Definitive Technology Mythos Nine Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Definitive Technology Mythos Nine (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Unpacking Your Mythos Nine Speakers
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be reported
at once to your Definitive dealer or the delivery company that delivered your
loudspeaker. Please unpack your system carefully. Save all cartons and packing
materials in case you move or need to ship your system. Record the serial number
found on the back of the Mythos Nine in the appropriate place on the product
registration card, answer all questions and send it in.
VERY IMPORTANT: Accessories
Various parts and accessories that you will need to use your Mythos Nine are in the
carton but are easy to overlook. Open both ends of the shipping carton. Carefully
examine the contents of the shipping carton and packing material to find the plastic
bags with accessories.
Specifications
Mythos Nine
Dimensions: 28" long x 5.4" wide x 4.13" deep (711mm l x 137mm w x 105mm d)
(speaker only, not including bracket)
Weight: 13 lbs. (6 kG)
Sensitivity: 90 dB
Frequency Response: 38 Hz – 30 kHz
Nominal Impedance: 8 ohms
Driver Complement: Two each 412" (11.4cm) BDSS High output drivers pressure coupled to
two 412" x 8" (11.4cm x 20.3cm) Low Bass Radiators, One 1" (25mm)
ferro-magnetic fluid damped Pure Aluminum dome tweeter.
Specifications subject to change without notice.
Definitive Technology
MYTHOS NINE
OWNERS MANUAL
Mythos Nine Loudspeakers
Thank You
Thank you for choosing the Definitive Technology Mythos Nine Loudspeaker
System. Our engineers have spent many years in developing this product. In order
to ensure that you experience the finest performance possible, we encourage you
to take a moment to fully read this owner’s manual and familiarize yourself with
the proper installation and set-up procedures for your Mythos Nine speakers.
Definitive Technology
MYTHOS NINE
OWNER’S MANUAL
2. Make sure the location you have selected for wall-mounting
does not conceal behind-wall electrical wiring or plumbing.
3. The supplied cardboard mounting template is double-sided; one
side is for horizontal orientation and the other is for vertical
mounting. Be sure to face the correct side toward you. Hold the
cardboard template (included) in the intended location. Make
sure the speaker clears the ceiling, adjacent walls, corners, beams,
lighting fixtures and door/window frames. Leave at least
11
2" (38 mm) above or to the side of the speaker location to
allow the speaker to slide onto the bracket.
4. Make sure the center of the template is
centered with the TV screen’s center points.
5. When mounting the speaker horizontally
use a bubble level to make sure the template
is level. When mounting the speaker
vertically, use a plumb line to find perfect
vertical. If the TV is off-level or off plumb,
the speaker will look better if it is off-level
or plumb in exactly the same way as the TV.
6. Use push pins to secure the template to the wall.
Wall Mounting the Mythos Nine
We recommend that wall mounting of speakers be performed
by professional installers or by those appropriately skilled in the
use of power tools and the knowledge of building codes and
structural issues.
We recommend that you determine a suitable location for
your speaker installation, and that you complete all wiring
(especially “hidden” in-wall wiring) before mounting
brackets to your walls.
Mythos Brackets are not suitable for ceiling mounting.
The Mythos Nine loudspeaker comes with a wall mounting bracket and
template that makes secure mounting a breeze. Follow these directions
for installing the wall mounting bracket.
1. Two 1
4"20 screws have been factory installed on the back of
the speaker. Gently hand-turn the screws to make sure they are
in as far as they can go. Do not force them beyond the “stop”
point. The screws cannot screw all the way into the speaker and
should protrude as shown in the illustration.
Positioning the Mythos Nine
The Mythos Nine may be used vertically as a L&R main or surround
speaker or oriented horizontally and used as a center channel loudspeaker.
When used as a center speaker the
Mythos Nine may be mounted on the
wall above or below the video screen.
It may be placed on a table or shelf
in front of the TV.
If placed on a shelf under a TV, adjust the
leveling feet (screwed all the way in) to
aim the speaker up towards the listeners.
The Mythos Nine may be placed directly
on top of TVs that have at least 5-inches
(13 cm) of flat surface on top. Do not
place the speaker on top of any surface
that is not large or stable enough to
securely support the speaker. If the
speaker seems at all unstable ortipsy”
place the speaker somewhere else. The
warranty does not cover damage caused
by falls due to improper positioning of
the speaker. If the speaker is above seated
listener height, extend the leveling foot
to point the speaker downward
(See Using the Leveling Foot on page 3).
When used as L&R main or surround
speaker the Nine must be wall-
mounted flanking the screen as
illustrated. Allow at least 3 inches
(75 mm) between the edge of the
video screen and the nearest edge of
the speaker. If you need a speaker
that can be shelf-mounted, please
contact your Definitive Technology
retailer. Definitive offers other
models of Mythos Series speakers
that have shelf-mount stands.
2
PI LOT HO LE
PI LOT HO LE
Even if you intend to place the Mythos Nine on a TV or shelf, you must attach the wall-mount bracket to the speaker. See on page 3.Using the Leveling Foot
3”
(75 mm)
7. Mark the location of pilot holes noted on the Mounting Template
with a pencil; remove the template.
8. Pre-drill the pilot-hole locations for mounting screws (not
included). Use screws rated to hold securely in the wall material
(we recommend #10 screws).
9. It is best if at least one screw hits a wall stud. If there is no stud
behind the pilot hole location, install wall anchors (not included)
to secure the bracket screws. Follow the wall anchor manufacturers
directions. Each wall anchor should be rated to hold at least one-
half of the product net weight [see specifications on front cover].
10. For masonry walls, use a masonry drill bit to pre-drill holes, and
use masonry anchors and screws (not included).
11. Pull the speaker wires through the hole in the bracket.
12. Screw the bracket to the wall.
13. The bracket has two sets of keyhole slots, one set for vertical and
the other set for horizontal orientation. When the wall mounting
bracket is securely screwed to the wall, line up the speakers
protruding Mounting Screws with the appropriate keyhole slots on
the wall mounting bracket. Let the speaker slide straight down
(in horizontal alignment) or push the speaker sideways (vertical
alignment), allowing the screw heads to slip behind the smaller
end of the keyhole slots. Gently push the edge of the speaker
opposite the screw heads toward the wall until the speaker snaps
onto the lower lip of the bracket.
Mounting the Mythos Nine to an articulating
TV bracket
If you have a Plasma or LCD TV that is attached to the wall via a
swing-out articulating bracket such as those offered by Chief, Sanus
and OmniMount, the Mythos Nine speaker may be attached
to the bracket without using the supplied wall-mount plate. Simply
use 1
4"20 screws to attach the speakers directly to the TV bracket.
Consult the TV bracket manufacturer’s user manual for more
specific speaker mounting instructions.
Using the Leveling Foot
If you are going to use the Mythos Nine in horizontal mode on a shelf
or table, first attach the wall bracket to the speaker as described above.
Attach the one L bracket to the wall bracket using one M4 x 10mm
screw provided. Thread the foot screw into “L bracket and adjust to
required height.
Attaching the Logo Badge
Mythos Nine can be mounted either vertically as main or surround
speakers, or horizontally for use as a center channel speaker. The logo
badge is not pre-attached to the grille and is packaged in a plastic bag
along with the other accessories, and should be affixed in the correct
place on the grille once you have determined the speaker’s alignment.
For horizontal (center channel) use, align the badge with the location
on the long side of the grille (see illustration); for vertical use, align the
badge with the location on the short side of the grille. To affix the logo
badge, hold the grille in your hands as shown in the illustration. Using
your thumbs, carefully press the badge posts through the cloth and into
the two badge slot holes. The logo badge should snap into place. Do not
press the badge too hard or you may crack the grille.
Connecting the Mythos Nine
To connect the speaker to your receiver or amplifier, strip 1
2inch
(15 mm) of insulation from each conductor of the speaker wire to
expose the bare metal and twist each of the individual conductors into
single un-frayed strands.
MYTHOS NINE
OWNER’S MANUAL
3
AMPLIFIER OR
RECEIVER
Horizontal orientation
(center channel) badge slot
Vertical orientation
badge slot


Product specificaties

Merk: Definitive Technology
Categorie: Speaker
Model: Mythos Nine

Heb je hulp nodig?

Als je hulp nodig hebt met Definitive Technology Mythos Nine stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Definitive Technology

Handleiding Speaker

Nieuwste handleidingen voor Speaker