Dasqua 1804-1025 Handleiding

Bekijk gratis de handleiding van Dasqua 1804-1025 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over Dasqua 1804-1025 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Internal measuring Jaws

PRODUCT FEATURES

OPERATION MODE

PARAMETER

Please read the product instruction caroduct correctly under the instructionefully and use the pr

Depasurementth meIntasurementernal meExtasurementernal meStep measurement

Battery compartment

Lewocking scr

Extra Large LeenCD scr

Inch & Metric Scale

Depth blade

Thumb Roller

mm/in/F

Zero

On/Off

External measuring Jaws

COOLANT&FLUID

IP54

Beforase make sure that the battery is installed.e use, ple

1.Rotate the locking screw unclockwise to release the lock of the caliperand the caliper can be moved.,

2.Turn on to check if the caliper work well.

3ffbut.-Clean the measuring surface of the measuring tool,close the meopriate force, shortess on/o ton to turnasuring claw with apprpr

on andsefft zeroand the caliper can be used normallysize of dierent parts can be measured by following operation., ,

53.3 mm/2.098 in

Measuring Range

0-150mm/0-6"

0-200mm/0-8"

0-300mm/0-12"

Resolution0.01mm/0.0005"/1/128"

Accuracy

+/-0.02mm/0.001"(0-100mm)

+/-0.03mm/0.001"(100-200mm)

+/-0.04mm/0.0015"(200-300mm)

Max. measuring speed3m/s

Power1 x CR2032 3V battery

Maximum HumidityUp to 80% non-condensing

Operating Temperature and Storage Temperature0-40°(32-104°F) / -10-60'C(14-140°F)

Display

53.3X 21mm extra large LCD display

PRODUCT INSTRUCTION

REPLATTERYCE BA

Step 1

Step 2Step 3 Step 4

1.Use screo w driver t

open the battery

compartment

2.Take out the used

battery

3.w batteryPut the ne

inside the

compartment

4.Use screo w driver t

fix the battery

compartment and

finished

CAUTION AND WAR

Although you ooducte any other electronic productopriate attention is necessarywn the high-quality pr, lik, appr

1.The product belongs to the precise measuring tool, please avoid the product contact with liquid or exposurt disassemble or e in sunshine, do no

.coductollide the pr

2.About the battery:forbid to chargattery must be disposed according to the local laws and regulations.e or burn, the old b

3.In order to ensure the good condition of measuring tool fan the oil contaminationor long time, cle

and liquid on the measuring toolwith the soft cloth after using.

4..lf you do not use fase take out the batteryor a long time, ple

This producy children unsupervised.t should never be used b

DANGER TO LIFE AND RISK OF ACCIDENT FOR TODDLERave children alone and unsuperS AND CHILDREN! Never levised with the

packterial.aging ma

FAILURE REMOVAL

When the number twinkles on the screen is displayed on the screen, please change

the battery.

old battery

new battery

INGESTION HAoduct contains a button cell or coin batteryZARD: This pr.

DEAy can ocested.TH or serious injurcur if ing

A swallowed button coin battery can cause ell or cIntal ernal Chemic

Burns

in as little as 2 hours.

KEEP new and used battCH Of CHILDRENeries OUT OF REA

Seek immediate medical attention.if a battery is suspected to be swallowed or insertart of the bodyed inside any p

WARNING

a)Remove and immediately ryatteries according to local regulations and keep away from children. Do NOT dispose ofeccle or dispose of used b

battash or incinerate.eries in household tr

b)Even used battause severe injurath.eries may cy or de

c) Calla local poison control center for treatment information.

d)Baterty type: CR2032

e)Nominal battery voltage: V3

fechargeable batte not to be recharged.)Non-reries ar

gDo not force discharge, rechargat above (manufacturer's specied temperature ratingor incinerate.Doing so may result n )) e, disassemble, hefi

injury due to venting,leakage or explosion ral burns.esulting in chemic

h)Ensure the batteries are installed correctly according to polarity (+ and-).

i)Do not mix old and new batteries, different bratteries, such as alkaline, carbon-zinc, or rechargeable batteries.ands or types of b

j) Remove and immediately recycle or dispose of batteries from equipment not used for an extcording to local regulations.ended period of time ac

k) Always completely secure the battery compartmentattery compt close securelytop using the productemove the. , , Ifthe bartment does nosr

batteep them away from children.eries, and k

RESISTANT

1.

PRODUCT INSTRUCTION

Product specificaties