Defender ZE210027 Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Defender ZE210027 gratis online of download de PDF. Deze handleiding is 4 keer bekeken. Vraag over dit model? Stel een vraag

10kVA 3-Phase
Transformer
Safety, operation &
maintenance instructions
Introduction
Thank you for purchasing this Defender appliance.
This manual contains information necessary for safe
and eective operation of this appliance. This appliance
has unique features and, even if you are familiar with
similar appliances, it is necessary to read this manual
carefully to ensure you fully understand the instructions.
Ensure all users of the appliance read and fully
understand this manual. Keep these instructions with
the appliance for future reference.
Description of Symbols
The rating plate on your appliance may show
symbols. These represent important information
about the appliance or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
WARNING– To reduce the risk of injury,
user must read instruction manual
Caution!
Risk of electrocution! Dangerous voltage!
Class I construction (protective earth)
Isolating transformer for construction sites,
non-short-circuit proof, mid-point or
star-point earthed
Conforms to relevant legislation and safety
standards.
Environmental Protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
1
2
5
4
3
16A / 32A
Stock No. 34886
Part No. ZE210027

Technical
Abbreviations Key
VVolts
AC~Alternating current
A, mAAmpere, milli-Amp
HzHertz
W, kWWatt, kilowatt
VA, kVAVoltage ampere, kilovolt ampere
cos ϕPower factor
t
a
Maximum rated ambient
temperature
Specication
Supply voltage:
400 - 415V 3~
50/60Hz
Output voltage:110V~ 50Hz
Intermittent duty rated
output:
10000VA (10.0kVA)
Continuous duty rated output:7000VA (7.0kVA)
Vector group:Y (Wye winding)
Output current:
4 x 16A
2 x 32A
Protection class:
Ingress protection rating:IP44
Maximum rated ambient
temperature (t
a
):
20 - 30°C
Rated power factor:0.93cos ϕ
Duty cycle:
Intermittent duty
(5min on / 15min o)
Dimensions:
(H x L x W)
775 x 515 x 800mm
Weight:80kg
As part of our ongoing product development, specica-
tions
of Defender products may alter without notice.
General Safety Warnings
WARNING: Read all safety warnings, instructions,
illustrations and specications provided with this
appliance. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference
Note: This product is supplied without a power cord.
All references to cords within the following safety
information assume the correct and safe installation of a
suitable power cord or cords to the device..
The term “appliance” in the warnings refers to your
mains-operated (corded) appliance or battery-operated
(cordless) appliance.
1) General Safety
a) Keep appliance away from heat, sharp objects,
oil and other hazards.
b) Do not place the cord under carpets or other textile
coverings such as clothes or dust sheets.
c) Do not place the cord in areas where it may pose a
trip hazard.
d) Do not use the appliance if the cable or plug
is damaged.
e) Do not use the appliance if the switch does not
turn it ON and OFF. Any appliance that cannot be
controlled with the switch is dangerous and must be
repaired.
f) Ensure appliance is switched OFF before
connecting to mains power supply.
g) Disconnect the plug from the source before making
any adjustments, changing accessories, or storing
appliances. Such preventive safety measures reduce
the risk of starting the appliance accidentally.
h) Store idle appliances out of the reach of children
and do not allow persons unfamiliar with the
appliance or these instructions to operate the
appliance. Appliances are dangerous in the hands of
untrained users.
i) Maintain appliances and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may aect
the appliance’s operation. If damaged, have the
appliance repaired before use. Many accidents are
caused by poorly maintained appliances.
j) Children must not play with the appliance.
Cleaning and user maintenance must not be made
by children without supervision.
k) When moving from one place to another, consider
the weight of the appliance and use appropriate
haulage equipment.
l) Never block or cover the appliance’s ventilation
while energised or in operation. Good airow must
be maintained at all times to reduce any potential
re risk.
m) When moving from one place to another, consider
the weight of the product.
2) Electrical safety
a) Appliance plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) appliances.
Unmodied plugs and matching outlets will reduce
risk of electric shock.
b) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the appliance.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
c) Always check that the power supply corresponds
to the voltage on the rating plate.
3) Service
a) Have your appliance serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the appliance is
maintained.
Transformer
Safety Warnings
WARNING: Read all safety warnings, instructions,
illustrations and specications provided with this appliance.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury.

•Transformers generate heat in operation. This is normal
and not a fault with the device. Do not use on areas which
are combustible or may be damaged by heat such as
carpets, vinyl ooring or ooring tiles.
• ALWAYS ensure the transformer plug is tted with the
indicated fuse (see Specication).
• Position transformer close to the 230V supply. Do not
supply the transformer via an extension cable.
•Ensure there is adequate access to the transformer
to enable regular inspection for prevention of re and
other hazards.
• Do not leave electrical equipment near ammable
materials.
• Ensure adequate measures for re prevention and
protection are in place.
•Do not use the transformer if damaged.
•All repairs to the transformer must be carried out by a
fully qualied technician.
• If the thermal cut-out/short circuit protector requires
replacement, it must be replaced using the correct unit
from the manufacturer or manufacturer’s agent.
Even when used as prescribed it is not possible to eliminate
all residual risk factors. Use with caution. If you are at all
unsure of the correct and safe manner in which to use this
appliance, do not attempt to use it.
Product Familiarisation
1. Positioning Handles
2. 110V 16A Outlets
3. 110V 32A Outlets
4. MCB Control Switches
5. MCB (Miniature Circuit Breaker) Cover
Intended Use
Portable isolation transformer ideal for use with heaters.
Transforms 400-415V input to 110V via 16A and 32A
outputs. Allows the use of 110V compatible tools and
appliances. For site use.
The product must ONLY be used for its intended purpose.
Any use other than those mentioned in this manual will
be considered a case of misuse. The operator, and not
the manufacturer, shall be liable for any damage or injury
resulting from such cases of misuse. The manufacturer shall
not be liable for any modications made to the product,
nor for any damage resulting from such modications.
Unpacking Your Product
•Carefully unpack and inspect your product. Familiarise
yourself with all its features and functions.
•Ensure that all parts of the product are present and in
good condition. If any parts are missing or damaged,
have such parts replaced before attempting to use
this product.
Before Use
Ensuring the transformer
is suitable
Before using the transformer with a selected power tool or
appliance, check that it is suitable for the tool and task.
•Use the transformer ratings plate for guidance. The
transformer ratings plate is marked with the duty cycle.
• The values for continuous rating will be approximately
50% of the intermittent rating so take this into account
if the tool will be used for a longer period than the
intermittent rating given in the duty cycle.
Note: Operating conditions such as applied voltage (voltage
supplied to the transformer), the power factor of the tool
and ambient temperature may eect the performance of
the transformer.
Wiring the plug
WARNING: This appliance is only suitable for wiring
directly into a power source.
WARNING: Only qualied persons should undertake
the task of installing a cable into this appliance. Select a
cable that is suitable for the ratings of this transformer
(see ‘Specication’).
• If operating the transformer up to its 7.0kVA continuous
rating, a supply current of approx. 11A is required.
• If operating the transformer up to its 10.0kVA
intermittent rating, a supply current of approx.
13A is required.
Operation
Connection
1. Locate a suitable 230V power supply. Locate a suitable
230V power supply and ensure that no power is being
supplied.
2. Place the transformer near the selected outlet.
WARNING: Do not use an extension lead to connect the
transformer to the power supply.
2. Connect the transformer and switch ON the power
supply. The transformer is now ready for use.
Note: If using with a heater, take care to ensure the
transformer is situated an appropriate distance from the
other appliance. This will allow the transformer to function
more eectively.
Disconnection
1. Switch the power supply OFF.
2. Disconnect the transformer.
Resetting the MCB
• To reset the overload/short circuit protector, press the
OL/SC Protector Reset Button (4).
Note: The MCB may trip for several reasons (see
Troubleshooting). To prevent the MCB operating again,
check that there are no underlying issues.
1. Switch the power supply OFF and remove any tools
plugged into the outlets.
2. Turn the buttery nut on the MCB Cover (5)
anti-clockwise to release the cover.
3. Push the MCB Control Switch (4) labelled ‘INCOMING’ to
the OFF position by pushing the switch down.
4. Check for any other tripped MCB Control Switches in the
OFF position. If present, return them to the ON position
by pushing the aected switches back up.
Note: Noting the position of any tripped switches
amongst the outlets could indicate the location of any tool
responsible for causing the outage.
5. Switch the MCB Control Switch labelled ‘INCOMING’
back to the ON position
6. Switch the power supply back ON.
7. Close the MCB Cover and turn buttery nut clockwise
tightly to secure.
Product specificaties
| Merk: | Defender |
| Categorie: | Niet gecategoriseerd |
| Model: | ZE210027 |
Heb je hulp nodig?
Als je hulp nodig hebt met Defender ZE210027 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden