Daytronic 5M40 Handleiding

Bekijk gratis de handleiding van Daytronic 5M40 (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Daytronic 5M40 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

The Model 5M40 is a single-channel conditioner which accepts any AC or unipolar

pulse input, irrespective of waveform, from turbine flow meters, magnetic pick ups or

similar frequency-generating transducers. The frequency source can be grounded or floating.

For environments which may have high frequency noise or a DC offset on the input signal,

the 5M40 contains input suppression and DC offset capacitive coupled signal terminals.

When used with an open-collector type sensor, the 5M40 requires a pull-up resistor

(typically 10k Ohms) between + Signal and + Excitation.

1GENERALDESCRIPTIONANDSPECIFICATIONS

Model 5M40 Frequency Module

Access switch settings via the front

panel of the 5M40 by gently pulling the

clear plastic cover (from the bottom

side) so the cover rotates open from

5M40

DIN Frequency Conditioner

MODEL5M40

Frequency

C

ONDITIONERModule

1.A.1.5M40

GENERALDESCRIPTIONANDSPECIFICATIONS5M40.1

or without power to the unit. Once

completed, return the cover to the

View of Side Label of the Model 5M40 Frequency Module

the top. Use a small tool or finger to

place the switches to the left or right

position as you face the front of the

module. This process can be done with

original position.

Sensitivity Operation

The 5M40 contains four selectable input

sensitivity ranges which allows the user

to accommodate input signal levels to

the 5M40's "Smart Schmitt" trigger circuit

flow turbine meters) and up to inputs as high

as 250 Volts as seen in magnetic speed

sensors.

The Model 5M40 is calibrated by means of a “two-point (dead-weight)” process involving

a known frequency standard or through the use of the "F CAL" reference provided.

92340.00

for signals as low as 50 millivolts ( i.e. low

Product specificaties