Defender E203030 Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Defender E203030 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
3.3kVA Step Up
Transformer 16A
Safety, operation &
maintenance instructions
1
2
4
3
230V
Stock No. 35001 Part No. E203030
Introduction
Thank you for purchasing this Defender appliance.
This manual contains information necessary for safe
and eective operation of this appliance. This appliance
has unique features and, even if you are familiar with
similar appliances it is necessary to read this manual
carefully to ensure you fully understand the instructions.
Ensure all users of the appliance read and fully understand
this manual. Keep these instructions with the appliance for
future reference.
Description of Symbols
The rating plate on your appliance may show symbols.
These represent important information about the product
appliance or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
WARNING– To reduce the risk of injury,
user must read instruction manual
Caution!
Risk of electrocution! Dangerous voltage!
Class I construction (protective earth)
Isolating transformer for construction sites, non-
short-circuit proof, mid-point or star-point earthed
Conforms to relevant legislation and safety
standards.
Environmental Protection
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice.
Technical
Abbreviations Key
VVolts
AC~Alternating current
A, mAAmpere, milli-Amp
HzHertz
W, kWWatt, kilowatt
VA, kVAVolt Ampere, kilovolt Ampere
cos ϕPower factor
t
a
Maximum rated ambient
temperature
Specication
Supply voltage:110V~ 50/60Hz
Output voltage:230-240V~ 50Hz
Intermittent duty rated
output:
3300VA (3.3kVA)
Continuous duty rated output:1650VA (1.65kVA)
Output current:2 x 16A
Protection class:
Ingress protection rating:IP44
Maximum rated ambient
temperature (t
a
):
20°C
Rated power factor:0.93cos ϕ
Duty cycle:
Intermittent duty
(5min on / 15min o)
Input plug fuse:16A
Cord length:1.7m
Dimensions (H x L x W):190 x 240 x 260mm
Weight:18kg
General Safety Warnings
WARNING: Read all safety warnings, instructions,
illustrations and specications provided with this
appliance. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “appliance” in the warnings refers to your
mains-operated (corded) appliance or battery-operated
(cordless) appliance.
1) General Safety
a) Keep appliance away from heat, sharp objects,
oil and other hazards.
b) Do not place the cord under carpets or other textile
coverings such as clothes or dust sheets.
c) Do not place the cord in areas where it may pose a
trip hazard.
d) Do not use the appliance if the cable or plug
is damaged.
e) Do not use the appliance if the switch does not
turn it ON and OFF. Any appliance that cannot be
controlled with the switch is dangerous and must
be repaired.
f) Ensure appliance is switched OFF before
connecting to mains power supply.
g) Disconnect the plug from the source before making
any adjustments, changing accessories, or storing
appliances. Such preventive safety measures reduce
the risk of starting the appliance accidentally.
h) Store idle appliances out of the reach of children
and do not allow persons unfamiliar with the
appliance or these instructions to operate the
appliance. Appliances are dangerous in the hands
of untrained users.
i) Maintain appliances and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may aect
the appliance’s operation. If damaged, have the
appliance repaired before use. Many accidents are
caused by poorly maintained appliances.
j) Children must not play with the appliance. Cleaning
and user maintenance must not be made by children
without supervision.
k) When moving from one place to another, consider
the weight of the appliance and use appropriate
haulage equipment.
l) Never block or cover the appliance’s ventilation
while energised or in operation. Good airow must
be maintained at all times to reduce any potential
re risk.
2) Electrical safety
a) Appliance plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) appliances.
Unmodied plugs and matching outlets will reduce
risk of electric shock.
b) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the appliance.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
c) Always check that the power supply corresponds
to the voltage on the rating plate.
3) Service
a) Have your appliance serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the appliance
is maintained.
Transformer
Safety Warnings
WARNING: Read all safety warnings, instructions,
illustrations and specications provided with this appliance.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury.
•Transformers generate heat in operation. This is normal
and not a fault with the device. Do not use on areas which
are combustible or may be damaged by heat such as
carpets, vinyl ooring or ooring tiles.
• The transformer is tted with a thermal cut-out switch.
If the switch operates repeatedly, check that the rated
current of the power tool or appliance being used
with the transformer does not exceed that of the
transformer fuse.
• ALWAYS ensure the transformer plug is tted with the
indicated fuse (see Specication and plug markings).
•Position transformer close to the 230V supply. Do not
supply the transformer via an extension cable.
•Ensure there is adequate access to the transformer
to enable regular inspection for prevention of re and
other hazards.
• Do not leave electrical equipment near ammable
materials.
• Ensure adequate measures for re prevention and
protection are in place.
•Do not use the transformer if damaged.
• If the external exible cable or cord of this transformer
is damaged, it shall be replaced by the manufacturer or
their service agent or a similarly qualied person in order
to avoid a hazard.
• All repairs to the transformer must be carried out by a
fully qualied technician.
•If the thermal cut-out/short circuit protector is in need of
replacement, it must be replaced using the correct unit
from the manufacturer or manufacturer’s agent.
Even when used as prescribed it is not possible to eliminate
all residual risk factors. Use with caution. If you are at all
unsure of the correct and safe manner in which to use this
appliance, do not attempt to use it.
Product Familiarisation
1. Carry Handle
2. 230V 16A Outlets
3. 110V Input Cable
4. Overload/Short Circuit Protector Reset Button
Intended Use
Portable step-up isolation transformer with industrial plug.
Enables users to operate 240V 16A tools by attaching to
a 110V electrical circuit. It features 2 x 16A sockets that
can be used with corded products such as SDS drills, small
demolition hammers, 4.5” angle grinders, jigsaws and
circular saws, numerous lighting products, industrial fans,
dehumidiers and fume extractors. For site use.
The tool must ONLY be used for its intended purpose.
Any use other than those mentioned in this manual will
be considered a case of misuse. The operator, and not
the manufacturer, shall be liable for any damage or injury
resulting from such cases of misuse. The manufacturer shall
not be liable for any modications made to the tool, nor for
any damage resulting from such modications.
Unpacking Your Appliance
•Carefully unpack and inspect your appliance. Ensure all
parts of the appliance are present and in good condition.
• If any parts are missing or damaged, have such parts
replaced before attempting to use this appliance.
Before Use
Ensuring the transformer
is suitable
Before using the transformer with a selected power tool or
appliance, check that it is suitable for the tool and task.
•Use the transformer ratings plate for guidance.
The transformer ratings plate is marked with the
duty cycle.
• The values for continuous rating will be approximately
50% of the intermittent rating so take this into account
if the tool will be used for a longer period than the
intermittent rating given in the duty cycle.
Note: Operating conditions such as applied voltage
(voltage supplied to the transformer), the power factor
of the tool and ambient temperature may aect the
performance of the transformer.
Product specificaties
| Merk: | Defender |
| Categorie: | Niet gecategoriseerd |
| Model: | E203030 |
Heb je hulp nodig?
Als je hulp nodig hebt met Defender E203030 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden