

your speaker installation, and that you complete all wiring

(especially “hidden” in-wall wiring) before mounting the

bracket to your wall.

• Mythos Brackets are not suitable for ceiling mounting.

The Mythos Solo Surround Array loudspeaker comes with a wall

mounting bracket and template that makes secure mounting a breeze.

Follow these directions for installing the wall mounting bracket.

1. Two 1

⁄4"–20 screws have been factory installed on the back of the

speaker. Gently hand-tur the screws to make sur they ar in asn e e

far as they can go. Do not force them beyond the “stop” point.

The screws cannot screw all the way into the speaker and should

protrude as shown in the illustration.

2. Make sure the location you have selected for wall-mounting

does not conceal behind-wall electrical wiring or plumbing.

3. Hold the cardboard template (included) in the intended

location. Make sur the speaker clears the ceiling, adjacent e

walls, corners, beams, lighting fixtures and door/window

frames. Leave at least 11/2

" (38 mm) above the speaker location

to allow the speaker to slide down onto the bracket.

4. Make sure the center of the template is perfectly centered with

the TV screen.

Positioning the SSA

The SSA speaker may be mounted on

the wall above or below the video screen.

It may be placed on a table or shelf

in front of the TV.

If placed on a shelf under a TV, adjust the

leveling feet (screwed all the way in) to

aim the speaker up towards the listeners.

The SSA speaker may be placed directly

on top of TVs that have at least 5-inches

(13 cm) of flat surface on top. Do not

place the SSA speaker on top of any

surface that is not large or stable enough

to securely support the speaker. If the

speaker seems at all unstable or “tipsy”

place the speaker somewhere else. The

warranty does not cover damage

caused by falls due to improper

positioning of the speaker. If the

speaker is above seated listener height,

extend the leveling feet to point the

speaker downward [See Using the Leveling

Feet on page 3].

BACK OF SPEAKER

TOP OF SPEAKER

/ " –

20 SCREWS

THRE NSERTSADED I

+S URR OUN D RIGHT – + FRON T GHT – + CENT ER – + FR ONT LEF T – + SU RROU ND LEF T –RI

PILOT SLOTS

Even if you intend to place the SSA speaker on a TV or shelf you must attach the wall-mount bracket to the speaker. See Using the Leveling Feet on page 3.

13. When the wall mounting bracket is securely screwed to the wall, line

up the speaker’s protruding Mounting Screws with the keyhole slots

on the wall mounting bracket. Let the speaker slide straight down,

allowing the screw heads to slip behind the smaller end of the keyhole

slots. Gently push the bottom front edge of the speaker toward the wall

until the speaker snaps onto the lower lip of the bracket.

Mounting the SSA to an articulating TV bracket

If you have a Plasma or LCD TV that is attached to the wall via a

swing-out articulating bracket such as those offered by Chief, Sanus

and OmniMount, the SSA speaker may be attached to the bracket

without using the SSA wall-mount plate. Simply use 1

⁄4"–20 screws to

attach the SSA speaker directly to the TV bracket. Consult the TV

bracket manufacturer’s user manual for mor specific speaker e

mounting instructions.

Using the Leveling Feet

If you are going to use the speaker on a TV, shelf or table, first attach

the wall-bracket to the speaker as described above. Attach the two "L"

brackets to the wall-bracket using two M4 x 10 mm screws provided.

Thread the foot screws into the two "L" brackets and adjust to the

required height.

Connecting the SSA

Your Mythos SSA has one pair of 5-way binding posts for

each channel — Left Front, Right Front, Center, Left Surround

and Right Surround.

To start, strip 1/2" (3 mm) of insulation from

each speaker wir to expose the bare metal e

wire and twist each of the individual

conductors into single un-frayed strands.

Note that one of the terminals for each channel

is marked with red band (+) and the other is

marked with black band (–). Make certain that

you connect the wir om the red (+) tere fr minal

of your amplifier or receiver to the red (+) termi-

nal on your speaker and the wire from the black

(–) terminal of your amplifier or receiver to the

black (–) terminal on your speaker. Most speaker

wire has some indicator (such as color-coding, ribbing or writing)

on one of the two conductors to help you maintain consistency. It is

essential to connect all channels of the speaker to the amplifier in the

same way (in phase). If you experience a poor surround effect, it is

likely that one or more of the channels is connected in incorrect

polarity and needs to be rewired. Pay close attention and connect

positive to positive; negative to negative on all channels.

If you have a 6.1 or 7.1 channel receiver, connect the SSA’s surround

channel inputs to the “Surround” outputs of your receiver, not the “Rear”

or “Surround Back” outputs.

To connect wire to the binding post [see figure above], unscrew the knurled

nut and inser the bar wire into the hole near the base of the bindingt e

post. Do not insert the insulated part of the wire into the hole as this will

not give you a good connection. Twist the nut back down the binding post

until it firmly meets the wire. Do not over tighten.

Connect a single RCA cable from the “SUB OUT” of your receiver to

the LFE input of the subwoofer (not included). This connecting method

bypasses the subwoofer’s internal “crossover” or low pass filter and relies

on the crossover filter built into your receiver. NOTE: Make no other

signal connections. Do not use speaker wir to make the connection to e

the subwoofer

SSA-42

OWNER’S MANUAL

+ SURROUND RIGHT – + FRONT RIGHT – + CENTER – + FRONT LEFT – + SURROUND LEFT –

SSA-42

SUBWOOFER

15 040

Va ria b le

Low Pa ss Crossov er

120 V 80Hz T 3.2A L 250 V

Auto ma tic

Pow e r

O FFN/O

P r o C i n e m a

S u b w o f e ro

A c t i ve C r o s o v e rs

a n d P o w e r A m p l i f ie r

High Le vel

–

Lef t Right

LFE

Out

RECEIVER

AUDIO

MULTI INPUT

SUBWOOFER

(LFE)

OUTPUT

COMPONENT VIDEO

FRON LEFT FRON IGHT SURROUND RIGHTT T R

CENTER

SURROUND LEFT

IMPEDAN ELECTORCE S

VIDEO

+–+–+

–

+–

SPEAKERS

FRONT

RIGHT

–

L LEFT RIGHT EFT

CENTER SU U DRRO N

RIGHT FTLE

SU C /RR. BA K REAR

RIG

Product specificaties

Merk:	Definitive Technology
Categorie:	Speaker
Model:	Mythos SSA-42

Heb je hulp nodig?

Als je hulp nodig hebt met Definitive Technology Mythos SSA-42 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Definitive Technology

Definitive Technology Mythos ST Handleiding

19 Maart 2024

Definitive Technology ProCinema 1000 Handleiding

6 Juli 2023

Definitive Technology BPVX Handleiding

5 Juli 2023

Definitive Technology DT6.5R Handleiding

1 Juli 2023

Definitive Technology Demand D17 Handleiding

26 Juni 2023

Definitive Technology ProCinema 400 Handleiding

22 Juni 2023

Definitive Technology C/L/R 3000 Handleiding

21 Juni 2023

Definitive Technology Mythos ST-L SuperTower Handleiding

21 Juni 2023

Definitive Technology Disappearing DI 6.5S Handleiding

21 Juni 2023

Definitive Technology ProCinema 1200 Handleiding

21 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024