Daikin BRE49B2F Handleiding

Bekijk gratis de handleiding van Daikin BRE49B2F (1 pagina’s), behorend tot de categorie Airco. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over Daikin BRE49B2F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1P383776-1B

●Perform the following steps to confirm that the sensor kit is correctly connected.

1. After turning on the power, confirm that no infrared presence or infrared floor sensor errors (error codes: CE-01 through CE-04) are present upon pressing the

ON/OFF button on the remote controller.

2. Operate the remote controller to confirm that the functions only supported on models equipped with an infrared presence sensor listed in the“Main Menu List”or“Full Menu”in the remote

controller operation manual are indicated on the remote controller menu. (Example: “Auto airflow”, “Draft prevention”, etc.)

3. Confirm that the functions as confirmed in step 2 above operate correctly.

(Note) Swing control using the infrared presence sensor is not available when using the air conditioner for frontal air discharge only by means of flexible ducts or other accessories.

●Make sure that all installation work for the indoor unit has been completed.

Sensor kit connection check

1P383776-1B

Product specificaties