Airrex AHSC-140P 460/3 Handleiding


Pagina's 20 Airco

Bekijk de handleiding van Airrex AHSC-140P 460/3 gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag

▶ It is essential that you read ‘SAFETY INSTRUCTIONS’ carefully
before use and follow them at all times.
▶ We have a policy of continual improving on our products.
The contents (features and specifications) in this manual are
therefore subject to change without notice.
▶ The warranty form is on the last page. Please complete it
now and keep it in a safe place.
▶ Keep this manual on hand for reference.
Before operation, please read this user’s manual carefully.
MODEL : AHSC-140P 460/3
USER'S MANUAL
▶ This unit is specified for use on the rated voltage
power supply.
C
AIR CONDITIONER
WITH ELECTRIC HEAT
2
TABLE OF CONTENTS
The following instructions are to ensure user’s safety and to prevent any physical
injury or material damage. Please read carefully and follow all instructions.
There are two sections to these instructions: WARNING and CAUTION.
■SAFETY INSTRUCTIONS
■GENERAL ADVICE BEFORE USE
■EXTERIOR DESCRIPTION
■ SPECIFICATIONS
■ CONTROL PANEL FUNCTIONS
■ MODE CHANGING METHOD
■HOW TO SET THE 'OFF' TIMER
■ TEMPERATURE CONTROL OPERATION
■
SELECTION
■ 'ERROR' and WARNING INDICATORS
■ FIRE ALARM & ERROR SIGNAL CONNECTION
■ ECONOMY MODE
■ TROUBLE SHOOTING
■ MAINTENANCE
■ OUTDOOR FAN GREASE INJECTION GUIDE
■ ACCESSORIES
■WARRANTY
3 ~ 4
4
5
6
7
8
9
10
11
12 ~ 13
14
15
16
17
18
19
20
3
SAFETY INSTRUCTIONS
Keep this manual in a visible location near the unit for easy reference.
Use a circuit breaker capacity. that fits the
(It may cause fire and electric shock)
Do not use a damaged power cable.
(Short, fire or shock hazard)
Before cleaning, disconnect the unit.
(Otherwise risk of electric shock)
Do not place anything on top of the machine.
(This could cause electric shock, malfunction or injury)
Do not use an extension lead unless of the approved type.
(Risk of fire and / or electric shock)
Do not kink or sharply bend the power cable nor put any weight on it.
(The insulation may be damaged causing fire or electric shock)
Turn off control panel after turn off circuit breaker first.
(Risk of electric shock and / or malfunction)
Do not use this unit on unstable or inclined surfaces. Always use
on solid flat floor. (Risk of falling causing injury, fire or malfunction)
Do not use the unit in explosive environments or in areas where flammable gas
leakage may occur.
Unlock the casters and push the unit to a flat surface and set the caster brakes to the locked position.
If the power cord or plug is damaged, repair should only be performed by qualified
electrical personnel.
Do not connect/disconnect the power cord or attempt to operate buttons with wet hands.
This could result in electrical shock.
Do not use the unit in a corrosive atmosphere.
Do not install the unit on uneven or sloping surface. The unit may roll or topple over
even if the casters are set to the locked position.
Do not use the unit in areas where it will be exposed to rain or water.
WARNINGS REGARDING PROPER LOCATION FOR INSTALLATION
MOVING THE UNIT
Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are present, wipe off
with a clean, dry cloth.
Check the power cord, plug and prongs for damage or overload.
If any damage or overload is found, contact a qualified repair technician or a qualified electrician to perform
replacement or repair of the power cord, plug or prongs.
PLUGGING IN THE UNIT
The following symbols are for your guidance:
= You must NOT.= You MUST.
WARNING
INSTALLATION

Beoordeel deze handleiding


Alle foutcodes Airrex Airco 8 foutcodes uit 11 handleidingen, met hun betekenis.

Product specificaties

Merk: Airrex
Categorie: Airco
Model: AHSC-140P 460/3

Heb je hulp nodig?

Als je hulp nodig hebt met Airrex AHSC-140P 460/3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden